1993 Chevrolet Corvette Drivetrains
More 1993 Chevrolet Corvette Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1993 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1993 Chevrolet Corvette Drivetrains
Yukon Gear – Dana 44-HD (HD Only ) Cross Pin Bolt, Standard Open & Tracloc (With C-Clip) (Part No.33240)
from
$11.99
Dana 44-HD (HD ONLY ) cross pin bolt, standard Open & TracLoc (with C-clip).
Product Features:
See More
Product Features:
- Cross pin bolt for Dana Spicer 44HD
Dorman – Rear Drive Shaft (Part No.936-290)
from
$953.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
SKF – Differential Bearing (Part No.J70601671569SKF)
from
$45.51
Differential Bearing
Motive Gear – Performance Differential Ring and Pinion (Part No.V885390L)
Yukon Gear – Side Yoke Axle Replacement Seal For Dana 44 Ica Vette And Viper (Part No.30097)
from
$36.99
Side yoke axle replacement seal for Dana 44 ICA Vette and Viper. 2.13″ OD.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Side seal
- Fits Dana Spicer 44 in 1980-1983 Corvette
- 2.13″ O.D.
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.207-L)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)
from
$103.99
12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)
from
$139.99
Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction
Yukon Gear – 3/8" X 1-1/4" Ring Gear Bolt, 55P Auburn Conversion Bolt (Part No.33052)
from
$4.99
3/8″ x 1-1/4″ ring gear bolt, 55P AUBURN conversion bolt.
Product Features:
See More
Product Features:
- Ring gear bolt
- Fits 1955-1964 GM passenger car with Auburn positraction
- 3/8″ x 1 1/4″
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Crush Sleeve (Part No.33101)
from
$13.99
Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.
Product Features:
See More
Product Features:
- Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
- 2.510″ tall
Yukon Gear – Rear Shaft Bearing For C5 & C6 Corvette (Part No.18056)
Motive Gear – Differential Pinion Nut (Part No.3752901)
from
$7.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)
from
$254.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1955-1964 GM truck and passenger car
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Powertrax – Grip LOK Traction System (Part No.LK444430)
from
$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Mr. Gasket – Differential Gasket (Part No.84A)
from
$15.99
Precision cut and high quality materials. Reusable.
Product Features:
See More
Product Features:
- Precision cut
- High-quality materials
- Reusable
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Race Driver (Part No.56020)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M802011 race
- All steel construction
Powertrax – Lock Right Locker (Part No.2415-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Felpro – Axle Housing Cover Gasket (Part No.RDS 5007)
from
$6.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Energy Suspension – Differential Carrier Bushing Set (Part No.3.1104G)
Yukon Gear – Steel Cover For Dana 44HD (Part No.32317)
Neapco – Universal Joint (Part No.1-0153)
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Yukon Gear – Carrier Installation Kit For Dana 44HD Differential (Part No.57004)
from
$204.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44HD differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44HD
- Includes carrier bearings and races and carrier shim kit
Popular 1993 Chevrolet Corvette Drivetrains Categories
1993 Chevrolet Corvette Drivetrains
You count on your 1993 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 104 Drivetrains ranging in price from $1.49 to $953.99, you’re sure to find everything you need for your 1993 Chevrolet Corvette.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, DriveWorks, and Spicer. 1993 Chevrolet Corvette Drivetrains start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 438 extensive product reviews on 1993 Chevrolet Corvette Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1993 Chevrolet Corvette below to get started!
Top-Rated Drivetrains Brands For Your 1993 Chevrolet Corvette
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Idemitsu Drivetrains
You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 1993 Chevrolet Corvette back on the road. Some of the top-rated Idemitsu products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1993 Chevrolet Corvette, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1993 Chevrolet Corvette Drivetrains
What are the most purchased Drivetrains for the 1993 Chevrolet Corvette?
Out of 104 Drivetrains for the 1993 Chevrolet Corvette, the most popular in our inventory are:
What are the top-rated 1993 Chevrolet Corvette Drivetrains?
Top-rated Drivetrains for your 1993 Chevrolet Corvette based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
