1992 Jeep Wrangler Exhaust System Kits

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

The MagnaFlow 2000-2006 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15855 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15855 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

This cat-back was designed for maximum ground clearance and performance. The 2.5 mandrel bent stainless steel tubing is located to the chassis using bayonet style hangers and band clamps for a hassle-free installation. All MACH Force systems come complete with a free flowing muffler, 409 stainless tubing, bayonet hangers and band clamps. This MACH Force XP uses factory mounting locations providing stability and a hassle-free installation. High quality OE style flange and band clamps are used for an improved seal.

Product Features:

• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler
• Reuses Factory Mounting Locations For A Hassle-Free Installation

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19416 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19416 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19438 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19438 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

The MagnaFlow 2007-2011 Jeep Wrangler Rock Crawler Series Cat-Back Performance Exhaust System 15239 brings superior boulder-climbing capabilities to your 3.8L 2007-2011 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15239 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15239’s emissions-legal cat-back design replaces all your rig’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15239 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High clearance design
• Aggressive exterior sound tuning
• Extensive off-road testing to meet your sound and performance needs

aFe’s Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2″ mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.

Product Features:

• Cost Effective System
• Tubing Is Less Restrictive Than Stock
• Increased Horsepower And Torque
• Aggressive Sound

This MACH Force XP Hi-Tuck Axle-Back exhaust system is constructed of 2.5″ mandrel-bent 409 stainless steel and comes complete with a free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and design of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This kit is a perfect solution for replacing damaged exhaust system components due to extreme weather, road grime or off-road driving.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Simple 1-Piece Design
• Free Flow Muffler
• Hi-Tuck Tip

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19327 19327 brings out the personality of your 3.6L 2012-2018 Jeep with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19327 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19327 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience