1981 Mercedes-Benz 300SD Cooling and Climate Controls
More 1981 Mercedes-Benz 300SD Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1981 Mercedes-Benz 300SD, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1981 Mercedes-Benz 300SD Cooling and Climate Controls
Behr – Air Conditioning Evaporator Temperature Sensor, Without Bracket (Part No.R107137676BEH)
from
$64.09
Air Conditioning Evaporator Temperature Sensor, Without Bracket
Behr – A/C Pressure Switch (Part No.R1054178181BEH)
from
$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Flex A Lite – Black Magic Electric Fan (Part No.160)
from
$347.99
Black Magic Electric Fan
KAI – A/C Compressor, Gm, R4, 1 Groove (Part No.ACP012095)
from
$434.99
New Standard Replacement A/C Compressor, GM, R4, 1 Groove
Product Features:
See More
Product Features:
- GM, R4, 1 Groove
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26769)
from
$31.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)
from
$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – New Compressor with Clutch, GM R4 Heavy (Part No.T58228)
from
$315.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
- Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39210)
from
$29.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – Blower Motor: With Wheel (Part No.76975)
from
$156.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)
from
$5.41
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More
Behr – Radiator Drain Plug (Part No.G106034117BEH)
from
$6.23
Radiator Drain Plug
National – Bearings (Part No.5000-KFF)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Factory Air – Ceramic Shaft Seal Kit (Part No.24016)
from
$21.29
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Hella – Coolant Level Sensor (Part No.G105074531HEL)
from
$38.27
Coolant Level Sensor
Programa – HVAC Control Module (Part No.R205936334PRO)
from
$249.31
Remanufactured Programa specializes in BMW, Mercedes Benz, Volvo, Porsche and Saab remanufactured ignition control units. Remanufacturing Process:
Product Features:
See More
Product Features:
- Complete visual inspection.
- Boards and components are repaired or replaced.
- Any test that fails to meet OEM specifications is repaired or replaced.
- Once the ICU meets all OEM specifications, the unit is reassembled, sealed and packaged.
Nissens – Nissens Heater Core (Part No.R300070302NSS)
from
$138.01
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability.
Factory Air – Sealing Washer Kit (Part No.24340)
from
$9.49
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Rein – Cap-Expansion Tank (Part No.CPE0026P)
from
$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)
from
$0.62
Oil Drain Plug Gaske
Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)
from
$296.83
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.
Product Features:
See More
Product Features:
- Out of box, drop in replacements
- Factory mounts for easy install
- Exact fit
- Reduced labor time
- Higher customer satisfaction
Carquest Premium – Universal Reverse Rotation Thermal Standard Duty Fan Clutch (Part No.215131)
from
$164.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Popular 1981 Mercedes-Benz 300SD Cooling and Climate Controls Categories
1981 Mercedes-Benz 300SD Cooling and Climate Controls
You count on your 1981 Mercedes-Benz 300SD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 61 Cooling and Climate Controls ranging in price from $0.62 to $468.83, you’re sure to find everything you need for your 1981 Mercedes-Benz 300SD.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 24 different brands like Permatex, Carquest Premium, and Factory Air. 1981 Mercedes-Benz 300SD Cooling and Climate Controls start as low as $0.62!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 506 extensive product reviews on 1981 Mercedes-Benz 300SD Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Reman GM R4 Heavy Compressor w/ Clutch with 5.0 stars and Standard Thermostat: 180 Degrees with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1981 Mercedes-Benz 300SD below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1981 Mercedes-Benz 300SD
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Mercedes-Benz 300SD running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 1981 Mercedes-Benz 300SD back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 1981 Mercedes-Benz 300SD, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1981 Mercedes-Benz 300SD Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1981 Mercedes-Benz 300SD?
Out of 61 Cooling and Climate Controls for the 1981 Mercedes-Benz 300SD, the most popular in our inventory are:
What are the top-rated 1981 Mercedes-Benz 300SD Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1981 Mercedes-Benz 300SD based on customer reviews/ratings are:
from
$219.99
(2)
Reman GM R4 Heavy Compressor w/ Clutch
“So far so good, Easy to install, It works great, Time will tell. Shipping and service was above average.”
from
$22.99
(2)
Standard Thermostat: 180 Degrees
“Perfect fit, this is the correct spec. temperature for my 240D. I think the old one was a higher temp. put in by the previous owner. The car is runnin”
from
$44.99
(1)
A/C Block Type O-Ring Expansion Valve
“The one delegated for 99’s did not have the two mounting holes required by my car. I actually needed the 2000 year model valve. That one worked great.”
