Name: Idle Air Control Valve
Brand: Carquest
SKU: 76A1005
Price: 32.99 USD

from

$32.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$85.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$181.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$37.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$34.99

Dorman offers a comprehensive line of Idle Air Control Valve Connectors for a wide range of applications. All our Idle Air Control Valve Connectors are constructed of high-quality materials for long-lasting durability. We also offer a full selection of electrical terminals to complete the job.

Product Features:

Appropriate for 4-wire configurations
Direct replacement Idle Air Control Valve Connectors available (where applicable) to ensure a proper fit
Vehicle try-on testing has been conducted on this part to ensure a trouble-free performance
Easy installation-just splice in the new socket to your existing wiring

from

$15.29

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi lock rings are designed to meet or exceed the performance of the original unit
Made out of steel to endure harsh conditions
Each lock ring is application specific to ensure the fuel system is locked in and seals properly
Always consider replacing the lock ring as a part of fuel pump service

from

$223.99

Delphi’s OE line of EGR valves provides accurate exhaust flow control and emission control; Designed and built using high-temperature and corrosion-resistant materials that perform exceptionally under all engine environments; Each valve and seat is precis

Product Features:

No spacers or washers are required and they come with gaskets for an exact fit, saving time and labor
All parts used in the manufacture process are Delphi validated, tested and matched to the vehicle application, and manufactured in a Delphi ISO certified facility
Delphi’s OE line of EGR valves provides accurate exhaust flow and emission control
Available in port, back pressure, and linear configurations to cover many engine applications
Designed and built using high-temperature and corrosion-resistant materials that perform exceptionally under all engine environments
Each valve and seat is precision machined, helping to maintain long-term stability and performance
No audible regulator noise

from

$37.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$31.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$104.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Delphi temperature sensors feature a one-piece lead-frame design from sensing element tip to connector terminals to help eliminate internal connectors and failure points

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$149.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$13.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$65.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$338.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$41.49

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket providing ease of installation.

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$28.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$77.99

GM Genuine Parts Fuel Injection Idle Air Control Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves control the engine idle, and electrically actuated valves regulate the amount of air that bypasses the closed throttle plate while at idle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide smooth engine idle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$44.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$9.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$152.99

GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$66.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$100.30

For more than a century, Delphi has been making the parts cars are born with. Delphi is proud of its OE heritage, and over the years they have used that experience to expand into a global aftermarket supplier.

Product Features:

Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation
No audible regulator noise
Consistent and predictable fuel pressure throughout system range of control provides great drivability.