1992 Mercedes-Benz 300SD Cooling and Climate Controls

Name: Reman Nippondenso 10PA17C Compressor w/ Clutch
Brand: Carquest Standard
SKU: DW57336
Price: 261.99 USD

Below you will find various in-demand Mercedes-Benz Cooling and Climate Controls, components and accessories for your 1992 300SD. Advance Auto Parts has popular 300SD parts like Blower Motor and Related Products, Engine Cooling Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 300SD model years including 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1993 and more. Select a category of 1992 Mercedes-Benz 300SD Cooling and Climate Controls below and start saving instantly.

Popular 1992 Mercedes-Benz 300SD Cooling and Climate Controls Categories

Water Pump Housing Gaskets

AC Compressor Without Clutch

Thermostats

Radiator Fan Motors

Coolant Temperature Sensors

AC Evaporator Anti-Ice Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

AC Condensers

AC Line O-Rings

AC Relay Connectors

Accumulator and Receiver Driers

ABS Speed Sensors

AC O-Ring and Gasket Kits

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

Radiator Drain Plugs

Radiator Fan Switches

AC Compressor Gaskets

Radiator Cap Adapters

Heater Core Seals

AC Compressor Seals

Engine Coolant Reservoir Clip

Radiator Support Air Deflector Clip

Essential Cooling and Climate Controls for 1992 Mercedes-Benz 300SDs

from

$261.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$48.49

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$54.53

ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.

from

$22.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$1.61

Rivet, Plastic Spread Rivet

from

$259.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$347.99

Black Magic Electric Fan

from

$46.92

METRIX receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion. METRIX receiver driers features a lightweight aluminum assembly and provides an exact fit, just as an OE-quality part should.

Product Features:

OE-Quality – Exact Fit
Utilizes factory style fittings and connectors
Compatible with both R12 and R134A refrigerant
Manufactured using the highest quality components

from

$8.14

Radiator Drain Plug

from

$292.50

The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.

Product Features:

Out of box, drop in replacements
Factory mounts for easy install
Exact fit
Reduced labor time
Higher customer satisfaction

from

$90.92

A/C Pressure Switch

from

$46.66

A/C ACC Temp Sensor

from

$3.47

ACM is a supplier of Original Equipment quality climate control products.

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$6.13

ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.

from

$377.89

Nissens’ interior blowers are high-quality spare parts designed and manufactured to comply 100% with the OE requirements, thoroughly tested to ensure the supreme product performance and durability. Nissens’ blower category offers competitive benefits such as easy and quick installation, long, trouble-free operation and enhanced comfort in the vehicle cabin. Features & Benefits

Product Features:

Designed & manufactured 100% according to OE requirements
Advanced in-house performance, mechanical and electrical tests series acc. to strict standards
Plug & Play modules, ready to install and use
Test-proven, long-life, reliable operation
Very low noise emission
Detailed product technical info available in webshop and electronic catalogue
Packaging with supreme damage protection
Compact and elegant box design
Competitive product range covering most popular European applications

from

$5.29

Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications

from

$153.19

Blower Motor Regulat

from

$9.29

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Contains all seals and gaskets needed for a complete water pump installation
Made from premium materials for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$17.99

This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$11.49

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$2.02

Rivet

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$769.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$20.70

A/C Pressure Switch

Upgrade your 1992 Mercedes-Benz 300SD with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1992 Mercedes-Benz 300SD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 300SD functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Cooling and Climate Controls for the 1992 Mercedes-Benz 300SD, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1992 Mercedes-Benz 300SD at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $769.99, with an average price of $95.54. Our 51 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 1992 Mercedes-Benz 300SD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Mercedes-Benz 300SD, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Factory Air, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Factory Air also bring quality to the table, with Cooling and Climate Controls available starting at $0.99, and at an average 4 stars rating. With 338 customer reviews and counting, our 1992 Mercedes-Benz 300SD Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Mercedes-Benz 300SD is always ready to roll. We’re committed to providing you with everything you need to keep your 300SD in top shape, all in one place. Start shopping confidently below for your 1992 Mercedes-Benz 300SD!

Best-Selling Blower Motor and Related Products for 1992 Mercedes-Benz 300SDs

Enhance the driving experience in your Mercedes-Benz with 2 quality Blower Motor and Related Product components, starting at $153.19.

show more show less

from

$377.89

Designed & manufactured 100% according to OE requirements
Advanced in-house performance, mechanical and electrical tests series acc. to strict standards
Plug & Play modules, ready to install and use
Test-proven, long-life, reliable operation
Very low noise emission
Detailed product technical info available in webshop and electronic catalogue
Packaging with supreme damage protection
Compact and elegant box design
Competitive product range covering most popular European applications

from

$153.19

Blower Motor Regulat

Most Popular 1992 Mercedes-Benz 300SD Engine Cooling Parts

Customize your Mercedes-Benz with 27 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $769.99.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$9.49

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$8.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$22.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$14.29

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$28.30

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$11.49

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$119.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$88.15

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$16.62

Radiator Cap

from

$769.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$519.99

X-Treme S-Blade Electric Fan

from

$292.50

Out of box, drop in replacements
Factory mounts for easy install
Exact fit
Reduced labor time
Higher customer satisfaction

from

$119.99

Trimline Straight Blade Electric Fan

from

$102.38

Fan Clutch

from

$46.66

A/C ACC Temp Sensor

from

$39.49

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$32.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$25.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$17.49

WATER TEMP. SENSOR

from

$8.14

Radiator Drain Plug

from

$7.65

Radiator Cap

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$2.02

Rivet

from

$1.61

Rivet, Plastic Spread Rivet

Top Picks for 1992 Mercedes-Benz 300SD Heating Parts

Upgrade Mercedes-Benz 300SDs with top-quality Heating Parts parts, including 1 OEM and aftermarket selections for your 1992 model.

show more show less

from

$3.47

ACM is a supplier of Original Equipment quality climate control products.

In-Demand Air Conditioning Parts for 1992 Mercedes-Benz 300SDs

Select from 21 premium Air Conditioning Parts parts for your 1992 Mercedes-Benz 300SD, with prices ranging from $0.99 to $427.99.

show more show less

from

$16.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$71.88

A/C Pressure Switch

from

$17.99

Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$5.29

Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications

from

$54.53

ACM is a supplier of Original Equipment quality climate control products. Located in evaporator case.

from

$427.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$334.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Validated for fit, form, and function to OE standards

from

$261.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$259.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$135.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$90.92

A/C Pressure Switch

from

$59.02

The Nissens A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meets or exceeds the vehicle manufacturer specifications.
Utilizes factory style fittings and connectors.
Includes the required o-rings and associated hardware

from

$46.92

OE-Quality – Exact Fit
Utilizes factory style fittings and connectors
Compatible with both R12 and R134A refrigerant
Manufactured using the highest quality components

from

$45.11

A/C Expansion Valve

from

$39.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$35.99

New Standard Replacement A/C Expansion Valve, L6 Engine

Product Features:

L6 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$6.13

ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.

Top-Rated Cooling and Climate Controls Brands For Your 1992 Mercedes-Benz 300SD

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1992 Mercedes-Benz 300SDs. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Factory Air, and more. Cooling and Climate Controls from these brands that fit a 1992 300SD start at just $0.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1992 Mercedes-Benz 300SD Cooling and Climate Controls

When it comes to maintaining or upgrading your 1992 Mercedes-Benz 300SD, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1992 Mercedes-Benz 300SD. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 1992 Mercedes-Benz 300SD Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1992 Mercedes-Benz 300SD owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1992 300SD, Advance Auto Parts carries a full inventory of 13 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $8.79 to $769.99, plus, with more than 21 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$14.29

This product is not rated

Radiator Cap Tester Adapter

“”

from
$769.99

This product is not rated

Radiator: With Transmission Oil Cooler

“”

from
$119.99

This product is not rated

Engine Water Pump: New, Gasket/Seals Included

“”

FAQs for 1992 Mercedes-Benz 300SD Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1992 Mercedes-Benz 300SDs?

Out of 51 Cooling and Climate Controls that fit 1992 Mercedes-Benz 300SDs, the following parts are the top sellers:

Radiator Cap: 20 PSI (17110023) – $8.79
Cap & Valve A/C System Seal Kit (15890308) – $16.99
Radiator Cap: 20 PSI (10049228) – $9.49

What’s the price range for 1992 Mercedes-Benz 300SD Cooling and Climate Controls?

Cooling and Climate Control prices for the 1992 Mercedes-Benz 300SD start at $0.99 and go up to $769.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1992 Mercedes-Benz 300SD?

The average price for Cooling and Climate Controls for the 1992 Mercedes-Benz 300SD is $95.54. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Mercedes-Benz 300SD model years?

Yes, we currently carry Cooling and Climate Controls for 9 model years of Mercedes-Benz 300SDs between 1978 and 1993. Cooling and Climate Controls are bought most frequently for the following model years: 1993, 1985, 1984, 1983, 1982, 1981, 1980, 1979, and 1978.

What are the cheapest Cooling and Climate Controls for my 1992 Mercedes-Benz 300SD?

The cheapest 1992 Mercedes-Benz 300SD Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Rivet, Plastic Spread Rivet (11033756) – $1.61
Green Round O-Ring (18890169) – $1.99
Green Round O-Ring (18890821) – $1.99
Rivet (12026625) – $2.02

What are the top-rated Cooling and Climate Controls that fit the 1992 Mercedes-Benz 300SD?

Out of 338 reviews by customers, our 1992 Mercedes-Benz 300SD Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1992 Mercedes-Benz 300SD and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Radiator Cap: 20 PSI (10049228) – $9.49
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Air Conditioning Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Radiator Cap: 20 PSI (10049228) – $9.49
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 1992 Mercedes-Benz 300SD?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1992 Mercedes-Benz 300SD:

Can I get help with 1992 Mercedes-Benz 300SD Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Cooling and Climate Controls and more.

What is your return policy for Mercedes-Benz 300SD Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 300SD Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Mercedes-Benz 300SD Cooling and Climate Controls

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57336)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1075)

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13588)

Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)

Carquest Premium – A/C Condenser (Part No.6577)

Flex A Lite – Black Magic Electric Fan (Part No.160)

Metrix – Receiver Drier (Part No.R104054391MTX)

Behr – Radiator Drain Plug (Part No.G106034117BEH)

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)

Santech – A/C Pressure Switch (Part No.R1054768236SII)

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

ACM – Heater Core O-Ring Kit (Part No.R300266094ACM)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)

Nissens – Blower Motor (Part No.R203137276NSS)

Factory Air – Sealing Washer Kit (Part No.24338)

Behr – Blower Motor Regulat (Part No.R2041750160BEH)

Beck/Arnley – Water Pump Gasket (Part No.039-4025)

Dorman – 5-Wire Style Relay (Part No.85170)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Febi – Rivet (Part No.Q20011324407FEB)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.811311)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Factory Air – Green Round O-Ring (Part No.24650)

Santech – A/C Pressure Switch (Part No.R1054178181SII)

Nissens – Blower Motor (Part No.R203137276NSS)

Behr – Blower Motor Regulat (Part No.R2041750160BEH)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13588)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Mahle – Thermostat (Part No.G400049781MAH)

Rein – Cap-Expansion Tank (Part No.CPE0026P)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2205)

Geba – Water Pump (Part No.G3000948841GEB)

Rein – Radiator Cap (Part No.G101030351RIN)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.811311)

Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)

Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Autopart International Inc – Fan Clutch (Part No.G50101946805API)

Mahle – A/C ACC Temp Sensor (Part No.R107526553MAH)

Beck/Arnley – Thermostat, 176 Degrees Fahrenheit (Part No.143-0823)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Motorad – Standard Thermostat: 185 Degrees (Part No.251-185)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1431)

Worldpac – WATER TEMP. SENSOR (Part No.C602026551FEB)

Behr – Radiator Drain Plug (Part No.G106034117BEH)

APA/URO Parts – Radiator Cap (Part No.G101030351APA)

Dorman – Help – Radiator Drain Cock Screw-In Type With Washer (Part No.61145)

Febi – Rivet (Part No.Q20011324407FEB)

Vaico – Rivet, Plastic Spread Rivet (Part No.Q2001400703VCO)

ACM – Heater Core O-Ring Kit (Part No.R300266094ACM)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

ACM – A/C Pressure Switch (Part No.R1054768236ACM)

Dorman – 5-Wire Style Relay (Part No.85170)

Factory Air – Green Round O-Ring (Part No.24650)

Factory Air – Green Round O-Ring (Part No.24610)

Factory Air – Green Round O-Ring (Part No.24615)

Factory Air – Sealing Washer Kit (Part No.24338)

ACM – Air Conditioning Evaporator Temperature Sensor (Part No.R1071406957ACM)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3606)

Carquest Premium – New Compressor with Clutch, Nippondenso 10PA17C (Part No.T58336)

Carquest Standard – Reman Nippondenso 10PA17C Compressor w/ Clutch (Part No.DW57336)

Carquest Premium – A/C Condenser (Part No.6577)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ABA1074)

Santech – A/C Pressure Switch (Part No.R1054768236SII)

Nissens – A/C Receiver Drier (Part No.R1040148407NSS)

Metrix – Receiver Drier (Part No.R104054391MTX)

Autopart International Inc – A/C Expansion Valve (Part No.R10453349390API)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38750)

KAI – A/C Expansion Valve, L6 Engine (Part No.ACX011004)

Carquest Premium – A/C Filter Drier (Part No.T33376)

ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)