1992 Toyota 4Runner Air Conditioning Parts

Essential 1992 Toyota 4Runner Air Conditioning Parts

Factory Air – New Nippondenso 10PA Clutch Assembly w/ Coil (Part No.47592)

New Nippondenso 10PA Clutch Assembly w/ Coil

from

$162.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

KAI – A/C Receiver Drier (Part No.ACM010157)

A/C Receiver Drier

from

$14.99
New Standard Replacement A/C Receiver Drier

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

DENSO – First Time Fit Relay (Part No.567-0005)

First Time Fit Relay

from

$15.99
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.

Product Features:
  • Lifecycle lasts up to 10 times longer than the competitor’s
  • Flux free micro arc welding versus competitors that solder
  • High conductive material that does not corrode
  • Shortest path for the electrical current improves efficiency
  • Offered by world’s largest relay manufacturer
See More

KAI – A/C System Seal Kit (Part No.FTT010051)

A/C System Seal Kit

from

$11.99
New Standard Replacement A/C System Seal Kit, MT2581, L3 Engine

Product Features:
  • MT2581, L3 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Evaporator Core (Part No.EVA010505)

A/C Evaporator Core

from

$141.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1252)

Multi Purpose Relay

from

$33.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – A/C Condenser Fan Assembly: Cost Effective And Reliable (Part No.621-177)

A/C Condenser Fan Assembly: Cost Effective And Reliable

from

$185.99
This A/C condenser fan assembly is precision-engineered to match the fit and performance of the stock condenser fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it functions as effectively as the original part.

Product Features:
  • Ideal replacement – this air conditioner condenser fan assembly is engineered to match the fit and performance of the stock condenser fan on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – components are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55868)

A/C Suction Line Hose Assembly

from

$50.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56301)

A/C Suction Line Hose Assembly

from

$87.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.CCA1505)

A/C Compressor Cut-Out Switch

from

$101.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1275)

A/C Compressor Cut-Out Switch

from

$11.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38884)

A/C Block Type Flange Expansion Valve

from

$46.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

DENSO – First Time Fit A/C Expansion Valve (Part No.R1045118917ND)

First Time Fit A/C Expansion Valve

from

$65.38
Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:
  • OEM Quality and Direct fit Application
  • Designed to the exact OEM specifications
See More

Carquest – Electrical Connector (Part No.PT914)

Electrical Connector

from

$54.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – A/C New; w/ Clutch; w/ 10S17C Compressor (Part No.T98306)

A/C New; w/ Clutch; w/ 10S17C Compressor

from

$343.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New; w/o Clutch; w/ 10PA15C Compressor (Part No.T58341)

A/C New; w/o Clutch; w/ 10PA15C Compressor

from

$409.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55178)

A/C Discharge Line Hose Assembly

from

$57.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55155)

A/C Discharge Line Hose Assembly

from

$53.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C New; w/ Clutch; w/ 10PA17C Compressor (Part No.T58387)

A/C New; w/ Clutch; w/ 10PA17C Compressor

from

$304.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

DENSO – New Compressor With Clutch (Part No.471-1165)

New Compressor With Clutch

from

$397.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

DENSO – New Compressor With Clutch (Part No.471-1144)

New Compressor With Clutch

from

$347.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Carquest – HVAC Variable Speed Blower Controller Module Connector (Part No.PT1017)

HVAC Variable Speed Blower Controller Module Connector

from

$58.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Santech – Air Conditioning O-Ring Kit (Part No.R1151317334SII)

Air Conditioning O-Ring Kit

from

$9.61
Air Conditioning O-Ring Kit

Santech – Air Conditioning O-Ring Kit (Part No.R1151317332SII)

Air Conditioning O-Ring Kit

from

$12.94
Air Conditioning O-Ring Kit

1992 Toyota 4Runner Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 1992 Toyota 4Runner. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 22 different Air Conditioning Parts in our inventory ranging from $9.61 to $367.99. That means you can find the exact parts or products you need to keep that 1992 Toyota 4Runner running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Toyota 4Runner. Carquest Premium, Factory Air, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 1992 Toyota 4Runner, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 18 reviews in this category, some of the top rated parts include A/C Filter Drier w/ Pad Mount with 1.0 stars and A/C New; w/ Clutch; w/ 10PA17C Compressor with 5.0 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 1992 Toyota 4Runner rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 1992 Toyota 4Runner Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Toyota 4Runner demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 4Runner the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Factory Air Air Conditioning Parts

We carry Factory Air parts in our stock across AC Line O-Rings categories, plus more. For a 1992 Toyota 4Runner, our most popular Factory Air Air Conditioning Parts include:
Cap & Valve A/C System Seal Kit
from $16.99
(6)
Cap & Valve A/C System Seal Kit
AC Line O-Rings

FAQs for 1992 Toyota 4Runner Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 1992 Toyota 4Runner?

Out of 22 Air Conditioning Parts for the 1992 Toyota 4Runner, the most popular in our inventory are:
Multi Purpose Relay
from $40.99
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Electrical Connector
from $54.99
This product is not rated
Electrical Connector
AC Compressor Clutch Connectors
HVAC Variable Speed Blower Controller Module Connector
from $58.99
This product is not rated
HVAC Variable Speed Blower Controller Module Connector
AC Compressor Relay Connectors

What are the top-rated 1992 Toyota 4Runner Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 1992 Toyota 4Runner based on customer reviews/ratings are:
A/C Filter Drier w/ Pad Mount
from $15.79
(2)
A/C Filter Drier w/ Pad Mount
“Part DOES NOT FIT TOYOTA. Yes, I read the previous review and also thought that the problem should have been fixed by now. It has not. The diameter of”
A/C New; w/ Clutch; w/ 10PA17C Compressor
from $304.99
(1)
A/C New; w/ Clutch; w/ 10PA17C Compressor
“The unit came opened at the top. The reason that is, is that you must use your existing hose plate (High & Low Hose Connections) to complete the asse”