1993 GMC S15 Jimmy Transmission Parts

Below you will find various in-demand GMC Transmission Parts, components and accessories for your 1993 S15 Jimmy. Advance Auto Parts has popular S15 Jimmy parts like Transmission Seals, Transmission Mounts, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other S15 Jimmy model years including 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994 and more. Select a category of 1993 GMC S15 Jimmy Transmission Parts below and start saving instantly.

Popular 1993 GMC S15 Jimmy Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Gear Shift Rod Bushings

Transmission Solenoids

Transmission Oil Cooler Lines

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Detent Cables

Automatic Transmission Oil Pump Seals

Pinion Seals

Neutral Safety Switch Connectors

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Automatic Transmission Extension Housing Seal Kits

Torque Converter Seals

Extension Housing Seals

Manual Transmission Output Shaft Seals

Automatic Transmission Torque Converter Clutch Valve Solenoid Connectors

Transmission Shift Kits

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Automatic Transmission Detent Cable Seals

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Oil Pump O-Rings

Remanufactured Automatic Transmissions

Torque Converter Bearings

Manual Transmission Output Shaft Seal Kits

Manual Transmission Countershaft Bearing Set

Essential Transmission Parts for 1993 GMC S15 Jimmies

from

$35.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 6

from

$4.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$88.99

AT CONTR SOLENOID

from

$10.99

AT OIL PUMP GASKET

from

$31.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$137.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$28.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
Chevy 90░ V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
0.68″ Underhead Length
200,000 PSI

from

$130.99

B&M Deep Transmission Pans increase the fluid capacity of your transmission, improving the cooling, allowing your transmission to work as efficiently as possible. Included drain plug, eliminates the need to drop the pan to drain the fluid.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Chrome Plated Steel

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$849.99

Converter: 4L60E 24-2800 Stall

from

$2000.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). [Torque Converter] All of converters are dynamic balanced All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$207.99

AT BANNER KIT

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

We offer a line of Auto Trans Shift Lever Control Rod Bushings for a range of applications. All our Auto Trans Shift Lever Control Rod Bushings are made of quality materials for a long service life.

Product Features:

Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
Conveniently fix- simple solution to address worn bushings and restore original performance and feel
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$8.99

AT OIL PUMP ORING

from

$25.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$73.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Oil Pressure Sensor/Switch monitors the engine¿s oil pressure, providing critical feedback to the driver and engine control unit to prevent potential damage from low oil pressure conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$256.99

AT MSTR REP KIT PLUS

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$33.99

AUTO TRANS BAND

from

$10.99

This brake pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Upgrade your 1993 GMC S15 Jimmy with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1993 GMC S15 Jimmy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Transmission Parts are key to keeping your S15 Jimmy functioning at its best. At Advance Auto Parts, we offer a wide selection of 133 Transmission Parts for the 1993 GMC S15 Jimmy, designed to meet your needs without breaking the bank. From Transmission Seal replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1993 GMC S15 Jimmy at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $2,159.00, with an average price of $299.05. Our 133 Transmission Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 1993 GMC S15 Jimmy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 GMC S15 Jimmy, we stock popular OEM and aftermarket Transmission Parts from top names like National, Imperial, Pro-King, and more. National Transmission Parts start at just $12.99 and boast an impressive 4.3 stars average rating from customers. Imperial and Pro-King also bring quality to the table, with Transmission Parts available starting at $34.99, and at an average 4.1 stars rating. With 900 customer reviews and counting, our 1993 GMC S15 Jimmy Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 GMC S15 Jimmy is always ready to roll. We’re committed to providing you with everything you need to keep your S15 Jimmy in top shape, all in one place. Start shopping confidently below for your 1993 GMC S15 Jimmy!

Best-Selling Transmission Seals for 1993 GMC S15 Jimmies

Enhance the driving experience in your GMC with 22 quality Transmission Seal components, starting at $3.99.

show more show less

from

$16.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$8.99

AT SEL SHAFT SEAL

from

$3.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$19.99

AT OIL PUMP SEAL

from

$30.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$5.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$20.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

AT DETENT CABLE SEAL

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.29

AT EXT HOUSING SEAL

from

$8.99

AT EXT HOUSING SEAL

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.49

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Product Features:

Brand may vary by location

from

$7.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Popular 1993 GMC S15 Jimmy Transmission Mounts

Customize your GMC with 5 Transmission Mounts products like Transmission Mounts, all priced under $97.99.

show more show less

from

$6.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 77-82; CHEV 78-05; GMC 81-99; OLDS 78-83; PONT 75-93;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1975-2005
Weight approx: 1 Lbs
HEIGHT: 1.95 INCH / 49.53 MM WITHOUT STUD
STUD AND BOLT HOLES INLINE
STUD: M10-1.50
MOUNT HOLES: 3.75 INCH / 95.25 MM

from

$44.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

from

$90.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$97.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

Top Picks for 1993 GMC S15 Jimmy Automatic Transmission Parts

Upgrade GMC S15 Jimmies with top-quality Automatic Transmission Parts parts, including 26 OEM and aftermarket selections for your 1993 model.

show more show less

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

Quick Link Splice Connectors

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$10.99

Direct replacement – this brake pedal bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$66.99

AT CONTR SOLENOID

from

$8.99

AT OIL PUMP ORING

from

$133.99

ATHARNESS VSS REPR

from

$33.99

AUTO TRANS BAND

from

$11.99

AT FRT PUMP BUSHING

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$88.99

AT CONTR SOLENOID

from

$48.99

AT/HARNESS VSS REPR

from

$2159.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2158.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2000.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1995.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1995.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1914.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1914.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1914.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1888.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1719.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$1719.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.

from

$1719.99

Product might not be available in all states due to local laws.

In-Demand Transmission Bearings for 1993 GMC S15 Jimmies

Select from 8 premium Transmission Bearings parts for your 1993 GMC S15 Jimmy, with prices ranging from $8.79 to $17.99.

show more show less

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Product Features:

Brand may vary by location

from

$13.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.49

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Sold 1993 GMC S15 Jimmy Transmission Cooler and Parts

Explore our best-selling GMC parts for the 1993 S15 Jimmy among 10 OEM and aftermarket options starting from $25.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

Top-Rated Transmission Parts Brands For Your 1993 GMC S15 Jimmy

Shop for the best-rated brands offering Transmission Parts and other products for your 1993 GMC S15 Jimmies. Below you’ll find some of our best rated Transmission Parts from National, Imperial, and Pro-King, and more. Transmission Parts from these brands that fit a 1993 S15 Jimmy start at just $12.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1993 GMC S15 Jimmy Transmission Parts

When it comes to maintaining or upgrading your 1993 GMC S15 Jimmy, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1993 GMC S15 Jimmy. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $15.66. Plus, with over 42 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.99

(25)

Multi-Purpose Bearing

“Smooth”

from $16.99

(4)

Multi-Purpose Seal

“great item”

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

Popular Imperial 1993 GMC S15 Jimmy Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 1993 GMC S15 Jimmy owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1993 S15 Jimmy, Advance Auto Parts carries a full inventory of 3 Imperial Transmission Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Imperial Transmission Parts range from $61.99 to $85.99, plus, with more than 14 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

from $61.99

(3)

Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11"

“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”

from $73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

FAQs for 1993 GMC S15 Jimmy Transmission Parts

Which Transmission Parts are best-sellers for 1993 GMC S15 Jimmies?

Out of 133 Transmission Parts that fit 1993 GMC S15 Jimmies, the following parts are the top sellers:

Taper Bearing Set (5050537) – $10.99
High Performance Transmission Oil Cooler (3670013) – $83.99
Taper Bearing Set (5050626) – $12.99

What’s the price range for 1993 GMC S15 Jimmy Transmission Parts?

Transmission Part prices for the 1993 GMC S15 Jimmy start at $3.99 and go up to $2,159.00 for the most premium parts.

What’s the average price of a Transmission Part for a 1993 GMC S15 Jimmy?

The average price for Transmission Parts for the 1993 GMC S15 Jimmy is $299.05. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other GMC S15 Jimmy model years?

Yes, we currently carry Transmission Parts for 10 model years of GMC S15 Jimmies between 1983 and 1994. Transmission Parts are bought most frequently for the following model years: 1994, 1992, 1991, 1990, 1989, 1988, 1987, 1986, and 1985.

What are the cheapest Transmission Parts for my 1993 GMC S15 Jimmy?

The cheapest 1993 GMC S15 Jimmy Transmission Parts we carry in stock are:

Oil Seal (5440149) – $3.99
Differential Pinion Seal (10751056) – $3.99
AT DETENT CABLE SEAL (10861026) – $3.99
Oil Seal (15440117) – $4.99
Oil Seal (5440025) – $5.99

What are the top-rated Transmission Parts that fit the 1993 GMC S15 Jimmy?

Out of 900 reviews by customers, our 1993 GMC S15 Jimmy Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1993 GMC S15 Jimmy and their top-rated products:

Transmission Cooler and Parts
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
Automatic Transmission Pan and Gaskets
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99

What types of Transmission Parts do you sell for my 1993 GMC S15 Jimmy?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1993 GMC S15 Jimmy:

Can I get help with 1993 GMC S15 Jimmy Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Transmission Parts and more.

What is your return policy for GMC S15 Jimmy Transmission Parts?

Advance Auto Parts keeps returns simple. For new GMC S15 Jimmy Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1993 GMC S15 Jimmy Transmission Parts

ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)

Driveworks – Oil Seal (Part No.S-4950)

Carquest – Multi-Purpose Relay (Part No.83A1011)

ATP – AT CONTR SOLENOID (Part No.JE-53)

ATP – AT OIL PUMP GASKET (Part No.SG-40)

Carquest Premium – Multi-Use Connector (Part No.PTA1078)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARN1369)

Driveworks – Oil Seal (Part No.S-8610)

ARP Auto Racing – For Use With 90 Degree V6 Chevy/ 265 And 454 V8 With 2 Piece Rear Seal (Part No.200-2902)

B & M – Chrome TH700R4 Transmission Deep Pan (Part No.70289)

National – Multi-Purpose Seal (Part No.5200)

Hays – Converter: 4L60E 24-2800 Stall (Part No.97-1G24Q)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L60E4393B4)

ATP – AT BANNER KIT (Part No.CM-26)

National – Multi-Purpose Seal (Part No.9449)

Dorman – Help – Shifter Link Bushing (Part No.02373)

ATP – AT OIL PUMP ORING (Part No.SO-21)

GM Genuine Parts – Multi-Purpose Pigtail Kit (Part No.PT3786)

Carquest Premium – Automatic Transmission Oil Pressure Switch (Part No.MAC1001)

National – Multi-Purpose Bearing (Part No.A-18)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

ATP – AT MSTR REP KIT PLUS (Part No.CMS-20)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

ATP – AUTO TRANS BAND (Part No.CX-42)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

GM Genuine Parts – 4-Way Male Black Multi-Purpose Pigtail (Part No.PT127)

FAG US – Shaft Seal (Part No.SS2114)

National – Multi-Purpose Seal (Part No.4934)

National – Multi-Purpose Seal (Part No.4583)

National – Multi-Purpose Seal (Part No.9449)

National – Multi-Purpose Seal (Part No.5200)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Motive Gear – Differential Pinion Seal (Part No.2043)

National – Multi-Purpose Seal (Part No.4528N)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

National – Shaft Repair Sleeve (Part No.99138)

National – Multi-Purpose Seal (Part No.9613S)

National – Multi Purpose Seal (Part No.8792S)

National – Multi-Purpose Seal (Part No.8610)

Driveworks – Oil Seal (Part No.S-8610)

National – Multi-Purpose Seal (Part No.5208)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

National – Multi-Purpose Seal (Part No.710597)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

National – Manual Transmission Output Shaft Seal (Part No.4532N)

National – Multi-Purpose Seal (Part No.4530)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-4528-N)

FAG US – Shaft Seal (Part No.SS2114)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2392)

Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

Energy Suspension – Transmission Mount (Part No.3.1129R)

Energy Suspension – Transmission Mount (Part No.3.1132G)

Pro-King – Automatic Transmission Solenoid (Part No.52-0214)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

Dorman – Help – Brake and Clutch Bushings (Part No.74016)

ATP – AT CONTR SOLENOID (Part No.JE-8)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – ATHARNESS VSS REPR (Part No.CE-8)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

ATP – AT CONTR SOLENOID (Part No.JE-53)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Spartan – Automatic Transmission Assembly; GM RWD 4L60E 4-Spd (Part No.1252A-HP)

Spartan – Automatic Transmission Assembly; GM AWD 4L60E 4-Spd (Part No.1253-HP)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L60E4393B4)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L60E4393B2)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T4L60E5793T4)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260105)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260101)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260104)

Spartan – Automatic Transmission Assembly; GM RWD 4L60E 4-Spd (Part No.1252B-HP)

Moveras – 4L60E – Automatic Transmission (Part No.M00384)

Moveras – 4L60E – Automatic Transmission (Part No.M00384BA)

Moveras – 4L60E – Automatic Transmission (Part No.M00933)