1992 Mercedes-Benz 300SL Cooling and Climate Controls

Essential 1992 Mercedes-Benz 300SL Cooling and Climate Controls

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501061335BEH)

Hella Service Visco® Engine Cooling Fan clutch

from

$249.15
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.

Product Features:
  • Out of box, drop in replacements
  • Factory mounts for easy install
  • Exact fit
  • Reduced labor time
  • Higher customer satisfaction
See More

Factory Air – Ceramic Shaft Seal Kit (Part No.24016)

Ceramic Shaft Seal Kit

from

$21.29
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)

Temperature Sender With Gauge

from

$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76975)

Blower Motor: With Wheel

from

$156.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

ACM – ACM A/C Receiver Drier (Part No.R1040148407ACM)

ACM A/C Receiver Drier

from

$173.86
The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:
  • OE-Equivalent and Direct fit Application.
  • Meets or exceeds the vehicle manufacturer specifications.
  • Utilizes factory style fittings and connectors.
  • Includes the required o-rings and associated hardware
See More

Factory Air – Sealing Washer Kit (Part No.24338)

Sealing Washer Kit

from

$5.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Trimline Straight Blade Electric Fan

from

$119.99
Trimline Straight Blade Electric Fan

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – Bilstein Thermostat Housing Cover / Water Outlet (Part No.G401139361FEB)

Bilstein Thermostat Housing Cover / Water Outlet

from

$29.10
The Febi/Bilstein Thermostat Housing Cover is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE style construction
  • Quality machined thread ports
  • Corrosion and rust inhibitor coated
  • Meets or Exceeds OEM Specifications
See More

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Radiator Drain Plug

from

$6.23
Radiator Drain Plug

Behr – A/C Pressure Switch (Part No.R1054178181BEH)

A/C Pressure Switch

from

$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More

Hella – Coolant Level Sensor (Part No.G105074531HEL)

Coolant Level Sensor

from

$38.27
Coolant Level Sensor

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

A/C ACC Temp Sensor

from

$32.68
A/C ACC Temp Sensor

Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)

Radiator Cap: 20 PSI

from

$9.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3658)

ABS Wheel Speed Sensor

from

$299.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Mahle – MAHLE Thermostat (Part No.G400014603MAH)

MAHLE Thermostat

from

$22.79
Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:
  • OE quality and design
  • Maintenance-free, durable elements
See More

Carquest Premium – AC Pressure Switch (Part No.ACA1572)

AC Pressure Switch

from

$27.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
  • All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

KAI – A/C Expansion Valve, L6 Engine (Part No.ACX011004)

A/C Expansion Valve, L6 Engine

from

$33.99
New Standard Replacement A/C Expansion Valve, L6 Engine

Product Features:
  • L6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)

Air Conditioning Evaporator Temperature Sensor

from

$54.53
ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.
See More

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)

Air Conditioning Manifold Seal Kit

from

$5.41
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More

Behr – A/C Evaporator (Part No.R113066129BEH)

A/C Evaporator

from

$504.01
A/C Evaporator

Meyle – Engine Cooling Fan Blade (Part No.G505066102MEY)

Engine Cooling Fan Blade

from

$21.38
The Meyle Engine Cooling Fan Blade is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle (Part No.902-943)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 90 Degree Neck Angle

from

$43.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-310)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$183.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

1992 Mercedes-Benz 300SL Cooling and Climate Controls

You count on your 1992 Mercedes-Benz 300SL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 61 Cooling and Climate Controls ranging in price from $0.99 to $504.01, you’re sure to find everything you need for your 1992 Mercedes-Benz 300SL.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 19 different brands like Permatex, Carquest Premium, and Factory Air. 1992 Mercedes-Benz 300SL Cooling and Climate Controls start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 478 extensive product reviews on 1992 Mercedes-Benz 300SL Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Cap & Valve A/C System Seal Kit with 4.2 stars and Radiator Cap: 20 PSI with 5.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1992 Mercedes-Benz 300SL below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1992 Mercedes-Benz 300SL

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Mercedes-Benz 300SL running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1992 Mercedes-Benz 300SL back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1992 Mercedes-Benz 300SL, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 1992 Mercedes-Benz 300SL Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1992 Mercedes-Benz 300SL?

Out of 61 Cooling and Climate Controls for the 1992 Mercedes-Benz 300SL, the most popular in our inventory are:
Radiator Cap: 20 PSI
from $8.79
(16)
Radiator Cap: 20 PSI
Radiator Caps
Standard Thermostat: 192 Degrees
from $25.99
(49)
Standard Thermostat: 192 Degrees
Thermostats
Standard Thermostat: 180 Degrees
from $24.99
(8)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 1992 Mercedes-Benz 300SL Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1992 Mercedes-Benz 300SL based on customer reviews/ratings are:
Cap & Valve A/C System Seal Kit
from $16.99
(6)
Cap & Valve A/C System Seal Kit
“Good product and price.”
Radiator Cap: 20 PSI
from $9.49
(3)
Radiator Cap: 20 PSI
“Great”
Thermostat, 189 Degrees Fahrenheit
from $45.29
(1)
Thermostat, 189 Degrees Fahrenheit
“it worked and fit perfect”