1992 Porsche 911 Ignition and Tune-Up Products

This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. Built to ISO and SAE standards for proven performance, it offers dependable performance and durability with its Copper Plus technology. The OE type replacement plug resists fouling and boasts superior corrosion resistance. The copper core center electrode allows for accurate control of heat range, ensuring a longer life, while the nickel copper alloy center electrode tip material enhances its reliability. With a flat seat type and a resistor type, this spark plug is designed for optimal performance in small engines.

Product Features:

• Copper Plus – Dependable Performance and Durability
• OE type replacement plug
• Resists fouling
• Copper core center electrode allows for accurate control of heat range for longer life
• Superior corrosion resistance
• Built to ISO and SAE standards for proven performance
• Nickel Copper Alloy Electrode Tip: The nickel copper alloy center electrode tip material enhances the reliability and longevity of the spark plug.
• Optimal Performance Design: With a flat seat type and resistor type design, this spark plug is engineered for optimal performance in small engines.

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
• Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver exceptional acceleration and improved fuel efficiency, making them ideal for performance enthusiasts.
• Extreme Ignitability and Anti-Fouling: These spark plugs offer extreme ignitability and exceptional resistance to fouling, ensuring reliable performance in various driving conditions.

Spark Plug Wire Set

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

• OE design ensures a tight boot seal that protects against moisture intrusion
• High temperature resistant material provides greater protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
• Engineered to the specifications used by the original vehicle manufacturer for an exact fit

High-performance ignition coils from Bosch guarantee a reliable voltage from the start, more ignition energy to ensure that your engine starts and runs smoothly. Bosch ignition systems combine the security of fully developed system engineering with the employment of the latest technology. The application of Bosch ignition coils ensures all advantages of the original equipment. Bosch Ignition coils provide more ignition energy to ensure that your engine starts well and runs smoothly. High-performance ignition coils from Bosch guarantee a reliable voltage from the start.

Product Features:

• Demand controlled ignition voltage
• Long spark duration
• Better engine performance
• Reduced fuel consumption
• Reduced obnoxious emissions in exhaust gas

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

Valve Cover Washer

The Beru Ignition Wires comply exactly with OEM requirements and thus guarantee precise fitting, optimal engine performance and economical fuel consumption.

Product Features:

• OE-Equivalent and Direct fit for easy Installation.
• Copper core construction
• Resistant to high voltages up to 40,000 Volts.
• Absolutely waterproof.
• Resistant to high temperatures, corrosion and vibration
• Reliable connection system.
• Ignition noise suppressed. (VDE standard).

The Beru Ignition Wires comply exactly with OEM requirements and thus guarantee precise fitting, optimal engine performance and economical fuel consumption.

Product Features:

• OE-Equivalent and Direct fit for easy Installation.
• Copper core construction
• Resistant to high voltages up to 40,000 Volts.
• Absolutely waterproof.
• Resistant to high temperatures, corrosion and vibration
• Reliable connection system.
• Ignition noise suppressed. (VDE standard).

It is suggested that ignition coil be replaced when replacing this control unit. Installation Instructions The Model 930 6 pin Perma-Tune is designed to replace the stock ignition box and will bolt up and plug in to the same location as the stock system. The Model 930 6 pin is more than a replacement of the original ignition system; it is a performance upgrade boosting the spark energy by a factor of three. This increase in spark energy improves combustion efficiency resulting in more performance and less unburned fuel in the exhaust. Spark plug gap can be increased to .065″, (except on turbo charged cars with special spark plugs that cannot be re gapped) and solid core, unshielded copper spark plug wire can be used without causing radio noise problems. For Perma-Tune products,customer MUST call Perma-Tune directly @ 631-909-1011 PRIOR to claiming any unit as warranty. Or contact Perma-Tune @ for further information.

It is suggested that ignition coil be replaced when replacing this control unit. Installation Instructions By design, Perma-Tune ignitions make very little heat of their own. Wiring problems external of the unit will cause your Perma-Tune to get hotter to the touch than the other components under the hood. If this is the case we recommend you read the diagnostic instructions. The Model 911 increases spark energy three times that of the stock ignition system. This is why spark plugs will never foul again, can be set to .065″ spark plug gap and will actually recover from fuel contamination. The Perma-Tune system uses the points only as a sensor so they will generally last the life of the engine. Dwell is not a factor simply set the points to stock gap specifications and then adjust the engine timing using a timing light. The Model 911 Perma-Tune is designed to replace the stock ignition box and will bolt up and plug in to the same location as the stock system. If the connector on the box does not fit the car harness connector, you have the wrong box. If you have a turbo charged car, be certain that the speed relay has not caused the previous ignition box to fail before plugging in the new box. If you are installing a 911SC engine in a 911 body, use the model 911EX Engine Exchange kit. If you need a harness to install this ignition system, exchange it for a Model 911E Perma-Tune. Use the Plasma Drive Perma-Tune for late model Porsche engine management systems, hall effect distributors or after-market engine management computers. Use the Model MP Perma-Tune on magnetic pulse type distributors like the Porsche 917 or any other magnetic sensor. For Perma-Tune products,customer MUST call Perma-Tune directly @ 631-909-1011 PRIOR to claiming any unit as warranty. Or contact Perma-Tune @ for further information.

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• Meets or exceeds the OE specifications for durability and performance
• High profile insulation to prevent arching.
• Engineered to withstand extremes in temperatures

The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• Meets or exceeds the OE specifications for durability and performance
• High profile insulation to prevent arching.
• Engineered to withstand extremes in temperatures

The Beru Spark Plug Connector is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• Meets or exceeds the OE specifications for durability and performance
• High profile insulation to prevent arching.
• Engineered to withstand extremes in temperatures

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.

Product Features:

• Superior Surface Finish
• RFI Resistors (Asian) / RFI Suppression (European)
• Installation Screws
• Precision-machined Contacts
• Finely -tooled Metal Mounting Sleeve (Asian)

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch Knock Sensors are highly accurate and sensitive to detect engine knock, ensuring efficient performance and long life of your vehicle.

Product Features:

• High Precision Even under Extreme Conditions
• Improved efficiency and prolonged engine life
• Linear signal over large frequency range

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%

Product Features:

• Bosch OE quality knock sensors for optimum engine protection
• Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
• Bosch OE quality knock sensors increase torque up to 5%
• Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties

Spark Plug Wire Set

The Beru Ignition Wires comply exactly with OEM requirements and thus guarantee precise fitting, optimal engine performance and economical fuel consumption.

Product Features:

• OE-Equivalent and Direct fit for easy Installation.
• Copper core construction
• Resistant to high voltages up to 40,000 Volts.
• Absolutely waterproof.
• Resistant to high temperatures, corrosion and vibration
• Reliable connection system.
• Ignition noise suppressed. (VDE standard).

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression