1993 Nissan Pathfinder Fuel and Emissions Systems
More 1993 Nissan Pathfinder Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1993 Nissan Pathfinder, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1993 Nissan Pathfinder Fuel and Emissions Systems
Carquest Premium – Fuel Cap: 10838, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10838)
from
$17.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Dorman – Fuel Sender Lock Rin (Part No.E2029751095DOR)
from
$21.22
Fuel Sender Lock Rin
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0886)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest – Fuel Injector (Part No.63825)
from
$112.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
- Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1104)
from
$4.69
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA1754)
from
$20.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61514)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Nippon Reinz – Fuel Inject Cushion Ring (Part No.C101145504NRZ)
from
$4.42
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Modulator (Part No.EGC2607)
from
$155.99
Exhaust Gas Recirculation (EGR) Vacuum Modulator
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Pump Tank Seal (Part No.TS8027)
from
$5.99
Innovative engineering, manufacturing technology and quality control ensure that CARQUEST fuel pump seals meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Designed to OE fit, form and function
- Application specific design ensure a perfect fit guarantee
- OEM design ensures corrosion resistance and prevents leakage
- Manufactured with high quality material, ensuring the durability of this part to prevent costly leaks
- Rigorous ISO quality control process
Nippon Reinz – Fuel Injector O-Ring (Part No.C101267250NRZ)
from
$1.70
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Nippon Reinz – Fuel Inject Cushion Ring (Part No.C1011326681NRZ)
from
$3.50
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Nippon Reinz – Fuel Inject Cushion Ring (Part No.C1011111577NRZ)
from
$3.93
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11188-01)
from
$22.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10012-01)
from
$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Delphi – Fuel Injection Pressure Regulator (Part No.FP10406)
from
$132.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1298)
from
$34.49
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Ishino – Fuel Rail Insulator (Part No.C1008251685ISH)
from
$1.83
Fuel Rail Insulator
Hitachi – Mass Air Sensor (Part No.B3150396173HIT)
from
$416.47
Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Platinum coated sensing element
- Meets or exceeds OEM specifications
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
Delphi – Mass Air Flow Sensor (Part No.AF10450)
from
$477.99
Mass Air Flow Sensor
Product Features:
See More
Product Features:
- Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
- Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
- Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
- All parts are calibrated and tested to match the OE part
- Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
- Delphi OE technology validated to match the vehicle applications
Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0123)
from
$163.99
Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for air flow sensors
- 100% NEW, never remanufactured
- Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
- Precision manufactured and assembled sensing elements for accurate air flow measurements
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA2145)
from
$307.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA2142)
from
$120.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 1993 Nissan Pathfinder Fuel and Emissions Systems Categories
1993 Nissan Pathfinder Fuel and Emissions Systems
You count on your 1993 Nissan Pathfinder to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 45 Fuel and Emissions Systems ranging in price from $1.33 to $288.99, you’re sure to find everything you need for your 1993 Nissan Pathfinder.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 14 different brands like Carquest Premium, Motorad, and Delphi. 1993 Nissan Pathfinder Fuel and Emissions Systems start as low as $1.33!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 824 extensive product reviews on 1993 Nissan Pathfinder Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1993 Nissan Pathfinder below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1993 Nissan Pathfinder
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Nissan Pathfinder running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Delphi, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Injectors. All are waiting to get your 1993 Nissan Pathfinder back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1993 Nissan Pathfinder, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1993 Nissan Pathfinder Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1993 Nissan Pathfinder?
Out of 45 Fuel and Emissions Systems for the 1993 Nissan Pathfinder, the most popular in our inventory are:
from
$23.99
This product is not rated
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack
Gas Caps
What are the top-rated 1993 Nissan Pathfinder Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1993 Nissan Pathfinder based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
from
$24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
from
$16.79
(25)
Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Will buy again”
