Name: Vulco-Flex« II Flexible Coolant Hose
Brand: Gates
SKU: 25305
Price: 23.49 USD

from

$23.49

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$41.96

ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$74.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Made in the USA

from

$81.99

Litens Automotive is the original equipment supplier of this tensioner for this Ford application. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. The Litens replacement part maintains the round wire spring and internal damping components specified by the O.E. manufacturer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit and performance
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Heavy Duty Thermoplastic Pulley
Professional Mechanics will change this tensioner in approx. 20 minutes
Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
Installation instructions included.

from

$27.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$28.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$18.79

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$12.99

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$21.49

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

Resists electrochemical degradation and water permeation
Use with heater hose connectors and bulk heater hose to create custom assemblies
Compatible for coolant, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Caution: Do not use for fuel or oil transfer applications

from

$29.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$41.54

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$79.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$21.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$0.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$16.79

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$38.49

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features: