1993 Chevrolet Blazer Camshafts

Essential 1993 Chevrolet Blazer Camshafts

Sealed Power – Camshaft Bearing Set (Part No.2100M)

Camshaft Bearing Set

from

$72.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Steel backed micro Babbitt lining material
  • Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
  • Fatigue life of cam bearings are nearly doubled
  • Ensures dependable performance and superior service life
  • Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
  • Application-specific design for perfect fit and correct operation
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M 1)

Engine Camshaft Bearing Set

from

$30.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Edelbrock – Rollin’ Thunder Camshaft for 1987-Later 283-400 Non LT1 / Non Gen III (Part No.2204)

Rollin' Thunder Camshaft for 1987-Later 283-400 Non LT1 / Non Gen III

from

$413.99
Product Features:
  • Ideal for street high performance and racing applications
  • Use stock ratio rocker arms only
  • Use stock ratio rocker arms only
  • Basic operating RPM range is between 1, 500-6, 500 RPM
  • Use with Edelbrock aftermarket cylinder heads, adjustable valve-train components and 9. 5: 1 compression ratio
See More

Sealed Power – Performance Camshaft (Part No.CS-1014R)

Performance Camshaft

from

$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Reliable performance with significant power increase vs stock
  • Good low-end torque
  • Recommended for tow vehicle, street rod or muscle car
  • Power range: 1000-3500rpm
  • Idle: stock
  • Cruise: 1600-2200rpm
See More

Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

from

$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.555-030.1)

Steel Cup Expansion Plug 1-5/8 In., Height 0.500

from

$2.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)

Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each)

from

$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each) (Part No.555-030)

Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)

from

$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-202)

Engine Camshaft Thrust Button

from

$34.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.640″ Long, Used with Later Sheet Metal Covers.

Product Features:
  • All Components are Heat-Treated Steel
  • Needle Roller Bearing for a Fully Rollerized Operation
  • Used with Later Sheet Metal Covers.
See More

Mr. Gasket – Cam Button Spacer (Part No.1181)

Cam Button Spacer

from

$12.79
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent movement. If you have an engine already converted, a worn or missing cam thrust bumper will result in too much end play, resulting in erratic timing and should be checked.

Product Features:
  • Mandatory to prevent cam walk in roller cam conversions
  • Helps maintain accurate timing
  • Made from aluminum
See More

Mr. Gasket – Cam Button Spacer (Part No.1183)

Cam Button Spacer

from

$14.99
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent further movement. A worn or missing cam thrust bumper will result in too much end play, resulting in timing issues.

Product Features:
  • Mandatory to prevent cam walk in roller cam conversions
  • Helps maintain accurate timing
  • Made from aluminum
See More

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Cam Bolt Lock Plate Kit

from

$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:
  • Black oxide finished steel
  • Includes (3) grade 5 bolts & locking plate
  • Fits Chevrolet Small and Big Block without OE roller cam
  • Tabs bend up around bolt head to secure
See More

Dorman – Help – Camshaft Retainer Bolt (Part No.74114)

Camshaft Retainer Bolt

from

$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models
  • Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.

Product Features:
  • Black oxide coated Grade 5 steel
  • Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
  • Can be used as OE replacement
See More

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1019)

4WD Indicator Light Switch Connector

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2782)

Black Multi-Purpose Pigtail

from

$44.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-433-8)

Xtreme Energy 236/242 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

from

$1097.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454 (Part No.K11-444-8)

Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454

from

$1471.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)

Rollin' Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8

from

$1566.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde

Product Features:
  • Iron Camshaft Material
  • 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
  • Roller Lifter Type
  • Valve Springs Required
  • Assembly Lubricant Included
See More

Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit for Chevrolet Small Block (Part No.K12-205-2)

High Energy 206/206 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

from

$1482.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-602-4)

Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$1322.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.

Product Features:
  • Cam and lifter kit for Big Block Chevy engines
  • CL-Kit includes cam, lifters, assembly lube, instructions and decals
  • HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
  • 295/312 Advertised Duration, 243/257 Duration @ .050″, .522″/.507″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

National – Shaft Repair Sleeve (Part No.99176)

Shaft Repair Sleeve

from

$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

1993 Chevrolet Blazer Camshafts

Maybe you’re in the middle of a full rebuild of that 1993 Chevrolet Blazer. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 30 different Camshafts in our inventory ranging from $1.49 to $1,482.99. That means you can find the exact parts or products you need to keep that 1993 Chevrolet Blazer running smoothly.

Camshafts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1993 Chevrolet Blazer. Dorman, ACDelco, and Sealed Power are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Camshafts for your 1993 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5 reviews in this category, some of the top rated parts include Engine Camshaft Bearing Set with 4.0 stars and CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA with 1.0 stars.

So if you’re in the market for aftermarket Camshafts to keep your 1993 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Camshafts Brands To Make Your 1993 Chevrolet Blazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1993 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Camshafts brands and parts.

Popular Mr. Gasket Camshafts

We carry Mr. Gasket parts in our stock across Engine Camshaft Bolts categories, plus more. For a 1993 Chevrolet Blazer, our most popular Mr. Gasket Camshafts include:
Cam Bolt Lock Plate Kit
from $18.09
(2)
Cam Bolt Lock Plate Kit
Engine Camshaft Bolts

FAQs for 1993 Chevrolet Blazer Camshafts

What are the most purchased Camshafts for the 1993 Chevrolet Blazer?

Out of 30 Camshafts for the 1993 Chevrolet Blazer, the most popular in our inventory are:
Black Multi-Purpose Pigtail
from $44.99
This product is not rated
Black Multi-Purpose Pigtail
Camshaft Position Sensor Connectors
4WD Indicator Light Switch Connector
from $31.49
This product is not rated
4WD Indicator Light Switch Connector
Camshaft Position Sensor Connectors
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
from $1.49
This product is not rated
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
Camshaft Plugs

What are the top-rated 1993 Chevrolet Blazer Camshafts?

Top-rated Camshafts for your 1993 Chevrolet Blazer based on customer reviews/ratings are:
Engine Camshaft Bearing Set
from $43.49
(2)
Engine Camshaft Bearing Set
“Nicely packaged”
CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA
from $1257.99
(1)
CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA
“Front window close fit but not perfect. Doesn’t allow windows to close properly. Rear window shade didn’t fit at all. Expected much better fit for the”