1993 Ford F53 Performance and Racing Products
Find Your Specific 1993 Ford F53 Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1993 F53. Advance Auto Parts has popular F53 parts like Performance Exhaust Products, Performance Ignition Products, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F53 model years including
1995,
1996,
1997,
2004,
2006,
2007,
2008,
2009,
2011 and more. Select a category of 1993 Ford F53 Performance and Racing Products below and start saving instantly.
Popular 1993 Ford F53 Performance and Racing Products Categories
Essential Performance and Racing Products for 1993 Ford F53s
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$40.49
Brake Bleeder Screws
MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)
from
$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Factory replacement coil
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1683)
from
$67.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Validated for fit, form, and function
- Application specific design to ensure a perfect fit and correct operation for Unsurpassed quality you can trust
- Engineered and manufactured specifically for the repair environment
- Every part for the repair procedure is Includes in the kit unless otherwise noted
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1018)
from
$53.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Performance Main Seal Set (Part No.2948)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$539.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$306.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$614.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$67.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
Mr. Gasket – Valve Cover (Part No.9413)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. 7-bolt design. Sold as a pair.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Sold as a pair
- Fits Ford big block (385 series)
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)
from
$67.99
All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.
Product Features:
See More
Product Features:
- Injection Molded From DuPont Rynite Material
- Extreme strength; high dielectric properties
- Designed with performance in mind
- High quality; voltage insulating material
- Brass terminals
- Black in color
Hooker Headers – Super Competition Header Gasket (Part No.10882HKR)
from
$26.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
Upgrade your 1993 Ford F53 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1993 Ford F53, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F53 functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Performance and Racing Products for the 1993 Ford F53, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1993 Ford F53 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $23.29 to $869.99, with
an average price of $204.30.
Our 28 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1993 Ford F53 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Ford F53, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, MSD Ignition, B & M, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $73.99, and at an average 4.2 stars rating.
With 45 customer reviews and counting, our 1993 Ford F53 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1993 Ford F53 is always ready to roll. We’re committed to providing you with everything you need to keep your F53 in top shape, all in one place.
Start shopping confidently below for your 1993 Ford F53!
Best-Selling Performance Exhaust Products for 1993 Ford F53s
Enhance the driving experience in your Ford with 2 quality Performance Exhaust Product components, starting at $26.49.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)
from
$60.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- For use with SVO square port cylinder heads
- Easy Removal For Disassembly
Hooker Headers – Super Competition Header Gasket (Part No.10882HKR)
from
$26.49
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Most Popular 1993 Ford F53 Performance Ignition Products
Customize your Ford with 5 Performance Ignition Products products
like Performance Coils,
Performance Ignition Parts, and
Performance Ignition Systems, all
priced under $614.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)
from
$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Factory replacement coil
Mallory – Distributor Wiring Harness (Part No.29349)
MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)
from
$614.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered.
- Powerful magnets are embedded in a billet aluminum trigger wheel.
- Incl. brackets/mounting hardware to fit a variety of engines
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1993 Ford F53 Performance Distributors
Upgrade Ford F53s with top-quality Performance Distributors parts, including 3 OEM and aftermarket selections for your 1993 model.
MSD Ignition – Distributor Cap; Ford HEI; Black (Part No.84083)
from
$67.99
All the quality and performance you’ve come to expect from MSD is now available in black. Our customers have requested black parts for their builds so we’ve answered with the addition of several black distributor caps and cap and rotor kits. The black parts are built to the exact specifications of the traditional MSD red components. If you’re looking to change up the look under the hood of your street machine, off-road rig or race car; check out the complete line of MSD black components.
Product Features:
See More
Product Features:
- Injection Molded From DuPont Rynite Material
- Extreme strength; high dielectric properties
- Designed with performance in mind
- High quality; voltage insulating material
- Brass terminals
- Black in color
MSD Ignition – Ford 351C-460 Performance Distributor with Vacuum Advance (Part No.8350)
from
$635.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Simple And Clean Installation w/Only Three Wires To Connect
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Polished steel shaft is guided by a sealed ball bearing
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$67.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
In-Demand Performance Engines for 1993 Ford F53s
Select from 9 premium Performance Engines parts for your 1993 Ford F53, with prices ranging from $23.29 to $529.99.
Mr. Gasket – Water Neck (Part No.2664)
from
$35.99
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with gasket and mounting bolts
- Chrome plated
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1018)
from
$53.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Performance Main Seal Set (Part No.2948)
from
$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Competition Cams – ENGINE ROCKER ARM (Part No.1630-16)
from
$529.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17045-16)
from
$301.99
ENGINE ROCKER ARM
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1683)
from
$67.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Validated for fit, form, and function
- Application specific design to ensure a perfect fit and correct operation for Unsurpassed quality you can trust
- Engineered and manufactured specifically for the repair environment
- Every part for the repair procedure is Includes in the kit unless otherwise noted
Competition Cams – ENGINE ROCKER ARM (Part No.1630-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.17045-1)
from
$29.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1411-1)
from
$23.29
ENGINE ROCKER ARM
Most Sold 1993 Ford F53 Performance Valve Covers
Explore our best-selling Ford parts for the 1993 F53 among 1 OEM and aftermarket options starting from $101.99.
Mr. Gasket – Valve Cover (Part No.9413)
from
$101.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. 7-bolt design. Sold as a pair.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Sold as a pair
- Fits Ford big block (385 series)
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Top-Rated Performance and Racing Products Brands For Your 1993 Ford F53
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1993 Ford F53s. Below you’ll find some of our best rated Performance and Racing Products from Mallory, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 1993 F53 start at just $73.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1993 Ford F53 Performance and Racing Products
When it comes to maintaining or upgrading your 1993 Ford F53, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1993 Ford F53. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular MSD Ignition 1993 Ford F53 Performance and Racing Products
MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1993 Ford F53 owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1993 F53, Advance Auto Parts carries a full inventory of 1 MSD Ignition Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range up to $73.99, plus, with more than 12 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$73.99
(12)
Coil; Street Fire; Ford TFI
“Replaced the original equipment coil in a 1989 town car with the msd coil. The car no longer misfires. It now idles smooth and never stalls.I would re”
FAQs for 1993 Ford F53 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1993 Ford F53s?
Out of 28 Performance and Racing Products that fit 1993 Ford F53s, the following parts are the top sellers:
- Coil; Street Fire; Ford TFI (6900028) – $73.99
- Automatic Shifter, Z-Gate (6900216) – $306.99
- Water Neck (22901143) – $35.99
What’s the price range for 1993 Ford F53 Performance and Racing Products?
Performance and Racing Product prices for the 1993 Ford F53 start at $23.29 and go up to $869.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1993 Ford F53?
The average price for Performance and Racing Products for the 1993 Ford F53 is $204.30. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford F53 model years?
What are the cheapest Performance and Racing Products for my 1993 Ford F53?
The cheapest 1993 Ford F53 Performance and Racing Products we carry in stock are:
- ENGINE ROCKER ARM (50272934) – $23.29
- Super Competition Header Gasket (22311382) – $26.49
- ENGINE ROCKER ARM (50272511) – $29.99
- Distributor Wiring Harness (17350080) – $34.49
- Water Neck (22901143) – $35.99
What are the top-rated Performance and Racing Products that fit the 1993 Ford F53?
Out of 45 reviews by customers, our 1993 Ford F53 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1993 Ford F53 and their top-rated products:
- Performance Shifters
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Z-Gate (6900216) – $306.99
- Performance Radiators
- Automatic Shifter, Sport Shifter (17130066) – $371.99
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Z-Gate (6900216) – $306.99
What types of Performance and Racing Products do you sell for my 1993 Ford F53?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1993 Ford F53:
Can I get help with 1993 Ford F53 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford F53 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford F53 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
