1993 Eagle Talon Exhaust Parts

Essential 1993 Eagle Talon Exhaust Parts

MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.49895)

OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$316.99
MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49895 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-2000 Chrysler Sebring, 1995-1999 Mitsubishi Eclipse, and more, this direct-fit catalytic converter also interchanges with OE parts MR239754 and MR239755, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23244)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$326.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23244. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1993-1995 Mitsubishi 3000GT, 1990-1994 Mitsubishi Eclipse, and more, this direct-fit catalytic converter also interchanges with OE parts MR239756 and MR239756, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Dorman – Exhaust Manifold Kit (Part No.H1000215862DOR)

Exhaust Manifold Kit

from

$135.84
More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:
  • Heat-shield may be included for protection of engine components where applicable
  • Cast iron or stainless tubular construction protects against warping or cracking
  • Leak-resistant for long-lasting performance
  • A rigorous quality inspection has been undertaken to ensure product standards
See More

DC Sports – 4-2-1 Ceramic Header – Fits 95-99 Eclipse GS, RS Non-Trio – 2 Pieces (Part No.MHC4001)

4-2-1 Ceramic Header - Fits 95-99 Eclipse GS, RS Non-Trio - 2 Pieces

from

$379.99
DC Sports 4-2-1 headers deliver power gains with an emphasis on low to mid range power. Dyno tuned and tested for performance. Equal length primary piping ensures optimum tuning for more power across the rpm range. Available in ceramic coated T409SS alloy. Installation instructions, all necessary hardware included.

Product Features:
  • easy direct bolt-on replacement part
  • Includes instructions and all necessary hardware
  • Dyno tuned and tested for maximum performance
  • Constructed of T409ss alloy with ceramic coating
  • Improves throttle response with Increased hp and torque
  • OEM replacement, direct bolt on installation
See More

AP Exhaust – Exhaust Pipe Gasket (Part No.H400688133APE)

Exhaust Pipe Gasket

from

$4.23
Exhaust Pipe Gasket

Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31388)

2 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials

from

$5.29
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

HJS – Exhaust Hanger (Part No.H8050303706HJS)

Exhaust Hanger

from

$8.02
Exhaust Hanger

Walker – Hanger Length 3 (Part No.35149)

Hanger Length 3

from

$21.29
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS — Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Direct-Fit Premium Resonator Assembly – 284-161 (Part No.284-161)

Direct-Fit Premium Resonator Assembly - 284-161

from

$255.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Easy Installation
  • Engineered to provide excellent exhaust performance
  • Made from 16-gauge aluminized tubing
  • Increases horsepower and torque
  • Corrosion resistant
  • Built to OEM specifications
See More

BRExhaust – Direct-Fit Premium Resonator Assembly – 283-227 (Part No.283-227)

Direct-Fit Premium Resonator Assembly - 283-227

from

$129.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Easy Installation
  • Engineered to provide excellent exhaust performance
  • Made from 16-gauge aluminized tubing
  • Increases horsepower and torque
  • Corrosion resistant
  • Built to OEM specifications
See More

BRExhaust – Exhaust Products (Part No.284-175)

Exhaust Products

from

$202.99
Bosal is a leading worldwide manufacturer of OE, replacement, and high performance exhaust systems, catalytic converters, and related components. In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs. Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition – Bosal’s line of CARB Approved Catalytic Converters.

Product Features:
  • One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.
See More

Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10228-01)

Exhaust Manifold Gasket Set

from

$26.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Ishino Stone – Exhaust Manifold Gas (Part No.A8111115274ISH)

Exhaust Manifold Gas

from

$13.87
Exhaust Manifold Gas

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95692)

EXHAUST MANIFOLD GASKET SET

from

$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31528)

3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials

from

$9.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31307)

2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials

from

$5.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60680)

Exhaust Pipe Flange Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25

from

$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-678)

Exhaust Hanger

from

$8.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-042)

Exhaust Hanger

from

$13.79
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger – 255-016 (Part No.255-016)

Exhaust Hanger - 255-016

from

$5.79
BRExhaust Replacement Exhaust InsulatorBRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers – designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

BRExhaust – Exhaust Hanger (Part No.255-659)

Exhaust Hanger

from

$2.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

1993 Eagle Talon Exhaust Parts

You count on your 1993 Eagle Talon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 30 Exhaust Parts ranging in price from $2.49 to $512.99, you’re sure to find everything you need for your 1993 Eagle Talon.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 10 different brands like Walker, Felpro, and MagnaFlow. 1993 Eagle Talon Exhaust Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 308 extensive product reviews on 1993 Eagle Talon Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials with 4.0 stars and 3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials with 5.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1993 Eagle Talon below to get started!

Top-Rated Exhaust Parts Brands For Your 1993 Eagle Talon

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Eagle Talon running right for years to come. In our inventory you’ll find brands like Walker, Felpro, MagnaFlow, and even more.

Popular Felpro Exhaust Parts

You’ll find popular Felpro brand products across Exhaust Pipes. All are waiting to get your 1993 Eagle Talon back on the road. Some of the top-rated Felpro products in these categories are:
Exhaust Pipe Flange Gasket
from $4.49
(1)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets
Exhaust Pipe Flange Gasket
from $5.79
(4)
Exhaust Pipe Flange Gasket
Exhaust Pipe and Flange Gaskets

Top-Rated Walker Exhaust Parts


If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1993 Eagle Talon, and some of our most reviewed Walker parts include:
Exhaust 35460 Exhaust System Hanger Insulator
from $6.79
(53)
Exhaust 35460 Exhaust System Hanger Insulator
Exhaust System Insulators

FAQs for 1993 Eagle Talon Exhaust Parts

What are the most purchased Exhaust Parts for the 1993 Eagle Talon?

Out of 30 Exhaust Parts for the 1993 Eagle Talon, the most popular in our inventory are:
Exhaust Manifold Gasket Set
from $26.49
This product is not rated
Exhaust Manifold Gasket Set
Exhaust Manifold Gaskets
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
from $103.99
This product is not rated
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters

What are the top-rated 1993 Eagle Talon Exhaust Parts?

Top-rated Exhaust Parts for your 1993 Eagle Talon based on customer reviews/ratings are:
3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials
from $8.99
(2)
3 Bolt Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials
“Great Gasket…would never get a different Brand….have not had issues with Walker gaskets in 15 yrs…”
Direct Fit Exhaust Manifold: With Heat Shield
from $139.99
(2)
Direct Fit Exhaust Manifold: With Heat Shield
“Bought this Manifold for my 91 Plymouth Laser RS because i still had the factory manifold on it which had a couple cracks. My exhaust manifold flange ”