1993 Hyundai Sonata Brake Master Cylinders
More 1993 Hyundai Sonata Brake Master Cylinders
Find your specific 1993 Hyundai Sonata original or aftermarket Brake Master Cylinders below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1993 Hyundai Sonata Brake Master Cylinders
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (Part No.MCA630456)
from
$126.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
MANDO – New Brake Master Cylinder Original Equipment (Part No.17A1080)
from
$555.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Brake parts with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3018)
from
$75.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3302)
from
$128.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
MANDO – New Brake Master Cylinder Original Equipment (Part No.17A1134)
from
$117.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Brake parts with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Mando – Brake Master Cylinde (Part No.N3000225514MND)
from
$220.19
Brake Master Cylinde
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3299)
from
$40.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
MANDO – New Brake Master Cylinder Original Equipment (Part No.17A1137)
from
$90.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Brake parts with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Wearever – Master Cylinder (Part No.11-2770)
from
$71.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.875" Bore (Part No.MCA630848)
from
$125.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
Wearever – Master Cylinder (Part No.10-2575)
from
$59.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Master Cylinder (Part No.11-2750)
from
$70.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Wearever – Remanufactured Brake Master Cylinder (Part No.11-3258)
from
$163.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
Carquest Wearever – New Brake Master Cylinder (Part No.MCA630191)
from
$56.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
Product Features:
See More
Product Features:
- All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
- Key components like spring are from high and stable quality suppliers.
- Products are machined by CNC machines with strictly quality control.
- Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
- Direct replacement for a proper fit
- Manufactured to strict engineering quality standards, meets S.A.E. specifications
- Each product is 100% tested on production lines and sampling tested prior to shipment
- Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
- Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
MANDO – OE Brake Master Cylinder w/ Reservoir (Part No.17A1071)
from
$99.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Brake parts with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (Part No.MCA630192)
from
$153.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.
Product Features:
See More
Product Features:
- Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
- Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
- 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
- Strict specifications – made to meet rigorous SAE International standards
MANDO – New Brake Master Cylinder Original Equipment (Part No.17A1133)
from
$111.99
HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of Brake parts with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!
Product Features:
See More
Product Features:
- Direct Original Equipment Replacement
- Tested for Quality, Durability, and Reliability
- Manufactured in Korea
Popular 1993 Hyundai Sonata Brake Master Cylinders Categories
1993 Hyundai Sonata Brake Master Cylinders
Maybe you’re in the middle of a full rebuild of that 1993 Hyundai Sonata. Maybe you just need a couple of Brake Master Cylinders. Either way, Advance Auto Parts has 4 different Brake Master Cylinders in our inventory ranging from $15.99 to $220.19. That means you can find the exact parts or products you need to keep that 1993 Hyundai Sonata running smoothly.
Brake Master Cylinders are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Hyundai Sonata. Cardone, Mando, and Wearever are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Master Cylinders for your 1993 Hyundai Sonata, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Master Cylinders to keep your 1993 Hyundai Sonata rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Master Cylinders Brands To Make Your 1993 Hyundai Sonata Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Hyundai Sonata demands trusted brand parts and products to keep it running. Many trusted brands of Brake Master Cylinders make up Advance Auto Parts’ inventory, and all are ready to help make your Sonata the best it can be. Be sure to browse some of our top Brake Master Cylinders brands and parts.
Popular Cardone Brake Master Cylinders
We carry Cardone parts in our stock across Brake Master Cylinder Bleeders categories, plus more. For a 1993 Hyundai Sonata, our most popular Cardone Brake Master Cylinders include:
FAQs for 1993 Hyundai Sonata Brake Master Cylinders
What are the most purchased Brake Master Cylinders for the 1993 Hyundai Sonata?
Out of 4 Brake Master Cylinders for the 1993 Hyundai Sonata, the most popular in our inventory are:
