Name: Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 5 Quart
Brand: Valvoline
SKU: 881169
Price: 37.99 USD
Rating: 5.0 (367 reviews)

from

$37.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

from

$11.99

Castrol EDGE 5W-30 A3/B4 is formulated for highly tuned four cylinder and latest technolgy engines that operate at higher temperatures. It’s exceptional characteristics ensure that all engine components from the valve train to the bearings are fully lubricated to provide the strenght for maximum engine performance

from

$13.49

Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).

Product Features:

Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA A5/B5, ACEA C2, Ford WSS-M2C961-A1, Meets engine test performance of Chrysler MS-6395 and MS-13340
10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
6X Better Wear Protection (Based on Seq IVA vs. latest test limit)

from

$5.89

Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:

Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
Works to provide outstanding engine wear protection under a variety of operating conditions
Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
Recommended for gasoline cars and light-duty trucks

from

$41.99

Castrol EDGE Extended Performance with Fluid TITANIUM Technology, is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance. Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear. Unlock maximum engine performance.

Product Features:

Extended drain interval of 20,000 miles or a full year (Whichever comes first)
10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

from

$25.99

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

from

$30.99

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

Phosphorus replacement technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

from

$11.49

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN

from

$11.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Extends engine life: Valvoline Full Synthetic High Mileage with MaxLife Technology is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown

from

$12.49

Castrol EDGE Euro Car 5W-30 A3/B4 Full-Synthetic Motor Oil transforms under pressure increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. Formulated for latest technology, high output engines that operate at extreme temperatures this fluid covers European OEM gasoline specifications for BMW, Mercedes-Benz, Porsche and VW/Audi.

Product Features:

Optimized to deliver 40% better performance than required by ACEA standards
Recommended by world leading auto manufacturers
Engine protection for the entire drain interval even under extreme pressure of high output engines
Meets API CF/SL, ACEA A3/B4, BMW LL 01, Meets Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, VW 502 00/505 00

from

$11.99

Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.

Product Features:

3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395

from

$37.99

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
MaxLife High Mileage Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing ultimate protection against wear, friction, heat, and deposits.

from

$25.99

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$11.99

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
6X Better Wear Protection
1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

from

$9.99

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

Superior protection against engine sludge (When tested in engines with a high level of sludge)
Advanced protection against viscosity and thermal breakdown
Premium quality base oils and anti-wear additives to help extend the life of your engine
Helps minimize oil consumption

from

$7.29

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

from

$12.99

CASTROL EDGE High Mileage 5W-30 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology that provides 10X better high-temperature performance and 6X better wear protection. The oil is designed with Phosphorus Replacement Technology that preserves the catalytic converter and the emission system. It meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and other OEM specifications. Castrol EDGE High Mileage is a full synthetic motor oil that offers superior performance and protection for high mileage engines. It is available in different grades, including 5W-20, 5W-30, and 10W-30. Try Castrol EDGE High Mileage today and extend the life of your engine.

Product Features:

10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
6x better wear protection – as measured in seq iva test vs. latest test limit
From the makers of the No. 1 high mileage brand
Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c961-a1 and wss-m2c946-b1, meets engine test requirements of chrysler ms 6395 and 13340
Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
Try castrol edge high mileage today

from

$25.99

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

Formulated with a unique combination of premium base oils and an enhanced additive system
Provides increased protection in higher mileage engines
Helps restore seal condition to reduce oil consumption
Increases protection against high temperature deposits and ring sticking
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

from

$9.99

Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

Premium-quality base oils and anti-wear additives that help extend the life of your engine
1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs

from

$7.49

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos®1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

from

$37.99

Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.

Product Features:

3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395

from

$29.99

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
Advanced protection against viscosity and thermal breakdown
Superior protection against high-temperature deposits
Premium-quality base oils and anti-wear additives that help extend the life of your engine

from

$6.49

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

from

$10.49

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

Phosphorus replacement technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs

from

$12.49

CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.

Product Features:

Optimized to deliver 40% better performance than required by acea standards
Recommended by world leading auto manufacturers
Engine protection for the entire drain interval even under extreme pressure of high output engines
Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
Formerly known as castrol slx
Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.

from

$10.49

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs

from

$25.99

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

1993 Plymouth Grand Voyager Motor Oil

More 1993 Plymouth Grand Voyager Motor Oil

Essential 1993 Plymouth Grand Voyager Motor Oil

Valvoline – Full Synthetic High Mileage with MaxLife Technology 5W-30 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.881169)

Castrol – EDGE 5W-30 A3/B4 Full Synthetic Motor Oil (Part No.15D452)

Castrol – EDGE Extended Performance Full Synthetic 5W30 Motor Oil 1 Quart (Part No.15D47E)

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.97025)

Castrol – EDGE Extended Performance 5W-30 Advanced Full Synthetic Motor Oil: 5 Qt (Part No.1597B1)

FRAM – High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F665-5QT)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil: 5 Quart (Part No.15980E)

Valvoline – Advanced Full Synthetic 10W-30 Motor Oil: Maximizes Engine Life, 1 Quart (Part No.VV935)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 1 Quart (Part No.VV180)

Castrol – EDGE® Euro Car 5W-30 A3/B4 Full Synthetic Motor Oil 1 Quart (Part No.15484E)

Castrol – EDGE® 10W-30 Full Synthetic Motor Oil 1 Quart (Part No.152E4E)

Valvoline – Full Synthetic High Mileage with MaxLife Technology 10W-30 Engine Oil: Maximizes Engine Life, 5 Quart (Part No.813532)

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

FRAM – Full Synthetic 5W-30 Dexos1 Gen 3 Engine Oil: 5 Quart (Part No.F930-5QT)

Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil: 1 Quart (Part No.152C3C)

Castrol – GTX 10W-30 Conventional Motor Oil: 1 Quart (Part No.15B400)

FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)

Castrol – EDGE High Mileage 5W-30 Full Synthetic Engine Oil 1 Quart (Part No.15979F)

FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)

Castrol – GTX Ultraclean Synthetic Blend 5W-30 Motor Oil: No Oil Keeps Engines Cleaner, 1 Quart (Part No.15A66C)

FRAM – Full Synthetic 5W-30 dexos 1 Gen 3 Motor Oil: 1 Quart (Part No.F930)

Castrol – EDGE® 10W-30 Full Synthetic Motor Oil 5 Quart (Part No.1598B6)

Castrol – GTX Ultraclean 5W-30 Synthetic Blend Motor Oil: 5 Quart (Part No.15A66D)

FRAM – Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control – 1 Qt (Part No.F620)

Castrol – GTX High Mileage Synthetic Blend 5W-30 Engine Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6A)

Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Engine Oil 1 Quart (Part No.154BC4)

Castrol – GTX High Mileage Synthetic Blend 10W-30 Motor Oil: Helps Protect Emission Systems, 1 Quart (Part No.149D6C)

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

Popular 1993 Plymouth Grand Voyager Motor Oil Categories

1993 Plymouth Grand Voyager Motor Oil

Motor Oil Brands To Make Your 1993 Plymouth Grand Voyager Last

Popular Valvoline Motor Oil

Top 1993 Plymouth Grand Voyager Motor Oil from Castrol

FAQs for 1993 Plymouth Grand Voyager Motor Oil

What are the most purchased Motor Oil for the 1993 Plymouth Grand Voyager?

What are the top-rated 1993 Plymouth Grand Voyager Motor Oil?

More Popular Parts for All Makes