1993 Ford FT900 Car Parts & Accessories

Our brand-new wiper motors are designed to match O.E. fitment and performance at a fraction of the cost. Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life. Load testing guarantees reliable performance you can trust.

Product Features:

• Load testing ensures reliable performance.
• Brushes are precisely designed to ensure armature and contacts are properly matched.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage.
• Magnets deliver the right amount of torque needed to withstand extreme weather conditions and to compensate for other worn components in the wiper motor transmission linkage.

Using advanced re-engineering materials and processes, our remanufactured wiper motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100 percent reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

• Each unit has its main components tested or gauged against the O.E. standard. (Armature, Field, Bearing, Parking switch, or pulse board) – Then the final product is tested for each of its functions on the vehicle.
• Every motor bearing is re-impregnated or replaced as needed.
• Lubrication is applied to the output gear to provide maximum load capacity and long life.
• Weak solder points are 100 percent reflowed to extend life expectancy.
• Motor magnets are 100 percent recharged for performance and reliability.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

TRICO ExactFit Conventional wiper blades are easy to install and designed to match OE specifications and standards. These wiper blades live up to their name because they feature a pre-attached adaptor specific to your vehicle for an exact fit and easy installation.

Product Features:

• Original factory quality for the same fit and function as when the vehicle was new
• Pre-assembled connector for quick and easy, one-step wiper replacement every time
• Durable metal frame for added strength

TRICO Ice is a rugged and durable winter wiper blade designed specifically to combat severe weather and still offer optimal performance. Flexible beam blade design coupled with synthetic-blended armor for an infinitely flexible blade that can see you through even the worst driving conditions.

Product Features:

• Ruggedly constructed armor seals blade structure from severe weather
• One-piece, flexible design snugly conforms to most windshields
• Robust, heavy-gauge wiper element resists tearing in sub-zero temperatures

Carquest XtraClear beam wiper blades are an all-weather design featuring enhanced beam blade engineered to perform over 1.5 million cycles. Our beam wiper blades feature SWIFT Easy Connection Technology for a quick and easy wiper replacement for most vehicles on the road today. The twin-point coupler delivers constant, even pressure across the entire windshield for excellent visibility. Carquest XtraClear beam wiper blades are a quiet, longer-lasting option for enhanced all-weather performance.

Product Features:

• Tested to perform over 1.5 million cycles ensures long-lasting performance.
• Beam wiper blade design delivers great visibility in all weather conditions
• SWIFT Easy Connection Technology offers quick and easy wiper replacement
• Infinite pressure points provide uniform contact across windshield
• Twin-point coupler delivers constant, even pressure across entire windshield for clear visibility
• Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9×3 Hook, 9×4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (17mm) & Side Pin (17mm)

Using advanced re-engineering materials and processes, our remanufactured wiper motors meet all O.E. standards of performance and fitment. Every motor bearing is re-impregnated or replaced, as necessary, and all motor magnets are recharged. Lubrication is applied to the output gear to provide maximum load capacity and weak solder points are 100 percent reflowed. Each unit undergoes function testing against O.E. standards to ensure reliable performance.

Product Features:

• Each unit has its main components tested or gauged against the O.E. standard. (Armature, Field, Bearing, Parking switch, or pulse board) – Then the final product is tested for each of its functions on the vehicle.
• Every motor bearing is re-impregnated or replaced as needed.
• Lubrication is applied to the output gear to provide maximum load capacity and long life.
• Weak solder points are 100 percent reflowed to extend life expectancy.
• Motor magnets are 100 percent recharged for performance and reliability.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

XtraClear conventional blades are engineered for better wrap on today’s highly curved windshields. An aerodynamic steel frame provides exceptional strength and durability, while the pre-attached universal adaptor makes installation quick and easy.

Product Features:

• Engineered for better wrap on curved windshields
• Pre-attached universal adaptor fits many vehicles
• All metal construction for strength and durability

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Windshield Wiper Switch enables drivers to control the speed and operation of the wipers, ensuring optimal visibility during adverse weather conditions and enhancing overall safety while driving. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Application engineered media which aids in stripping water in diesel fuels
• Patent pending drain, metal end caps, which hold media in place
• Rust resistant can, ensuring no leakage from inside
• Made in USA
• CAUTION: Furnished O-Ring must be installed on post for seal.

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Contains Standpipe
• Includes Standpipe
• CAUTION: Furnished O-Ring must be installed on post for seal.

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Includes Integral Post Seal

This high-volume accessory is designed to promote efficient fuel injection performance. FRAM offers exceptional domestic and import fuel filter coverage to meet the needs of virtually all engine configurations.

Product Features:

• Designed for use in modern fuel injection systems and with oxygenated fuels

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Carquest Premium Brake Calipers are remanufactured to meet or exceed OE specifications for performance and durability. Each cast iron caliper is finished with OE-style zinc-dichromate for superior rust protection. Application-specific brackets and abutment hardware (where required) to ensure an easier installation. New EPDM rubber seals and dust boots to resist heat and prevent leaks. Every unit is 100 percentage tested for pressure and fit, ensuring out-of-the-box reliability.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• Brackets included where required for complete system restoration
• OE-style zinc dichromate anti-corrosion coating provides superior rust resistance on all iron caliper bodies and brackets
• New, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• Stainless steel pad abutment hardware included when applicable

CARDONE New Vacuum Brake Boosters, Hydro-Vac Boosters, and Hydraulic Boosters are back by CARDONE Select Engineering (CSE). CARDONE Engineering (CSE) is based off 40 years of CARDONE engineering expertise, where original design weaknesses are identified, corrected and where applicable upgraded to provide a more durable part then the original unit. Every unit is 100 percent new and manufactured to meet or exceed OEM performance, providing a quality product both you and your vehicle rely on.

Product Features:

• A premium finish is applied on every unit for superior corrosion protection.
• Each unit is 100 percent vacuum and pressure tested to ensure reliable performance.
• Pedal rods are 100 percent functionally tested to ensure proper operation.
• Guaranteed fit and function.
• Meets or exceeds O.E.M. performance.
• Meets or exceeds O.E.M. performance.

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system