1993 BMW 318is Fuel and Emissions Systems

Essential 1993 BMW 318is Fuel and Emissions Systems

Carquest Premium – Fuel Cap: 10843, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10843)

Fuel Cap: 10843, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$19.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

APA/URO Parts – Ambient Temp Sensor (Part No.P4025743812APA)

Ambient Temp Sensor

from

$40.46
Ambient Temp Sensor

Pierburg – Air Inject Check Val (Part No.B7040269654APG)

Air Inject Check Val

from

$41.94
Air Inject Check Val

Vemo – Relay (Part No.P2020309952VMO)

Relay

from

$26.12
The Vemo Relay is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings

from

$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

NTK – Switching Oxygen Sensor: 4 Wire, 29.25" Long, Heated, Direct Fit (Part No.25586)

Switching Oxygen Sensor: 4 Wire, 29.25" Long, Heated, Direct Fit

from

$118.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

NTK – Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit (Part No.25569)

Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit

from

$92.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Fuel Injector Seal (Part No.C101016838BOS)

Fuel Injector Seal

from

$2.06
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More

VDO – Fuel Tank Sender Ass (Part No.E2005124653VDO)

Fuel Tank Sender Ass

from

$220.02
Fuel Tank Sender Ass

VDO – Fuel Tank Sender Ass (Part No.E200575882VDO)

Fuel Tank Sender Ass

from

$185.67
Fuel Tank Sender Ass

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

VDO – Fuel Pump Tank Seal (Part No.E300462593VDO)

Fuel Pump Tank Seal

from

$4.98
Fuel Pump Tank Seal

Bosch – Fuel Pressure Regulator O-Ring (Part No.C3002290581BOS)

Fuel Pressure Regulator O-Ring

from

$4.63
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 5mm x 1.5mm
See More

Bosch – Relay (Part No.P2020313472BOS)

Relay

from

$15.10
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1879)

Multi Purpose Relay

from

$76.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1401)

Fuel Pump Module Assembly: With Float Arm

from

$386.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

VDO – Electric Fuel Pump Assembly (Part No.E3001115006VDO)

Electric Fuel Pump Assembly

from

$436.15
The VDO Electric Fuel Pump Assembly meets or exceeds the OE specifications for fit, durability and performance.

Product Features:
  • OE-Equivalent electric fuel pump
  • Direct fit for easy installation
  • OE connections and fittings
  • Highly efficient turbine design
  • Designed for quieter operation
See More

VDO – Electric Fuel Pump Assembly (Part No.E300150718VDO)

Electric Fuel Pump Assembly

from

$352.25
The VDO Electric Fuel Pump Assembly meets or exceeds the OE specifications for fit, durability and performance.

Product Features:
  • OE-Equivalent electric fuel pump
  • Direct fit for easy installation
  • OE connections and fittings
  • Highly efficient turbine design
  • Designed for quieter operation
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A218-1025)

Remanufactured Fuel Injector

from

$52.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2095)

Remanufactured Fuel Injector

from

$46.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Bosch – Fuel Injector 62425: New (Part No.62417)

Fuel Injector 62425: New

from

$84.99
Bosch Port Fuel Injectors (PFI) have a robust design and are capable of using Ethanol fuel (E100). All Bosch fuel injectors released to the aftermarket are OE fit, form and function, and are produced to OE specifications. The Bosch fuel injector has a return rate of 1 part per million (PPM), making Bosch the industry benchmark. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:
  • Guaranteed OE fit, form and function
  • Manufactured of the highest quality materials
  • Provides precision flow and original spray pattern for optimal performance
  • Product includes top and bottom mounting o-ring
  • Maintains new-car smoothness and drivability
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-1315)

Remanufactured Fuel Injector

from

$45.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1026)

Fuel Injection Pressure Regulator

from

$262.99
Fuel Injection Pressure Regulator

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1025)

Fuel Injection Pressure Regulator

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10380)

Fuel Injection Pressure Regulator

from

$80.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

1993 BMW 318is Fuel and Emissions Systems

You count on your 1993 BMW 318is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 31 Fuel and Emissions Systems ranging in price from $2.06 to $386.99, you’re sure to find everything you need for your 1993 BMW 318is.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 12 different brands like Delphi, ACDelco, and Carquest Premium. 1993 BMW 318is Fuel and Emissions Systems start as low as $2.06!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 8 extensive product reviews on 1993 BMW 318is Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Switching Oxygen Sensor: 4 Wire, 20" Long, Heated, Direct Fit with 4.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1993 BMW 318is below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1993 BMW 318is

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1993 BMW 318is running right for years to come. In our inventory you’ll find brands like Delphi, ACDelco, Carquest Premium, and even more.

Popular Bosch Fuel and Emissions Systems

You’ll find popular Bosch brand products across Oxygen Sensors. All are waiting to get your 1993 BMW 318is back on the road. Some of the top-rated Bosch products in these categories are:

FAQs for 1993 BMW 318is Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1993 BMW 318is?

Out of 31 Fuel and Emissions Systems for the 1993 BMW 318is, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings
from $9.99
This product is not rated
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings
Fuel Injector Seal Kits
Fuel Pump
from $79.99
This product is not rated
Fuel Pump
Fuel Pumps

What are the top-rated 1993 BMW 318is Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1993 BMW 318is based on customer reviews/ratings are:
Switching Oxygen Sensor: 4 Wire, 20" Long, Heated, Direct Fit
from $32.99
(1)
Switching Oxygen Sensor: 4 Wire, 20" Long, Heated, Direct Fit
“My car passed its emission test when this new sensor was installed, so that was good enough for me.”