1993 Volkswagen Fox Oil and Lubricants
More 1993 Volkswagen Fox Oil and Lubricants Categories
If you’re looking for an original Oil and Lubricants replacement for a 1993 Volkswagen Fox, you can search through our selection below. You’ll also find aftermarket and OEM Oil and Lubricants to meet your needs.
Essential 1993 Volkswagen Fox Oil and Lubricants
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 1 Quart (Part No.797976)
from
$9.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
- Refresh aging seals and prevent leaks with seal conditioners
- Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
- Enhanced friction performance helps maximize power with advanced friction-fighting agents
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.
Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart (Part No.VV935)
from
$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.
Product Features:
See More
Product Features:
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- Enhanced Oil Stability: This motor oil resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
- Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents to maintain engine health and efficiency.
FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F640-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5 Qt Conventional 5W20 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F610-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
Castrol – EDGE High Mileage 5W-20 Advanced Full Synthetic Engine Oil: 5 Quart (Part No.15906D)
from
$38.99
Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.
Product Features:
See More
Product Features:
- Patented phosphorus replacement technology to help extend the life of your emission system
- 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
- 6x better wear protection (as measured in latest sequence iva engine test)
- 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
- Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
- Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.
FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: No Oil Keeps Engines Cleaner, 1 Quart (Part No.15A66C)
from
$9.99
Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend the life of your engine
- 1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
- Double-Action Formula: Castrol Ultraclean’s unique double-action formula effectively cleans away existing sludge and prevents new sludge formation, ensuring optimal engine performance.
- Enhanced Engine Life and Performance: Designed to combat environmental factors like poor fuel quality, hot weather, and stop-start driving conditions, which can reduce engine life, power, and fuel economy.
- Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils, offering superior protection and performance in a 5W-30 SAE oil weight.
- Cleanest GTX Ever: Marketed as Castrol’s cleanest GTX oil, ensuring that no other oil keeps engines cleaner, making it an ideal choice for maintaining engine cleanliness and efficiency.
Castrol – GTX Ultraclean 5W-20 Synthetic Blend Motor Oil: 5 Quart (Part No.15A69C)
from
$29.99
Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.
Product Features:
See More
Product Features:
- 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Premium-quality base oils and anti-wear additives that help extend the life of your engine
- Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
- Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
- Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
- Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.
Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil: 5 Quart (Part No.1597B0)
from
$30.99
Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
- Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
- Synthetic Blend Composition: Castrol GTX High Mileage Motor Oil is a synthetic blend, offering the benefits of both conventional and synthetic oils for superior engine protection.
- Extended Engine Life: Designed to protect against sludge, wear, and burn-off, this motor oil helps extend the life of high mileage engines.
- Optimal Viscosity: With an SAE oil weight of 10W-30, this motor oil provides excellent performance in a wide range of temperatures, ensuring reliable engine protection.
Castrol – GTX 20W-50 Conventional Motor Oil: Helps Protect Against Sludge Build Up, 1 Quart (Part No.151A8E)
from
$9.99
Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.
Product Features:
See More
Product Features:
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge (when tested in engines with a high level of sludge)
- Helps minimize oil consumption
- Meets ILSAC GF-6 specs
- Superior Performance: Exceeds tough industry standards in protecting against new oil splatter formation, providing superior performance and reliability.
- Versatile Use: Suitable for a variety of driving conditions including heavy traffic, poor fuel quality, and harsh environments, making it a versatile choice for many vehicles.
- High-Quality Composition: This conventional motor oil with SAE weight 20W-50 offers robust protection and performance, maintaining engine health and efficiency.
Pentosin – HP 5W-30 Synthetic Engine Oil meets service class API SL,CL (Part No.8043206)
from
$79.99
Pentosin HP 5W-30 Synthetic Motor Oil is a high-performance engine oil that is fully synthetic and designed for modern vehicles with extended oil service intervals. It is suitable for use in both gasoline and diesel engines, including those with turbochargers, as well as non-turbocharged vehicles that require 5W-30 oil. This all-season motor oil offers excellent protection against motor oil sludge and fuel deposits, and it contains special friction modifiers that help to reduce engine wear. Pentosin HP 5W-30 Synthetic Motor Oil is formulated for long service life intervals, making it an ideal choice for drivers who want to keep their engines running smoothly and efficiently. It meets service class API SL,CL.
Product Features:
See More
Product Features:
- An all- season engine oil offering great protection against harsh start-up conditions and extreme temperature changes.
- Formulated for long service life intervals.
- Reduces engine oil sludge and fuel deposits.
- Contains special friction modifiers which help the engine run smoothly and improve fuel economy.
- Fully Synthetic Formula: Pento High Performance Engine Oil is made with a full synthetic formula, providing superior protection and performance for your engine.
- Meets API SL/CL Specs: This engine oil meets the latest API SL/CL specifications, ensuring that it meets the highest standards for engine protection and performance.
Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart (Part No.154BC4)
from
$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.
Product Features:
See More
Product Features:
- Optimized to deliver 40% better performance than required by acea standards
- Recommended by world leading auto manufacturers
- Engine protection for the entire drain interval even under extreme pressure of high output engines
- Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
- Formerly known as castrol slx
- Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
Castrol – EDGE 5W-20 Full Synthetic Engine Oil 1 Quart (Part No.152C82)
from
$11.99
CASTROL EDGE 5W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for drivers who want the best engine performance. This oil is Castrol’s strongest oil, formulated with Fluid TITANIUM Technology, which provides maximum sludge protection, wear protection, and engine performance. It is 3X stronger against viscosity breakdown than traditional oils, 10X better in high-temperature performance, and 6X better in wear protection. This oil meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, and other industry standards. It is a full synthetic oil with an SAE weight of 5W-20, which means it is suitable for use in most modern engines. With Castrol EDGE, you can unlock maximum performance with every drive.
Product Features:
See More
Product Features:
- 3x stronger against viscosity breakdown than the leading full synthetic – based on kurt orbahn test in 5W-30 grade
- 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
- 6x better wear protection – as measured in seq iva test vs. latest test limit
- Meets api sp/sn plus, ilsac gf-6, acea a1/b1, acea c5, gm dexos1 gen 2, meets ford wss-m2c960-a1 and wss-m2c945-b1, meets engine test requirements of chrysler ms 6395
- Syntec Power Technology: The reformulated EDGE Engine Oil with Syntec Power Technology provides even better performance, making it the perfect choice for drivers who demand the best from their engines.
- Full Synthetic Oil Composition: The oil composition of EDGE Engine Oil is full synthetic, providing superior protection against sludge buildup and wear, ensuring maximum engine performance.
Castrol – GTX Magnatec 10W-30 Synthetic Blend Motor Oil (1 Quart) (Part No.15B0B4)
from
$9.49
The intelligent molecules in Castrol GTX MAGNATEC are what set it apart from other engine oils. These ultra-refined molecular components cling to the engine throughout all driving conditions, even when the engine is off. When the engine stops, oil drains back to the sump, but the intelligent molecules in Castrol GTX MAGNATEC don’t. They cling to critical engine parts like a magnet, providing an extra layer of protection from the start and throughout warm-up. Only Castrol GTX Magnatec is uniquely formulated to provide instant protection from the moment of start.
Product Features:
See More
Product Features:
- Cling to critical engine parts when the oil drains down
- Add a layer of protection during warm-up and beyond
- Dramatically reduce engine wear
- Leave critical engine parts 4X smoother
Febi – 02582 grease (for input shaft) 90g (Part No.K600164873FEB)
from
$6.75
Febi stands for Solutions Made in Germany and is one of the leading manufacturers and suppliers of car and truck spare parts in the independent aftermarket.
Product Features:
See More
Product Features:
- Original Febi spare parts
- Proven OE: Febi fulfills all eligibility requirements
- High driving comfort through the use of perfectly matched materials and impeccable design
Popular 1993 Volkswagen Fox Oil and Lubricants Categories
1993 Volkswagen Fox Oil and Lubricants
You count on your 1993 Volkswagen Fox to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Oil and Lubricants. With 79 Oil and Lubricants ranging in price from $5.87 to $114.99, you’re sure to find everything you need for your 1993 Volkswagen Fox.
Brands matter. If you want to shop a specific Oil and Lubricants brand, we stock 9 different brands like Castrol, Fram, and Valvoline. 1993 Volkswagen Fox Oil and Lubricants start as low as $5.87!
One of the best ways to find top quality OEM or aftermarket Oil and Lubricants is by asking professionals. Short of that, you can shop with confidence thanks to our 34,440 extensive product reviews on 1993 Volkswagen Fox Oil and Lubricants. Some of the top-rated Oil and Lubricants products we carry are Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart with 4.9 stars and Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart with 4.9 stars.
Did we mention you can order your Oil and Lubricants from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Oil and Lubricants inventory for your 1993 Volkswagen Fox below to get started!
Top-Rated Oil and Lubricants Brands For Your 1993 Volkswagen Fox
Trusted Oil and Lubricants OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Volkswagen Fox running right for years to come. In our inventory you’ll find brands like Castrol, Fram, Valvoline, and even more.
Popular Royal Purple Oil and Lubricants
You’ll find popular Royal Purple brand products across Motor Oil. All are waiting to get your 1993 Volkswagen Fox back on the road. Some of the top-rated Royal Purple products in these categories are:
Top-Rated Castrol Oil and Lubricants
If Castrol are what you’re looking for, our inventory holds plenty. We stock Castrol brand Oil and Lubricants for your 1993 Volkswagen Fox, and some of our most reviewed Castrol parts include:
from
$10.49
(670)
GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart
Engine Oil
FAQs for 1993 Volkswagen Fox Oil and Lubricants
What are the most purchased Oil and Lubricants for the 1993 Volkswagen Fox?
Out of 79 Oil and Lubricants for the 1993 Volkswagen Fox, the most popular in our inventory are:
from
$27.99
This product is not rated
Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart
Engine Oil
What are the top-rated 1993 Volkswagen Fox Oil and Lubricants?
Top-rated Oil and Lubricants for your 1993 Volkswagen Fox based on customer reviews/ratings are:
from
$36.99
(690)
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 5 Quart
“convienent”
from
$11.49
(690)
Advanced Full Synthetic 5W-30 Engine Oil: Maximizes Engine Life, 1 Quart
“Works great!”
from
$11.49
(690)
Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart
“I have always used Valvoline oil with very good luck so to find it at a very good price that’s great.”
