1993 Chevrolet S10 Blazer Exhaust Parts

Essential Exhaust Parts for 1993 Chevrolet S10 Blazers

Felpro – Exhaust Manifold Gasket Set (Part No.MS 90746)

Exhaust Manifold Gasket Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Walker – Exhaust Bolt and Spring (Part No.36463)

Exhaust Bolt and Spring

from

$20.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • THE RIGHT CONNECTION — Designed to be used for ball and socket joint
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31398)

Exhaust Pipe Flange Gasket

from

$16.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31522)

Exhaust Pipe Flange Gasket

from

$17.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dorman – Help – Manifold Stud and Spring Kit – M10-1.5 x 77mm (Part No.03107)

Manifold Stud and Spring Kit - M10-1.5 x 77mm

from

$10.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Dorman – Exhaust Flange Hardware – Bolt And Spring – M10-1.5 x 72mm (Part No.675-203BX)

Exhaust Flange Hardware - Bolt And Spring - M10-1.5 x 72mm

from

$17.99
This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

JBA Performance – 1840S-3JT 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic (Part No.1840S-3JT)

1840S-3JT 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic

from

$721.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1840S-3JT 1 1/2″ Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic
  • Mandrel bent stainless steel tube
See More

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-210)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$128.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

Walker – Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.41965)

Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD)

from

$7.49
Complete your exhaust repair with Walker? Connectors. Featuring a smooth, burr-free finish for proper fitment, Walker? Connectors are? Manufactured from durable and robust material for long service life.?

Product Features:
  • THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
  • THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubingá
  • SMOOTH FINISH — Burr-free construction for proper fitment
  • SMOOTH FINISH — Burr-free construction for proper fitmentá
  • QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?
  • QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?á
  • BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgradeá
See More

Walker – Exhaust System Hanger Insulator (Part No.36221)

Exhaust System Hanger Insulator

from

$12.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.3391486)

California Grade CARB Compliant Direct-Fit Catalytic Converter

from

$931.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 3391486. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1988-1994 Chevrolet S10, 1988-1994 Chevrolet S10 Blazer, and additional vehicles. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat CARB Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.80906)

CalCat CARB Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$896.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dynomax – Exhaust Hangers/Hardware (Part No.36125)

Exhaust Hangers/Hardware

from

$17.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax® Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax® products – engineered for

Product Features:
  • Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
  • Hardware and accessories provide OE-style features and design for greater durability for longer service life
  • Hardware and accessories provide OE-style fit and finish for easy use and installation
  • Hardware and accessories are manufactured from premium steel to provide greater durability
  • Hardware and accessories are manufactured to work seamlessly with all Dynomax® performance parts, making installation quick and easy
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60592)

Exhaust Pipe Flange Gasket

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – Exh. Man. to Pipe Ga (Part No.H4003222587MAH)

Exh. Man. to Pipe Ga

from

$19.15
Exh. Man. to Pipe Ga

Walker – Exhaust Tail Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.45262)

Exhaust Tail Pipe 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$50.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Flange (Part No.31882)

Exhaust Flange

from

$14.29
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
  • KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
  • OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
  • OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
  • QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
  • QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
  • BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
  • BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
See More

Walker – Exhaust Flange (Part No.31928)

Exhaust Flange

from

$10.49
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
  • KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
  • OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
  • OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
  • QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
  • QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
  • BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
  • BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.41457)

Exhaust Pipe 2.25" Outlet (OD)

from

$43.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD) (Part No.44812)

Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD)

from

$62.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18280)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$76.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.18499)

SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$92.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Sound Solution Muffler (Part No.18693)

Sound Solution Muffler

from

$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Walker – Sound Solution Muffler (Part No.18763)

Sound Solution Muffler

from

$68.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Upgrade your 1993 Chevrolet S10 Blazer with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1993 Chevrolet S10 Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Exhaust Parts are key to keeping your S10 Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Exhaust Parts for the 1993 Chevrolet S10 Blazer, designed to meet your needs without breaking the bank. From Exhaust Muffler replacements to Exhaust Hangers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1993 Chevrolet S10 Blazer at great prices. Our Exhaust Parts inventory for this model ranges from just $2.49 to $931.99, with an average price of $175.51. Our 41 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1993 Chevrolet S10 Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1993 Chevrolet S10 Blazer, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Walker, Dorman, and more. FELPRO Exhaust Parts start at just $13.49 and boast an impressive 5 stars average rating from customers. Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $2.49, and at an average 4 stars rating. With 171 customer reviews and counting, our 1993 Chevrolet S10 Blazer Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1993 Chevrolet S10 Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your S10 Blazer in top shape, all in one place. Start shopping confidently below for your 1993 Chevrolet S10 Blazer!

Best-Selling Exhaust Mufflers for 1993 Chevrolet S10 Blazers

Enhance the driving experience in your Chevrolet with 6 quality Exhaust Muffler components, starting at $68.99.

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Walker – Sound Solution Muffler (Part No.18763)

Sound Solution Muffler

from

$68.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)

40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.18499)

SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$92.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18107)

SoundFX Muffler, Universal/ Fabrication Needed

from

$139.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Most Popular 1993 Chevrolet S10 Blazer Exhaust Hangers

Customize your Chevrolet with 1 Exhaust Hangers products like Exhaust System Insulators, all priced under $12.29.

Walker – Exhaust System Hanger Insulator (Part No.36221)

Exhaust System Hanger Insulator

from

$12.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Top Picks for 1993 Chevrolet S10 Blazer Exhaust Pipes

Upgrade Chevrolet S10 Blazers with top-quality Exhaust Pipes parts, including 5 OEM and aftermarket selections for your 1993 model.

Walker – Exhaust Tail Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.45262)

Exhaust Tail Pipe 2.25" Inlet (ID) 2.25" Outlet (OD)

from

$50.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60718)

Exhaust Pipe Flange Gasket

from

$13.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – Exhaust Pipe 2.25" Outlet (OD) (Part No.41457)

Exhaust Pipe 2.25" Outlet (OD)

from

$43.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.41965)

Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD)

from

$7.49
Complete your exhaust repair with Walker? Connectors. Featuring a smooth, burr-free finish for proper fitment, Walker? Connectors are? Manufactured from durable and robust material for long service life.?

Product Features:
  • THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
  • THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubingá
  • SMOOTH FINISH — Burr-free construction for proper fitment
  • SMOOTH FINISH — Burr-free construction for proper fitmentá
  • QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?
  • QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?á
  • BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgradeá
See More

Mahle – Exh. Man. to Pipe Ga (Part No.H4003222587MAH)

Exh. Man. to Pipe Ga

from

$19.15
Exh. Man. to Pipe Ga

In-Demand Exhaust Fittings for 1993 Chevrolet S10 Blazers

Select from 4 premium Exhaust Fittings parts for your 1993 Chevrolet S10 Blazer, with prices ranging from $2.49 to $17.99.

Walker – Exhaust Flange (Part No.31928)

Exhaust Flange

from

$10.49
Complete your exhaust repair with Walker¿flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes¿for¿a quality vehicle repair
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes┐for┐a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE ¿ Designed to support undercar exhaust components
  • KEEPS EXHAUST PARTS IN PLACE ┐ Designed to support undercar exhaust components
  • OE-STYLE DESIGN ¿ Designed with OE-style features for easy installation
  • OE-STYLE DESIGN ┐ Designed with OE-style features for easy installation
  • QUALITY MATERIALS¿–¿Made from quality material for durability and¿long life¿
  • QUALITY MATERIALS┐–┐Made from quality material for durability and┐long life┐
  • BETTER TOGETHER¿–¿Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade¿
  • BETTER TOGETHER┐–┐Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade┐
See More

Dynomax – Exhaust Hangers/Hardware (Part No.36125)

Exhaust Hangers/Hardware

from

$17.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax® Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax® products – engineered for

Product Features:
  • Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
  • Hardware and accessories provide OE-style features and design for greater durability for longer service life
  • Hardware and accessories provide OE-style fit and finish for easy use and installation
  • Hardware and accessories are manufactured from premium steel to provide greater durability
  • Hardware and accessories are manufactured to work seamlessly with all Dynomax® performance parts, making installation quick and easy
See More

Walker – Exhaust Clamp (Part No.35337)

Exhaust Clamp

from

$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Sold 1993 Chevrolet S10 Blazer Exhaust Manifold and Headers

Explore our best-selling Chevrolet parts for the 1993 S10 Blazer among 11 OEM and aftermarket options starting from $10.29.

Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03401)

Exhaust Manifold Hardware Kit - 3/8-16 In.

from

$11.99
Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:
  • Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
  • Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
  • Durable construction – made of quality materials for reliable service life
  • Quality assured – backed by a team of product engineers based in the United States
See More

Dorman – Help – Manifold Stud and Spring Kit – M10-1.5 x 77mm (Part No.03107)

Manifold Stud and Spring Kit - M10-1.5 x 77mm

from

$10.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-210)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$128.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

Dorman – Double Ended Stud Kit – (3) Springs (3) Studs (3) Lock Nuts (Sold by each) (Part No.675-216)

Double Ended Stud Kit - (3) Springs (3) Studs (3) Lock Nuts (Sold by each)

from

$12.99
This exhaust manifold bolt and spring kit provides a time-saving solution. Designed for direct replacement of rusted or damaged exhaust bolts and springs, it prevents exhaust leaks while allowing movement between the exhaust pipe and muffler.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Dorman – Exhaust Flange Hardware – 4 Bolts And 2 Studs – 3/8-16 (Part No.675-217)

Exhaust Flange Hardware - 4 Bolts And 2 Studs - 3/8-16

from

$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.

Product Features:
  • Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
  • Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
  • Durable construction – made of quality materials for reliable service life
  • Quality assured – backed by a team of product engineers based in the United States
See More

Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-208)

Direct Fit Exhaust Manifold: With Heat Shield

from

$147.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

JBA Performance – 1840S-3JT 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic (Part No.1840S-3JT)

1840S-3JT 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic

from

$721.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1840S-3JT 1 1/2″ Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Titanium Ceramic
  • Mandrel bent stainless steel tube
See More

JBA Performance – 1840S-3JS 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Silver Ceramic (Part No.1840S-3JS)

1840S-3JS 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Silver Ceramic

from

$721.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1840S-3JS 1 1/2″ Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive Silver Ceramic
  • Mandrel bent stainless steel tube
See More

Patriot Exhaust – H8073-1 1 5/8" Clippster Header Chevrolet S-10 LS1/LS6 82-95 Coated (Part No.H8073-1)

H8073-1 1 5/8" Clippster Header Chevrolet S-10 LS1/LS6 82-95 Coated

from

$614.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear

Product Features:
  • Patriot Exhaust H8073-1 1 5/8″ Clippster Header Chevrolet S-10 LS1/LS6 82-95 Coated
  • Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
See More

JBA Performance – 1840S-3 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive (Part No.1840S-3)

1840S-3 1 1/2" Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive

from

$574.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol

Product Features:
  • JBA Performance Exhaust 1840S-3 1 1/2″ Header Shorty Stainless Steel 88-95/02-03 Blazer 4.3L 4 Wheel Drive
  • Mandrel bent stainless steel tube
See More

Patriot Exhaust – H8073 1 5/8" Clippster Header Chevrolet S-10 LS1/LS6 82-95 Hi-Temp Black Coating (Part No.H8073)

H8073 1 5/8" Clippster Header Chevrolet S-10 LS1/LS6 82-95 Hi-Temp Black Coating

from

$412.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear

Product Features:
  • Patriot Exhaust H8073 1 5/8″ Clippster Header Chevrolet S-10 LS1/LS6 82-95 Hi-Temp Black Coating
  • Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
See More

Top-Rated Exhaust Parts Brands For Your 1993 Chevrolet S10 Blazer

Shop for the best-rated brands offering Exhaust Parts and other products for your 1993 Chevrolet S10 Blazers. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 1993 S10 Blazer start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1993 Chevrolet S10 Blazer Exhaust Parts

When it comes to maintaining or upgrading your 1993 Chevrolet S10 Blazer, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 1993 Chevrolet S10 Blazer. With over 3 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.49, with an average price of just $22.16. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

EXHAUST MANIFOLD GASKET SET
from
$31.49

(4)

EXHAUST MANIFOLD GASKET SET

“VERY GOOD PRODUCT, FITS PERFECT”

Exhaust Pipe Flange Gasket
from
$13.49

(14)

Exhaust Pipe Flange Gasket

“Bolted up fine.”

Exhaust Manifold Gasket Set
from
$21.49

(1)

Exhaust Manifold Gasket Set

“use if manifold or head surface is gnarly. I used RTV copper only, works great, no leaks.”

Popular Walker 1993 Chevrolet S10 Blazer Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1993 Chevrolet S10 Blazer owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1993 S10 Blazer, Advance Auto Parts carries a full inventory of 15 Walker Exhaust Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Walker Exhaust Parts range from $2.49 to $896.99, plus, with more than 51 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust Flange
from
$10.49
This product is not rated

Exhaust Flange

“”

SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD)
from
$92.99
This product is not rated

SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD)

“”

Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD)
from
$7.49
This product is not rated

Exhaust Pipe Connector 2.5" Inlet (ID) 2.5" Outlet (OD)

“”

FAQs for 1993 Chevrolet S10 Blazer Exhaust Parts

Which Exhaust Parts are best-sellers for 1993 Chevrolet S10 Blazers?

Out of 41 Exhaust Parts that fit 1993 Chevrolet S10 Blazers, the following parts are the top sellers:

What’s the price range for 1993 Chevrolet S10 Blazer Exhaust Parts?

Exhaust Part prices for the 1993 Chevrolet S10 Blazer start at $2.49 and go up to $931.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 1993 Chevrolet S10 Blazer?

The average price for Exhaust Parts for the 1993 Chevrolet S10 Blazer is $175.51. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Chevrolet S10 Blazer model years?

Yes, we currently carry Exhaust Parts for 11 model years of Chevrolet S10 Blazers between 1983 and 1994. Exhaust Parts are bought most frequently for the following model years: 1994, 1992, 1991, 1990, 1989, 1988, 1987, 1986, and 1985.

What are the cheapest Exhaust Parts for my 1993 Chevrolet S10 Blazer?

The cheapest 1993 Chevrolet S10 Blazer Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 1993 Chevrolet S10 Blazer?

Out of 171 reviews by customers, our 1993 Chevrolet S10 Blazer Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1993 Chevrolet S10 Blazer and their top-rated products:

What types of Exhaust Parts do you sell for my 1993 Chevrolet S10 Blazer?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1993 Chevrolet S10 Blazer:

Can I get help with 1993 Chevrolet S10 Blazer Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Exhaust Parts and more.

What is your return policy for Chevrolet S10 Blazer Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet S10 Blazer Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.