1993 Mercedes-Benz 500SEL Steering and Chassis Parts

Essential Steering and Chassis Parts for 1993 Mercedes-Benz 500SELs

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102064399FEB)

Drive Shaft Flex Joint (Guibo)

from

$212.20
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

Rare Parts – Sway Bar Link (Part No.RP17925)

Sway Bar Link

from

$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

APA/URO Parts – Sway Bar Bushing (Part No.L105075598APA)

Sway Bar Bushing

from

$6.35
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

National – Multi Purpose Seal (Part No.710196)

Multi Purpose Seal

from

$29.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Stabilus – STAB-O-SHOC Steering Damper (Part No.M400036225STB)

STAB-O-SHOC Steering Damper

from

$82.03
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:
  • Damping forces up to 3000 N in tension and compression direction
  • Damping forces can be set independently of each other in both directions at the factory
  • Non-pressurized, no extension force
  • Positive, direct instant damping
See More

Dorman – Steering Tie Rod End (Part No.532-179)

Steering Tie Rod End

from

$35.99
This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.

Product Features:
  • Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications.
  • Durably designed – factory-sealed and precision-forged housing resists future corrosion.
  • Reliably engineered – built to decrease wear rate and ensure overall strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

First Equipment Quality – Thrust Arm (Part No.L2014242042FEQ)

Thrust Arm

from

$25.55
The FEQ Thrust Arm is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Bushings resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

TRW – Control Arm Strut (Part No.L2012302038TRW)

Control Arm Strut

from

$50.70
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW manufactures control arm struts for original equipment and service needs. TRW continues to develop next-generation control arm strut designs to reduce cost and weight, while maintaining or enhancing performance.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
See More

Karlyn – Karlyn Tie Rod Assembly (Part No.M300016607KAR)

Karlyn Tie Rod Assembly

from

$46.90
Karlyn tie rod assemblies meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Karlyn tie rod assemblies are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

International Suspension Group – Tie Rod End (Part No.M301070180ISG)

Tie Rod End

from

$27.15
Tie Rod End

Karlyn – Sway Bar Link (Part No.L103064845KAR)

Sway Bar Link

from

$24.32
The Karlyn Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Lemfoerder – Sway Bar Link (Part No.L103064845LEM)

Sway Bar Link

from

$35.74
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5317)

Remanufactured Power Steering Pump

from

$234.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010106166MAV)

Power Steering Pump, Remanufactured

from

$769.09
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

Maval – Steering Gear Box, Remanufactured (Part No.M1050121064MAV)

Steering Gear Box, Remanufactured

from

$672.68
Since it’s inception Maval has consistently delivered remanufactured products to customers who demand the highest quality and value.

Product Features:
  • 100% functional testing on all products produced.
  • Computerized tests insure that all products meet the O.E. Performance specification.
  • Performance and quality approvals from O.E. steering gear and pump manufacturers world wide.
  • Lifetime warranty on all remanufactured products.
See More

Cardone – Remanufactured Steering Gear (Part No.27-8603)

Remanufactured Steering Gear

from

$628.99
The steering gear box is the heart of the vehicle¿s steering system. It guides the wheels¿ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:
  • 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
  • 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
  • All critical components are tested to ensure product reliability.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
  • Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

International Suspension Group – Idler Arm Repair Kit (Part No.M303027108ISG)

Idler Arm Repair Kit

from

$41.47
Idler Arm Repair Kit

Febi – Idler Arm Repair Kit (Part No.M3030949727FEB)

Idler Arm Repair Kit

from

$52.79
The Febi Idler Arm Repair Kit restores the idler arm reducing front-end vibration, shimmy and unsafe handling. The Febi idler arm Repair Kit is manufactured to OE tolerances for a proper fit and function.

Product Features:
  • Improves steering response
  • Repairs worn components
  • Reduces vibration
  • Reduces tire wear
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202027021LEM)

OE Replacement Ball Joint

from

$89.55
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

TRW – Ball Joint (Part No.L202015491TRW)

Ball Joint

from

$48.90
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11613)

Conrol Arm W/Bj

from

$103.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Dorman – Suspension Control Arm (Part No.522-108)

Suspension Control Arm

from

$33.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

International Suspension Group – Tie Rod Bushing (Part No.M300276578ISG)

Tie Rod Bushing

from

$6.90
Tie Rod Bushing

Febi – Power Steering Pump Repair Kit (Part No.M204070020FEB)

Power Steering Pump Repair Kit

from

$35.96
Power Steering Pump Repair Kit

Upgrade your 1993 Mercedes-Benz 500SEL with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1993 Mercedes-Benz 500SEL, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 500SEL functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Steering and Chassis Parts for the 1993 Mercedes-Benz 500SEL, designed to meet your needs without breaking the bank. From Gear Box replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1993 Mercedes-Benz 500SEL at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $5.68 to $672.68, with an average price of $96.94. Our 41 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 1993 Mercedes-Benz 500SEL without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Mercedes-Benz 500SEL, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 65 customer reviews and counting, our 1993 Mercedes-Benz 500SEL Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Mercedes-Benz 500SEL is always ready to roll. We’re committed to providing you with everything you need to keep your 500SEL in top shape, all in one place. Start shopping confidently below for your 1993 Mercedes-Benz 500SEL!

Best-Selling Gear Boxes for 1993 Mercedes-Benz 500SELs

Enhance the driving experience in your Mercedes-Benz with 4 quality Gear Box components, starting at $82.03.

Maval – Steering Gear Box, Remanufactured (Part No.M1050121064MAV)

Steering Gear Box, Remanufactured

from

$672.68
Since it’s inception Maval has consistently delivered remanufactured products to customers who demand the highest quality and value.

Product Features:
  • 100% functional testing on all products produced.
  • Computerized tests insure that all products meet the O.E. Performance specification.
  • Performance and quality approvals from O.E. steering gear and pump manufacturers world wide.
  • Lifetime warranty on all remanufactured products.
See More

Cardone – Remanufactured Steering Gear (Part No.27-8603)

Remanufactured Steering Gear

from

$628.99
The steering gear box is the heart of the vehicle¿s steering system. It guides the wheels¿ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:
  • 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
  • 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
  • All critical components are tested to ensure product reliability.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
  • Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Remanufactured Steering Gear (Part No.27-8601)

Remanufactured Steering Gear

from

$607.99
The steering gear box is the heart of the vehicle¿s steering system. It guides the wheels¿ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:
  • 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
  • 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
  • All critical components are tested to ensure product reliability.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
  • Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Stabilus – STAB-O-SHOC Steering Damper (Part No.M400036225STB)

STAB-O-SHOC Steering Damper

from

$82.03
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:
  • Damping forces up to 3000 N in tension and compression direction
  • Damping forces can be set independently of each other in both directions at the factory
  • Non-pressurized, no extension force
  • Positive, direct instant damping
See More

Most Popular 1993 Mercedes-Benz 500SEL Power Steering Parts

Customize your Mercedes-Benz with 11 Power Steering Parts products like Power Steering Pumps, Power Steering Filters, and Power Steering Pump Kits, all priced under $234.99.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-5317)

Remanufactured Power Steering Pump

from

$234.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Febi – Power Steering Pump Repair Kit (Part No.M204070020FEB)

Power Steering Pump Repair Kit

from

$35.96
Power Steering Pump Repair Kit

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Top Picks for 1993 Mercedes-Benz 500SEL Ball Joints

Upgrade Mercedes-Benz 500SELs with top-quality Ball Joints parts, including 7 OEM and aftermarket selections for your 1993 model.

First Equipment Quality – Thrust Arm (Part No.L2014242042FEQ)

Thrust Arm

from

$25.55
The FEQ Thrust Arm is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Bushings resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Dorman – Suspension Control Arm (Part No.520-912)

Suspension Control Arm

from

$91.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.520-911)

Suspension Control Arm

from

$91.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Autopart International Inc – Control Arm (Part No.L20001987296API)

Control Arm

from

$122.98
Control Arm

Rare Parts – Conrol Arm W/Bj (Part No.RP11613)

Conrol Arm W/Bj

from

$103.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202027021LEM)

OE Replacement Ball Joint

from

$89.55
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Dorman – Suspension Control Arm (Part No.522-108)

Suspension Control Arm

from

$33.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

In-Demand Sway Bars for 1993 Mercedes-Benz 500SELs

Select from 9 premium Sway Bars parts for your 1993 Mercedes-Benz 500SEL, with prices ranging from $5.68 to $54.99.

Lemfoerder – Sway Bar Link (Part No.L103064845LEM)

Sway Bar Link

from

$35.74
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rare Parts – Sway Bar Link (Part No.RP17925)

Sway Bar Link

from

$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Link (Part No.RP19676)

Sway Bar Link

from

$42.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Lemfoerder – Sway Bar Link (Part No.L103064846LEM)

Sway Bar Link

from

$35.82
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Autopart International Inc – Sway Bar Link (Part No.L10302063972API)

Sway Bar Link

from

$28.31
Sway Bar Link

Autopart International Inc – Sway Bar Link (Part No.L10302047993API)

Sway Bar Link

from

$28.31
Sway Bar Link

Karlyn – Sway Bar Link (Part No.L103064845KAR)

Sway Bar Link

from

$24.32
The Karlyn Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

APA/URO Parts – Sway Bar Bushing (Part No.L105075598APA)

Sway Bar Bushing

from

$6.35
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Febi – Sway Bar Bushing (Part No.L105075597FEB)

Sway Bar Bushing

from

$5.68
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Most Sold 1993 Mercedes-Benz 500SEL Tie Rods

Explore our best-selling Mercedes-Benz parts for the 1993 500SEL among 6 OEM and aftermarket options starting from $6.90.

International Suspension Group – Tie Rod Bushing (Part No.M300276578ISG)

Tie Rod Bushing

from

$6.90
Tie Rod Bushing

International Suspension Group – Tie Rod End (Part No.M301070180ISG)

Tie Rod End

from

$27.15
Tie Rod End

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300030699LEM)

Lemfoerder Tie Rod Assembly

from

$110.16
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Febi – FEBI Tie Rod End (Part No.M301070181FEB)

FEBI Tie Rod End

from

$40.66
FEBI Tie rod ends strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod ends ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:
  • Original Equipment Manufacturer
  • Larger diameter to increase the load carrying capacity
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Autopart International Inc – Tie Rod End (Part No.M30101955039API)

Tie Rod End

from

$38.48
Tie Rod End

Dorman – Steering Tie Rod End (Part No.532-179)

Steering Tie Rod End

from

$35.99
This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.

Product Features:
  • Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications.
  • Durably designed – factory-sealed and precision-forged housing resists future corrosion.
  • Reliably engineered – built to decrease wear rate and ensure overall strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Top-Rated Steering and Chassis Parts Brands For Your 1993 Mercedes-Benz 500SEL

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1993 Mercedes-Benz 500SELs. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, and more. Steering and Chassis Parts from these brands that fit a 1993 500SEL start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 1993 Mercedes-Benz 500SEL Steering and Chassis Parts

When it comes to maintaining or upgrading your 1993 Mercedes-Benz 500SEL, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 1993 Mercedes-Benz 500SEL. With over 7 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $233.06. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Remanufactured Steering Gear
from
$628.99
This product is not rated

Remanufactured Steering Gear

“”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Remanufactured Steering Gear
from
$607.99
This product is not rated

Remanufactured Steering Gear

“”

FAQs for 1993 Mercedes-Benz 500SEL Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1993 Mercedes-Benz 500SELs?

Out of 41 Steering and Chassis Parts that fit 1993 Mercedes-Benz 500SELs, the following parts are the top sellers:

What’s the price range for 1993 Mercedes-Benz 500SEL Steering and Chassis Parts?

Steering and Chassis Part prices for the 1993 Mercedes-Benz 500SEL start at $5.68 and go up to $672.68 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1993 Mercedes-Benz 500SEL?

The average price for Steering and Chassis Parts for the 1993 Mercedes-Benz 500SEL is $96.94. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mercedes-Benz 500SEL model years?

Yes, we currently carry Steering and Chassis Parts for 3 model years of Mercedes-Benz 500SELs between 1984 and 1992. Steering and Chassis Parts are bought most frequently for the following model years: 1992, 1985, and 1984.

What are the cheapest Steering and Chassis Parts for my 1993 Mercedes-Benz 500SEL?

The cheapest 1993 Mercedes-Benz 500SEL Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1993 Mercedes-Benz 500SEL?

Out of 65 reviews by customers, our 1993 Mercedes-Benz 500SEL Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1993 Mercedes-Benz 500SEL and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1993 Mercedes-Benz 500SEL?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1993 Mercedes-Benz 500SEL:

Can I get help with 1993 Mercedes-Benz 500SEL Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Steering and Chassis Parts and more.

What is your return policy for Mercedes-Benz 500SEL Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 500SEL Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.