1992 Jeep Cherokee Body Parts

Essential 1992 Jeep Cherokee Body Parts

KAI – Body Header Panel (Part No.CH1220107V)

Body Header Panel

from

$59.99
New Economy Replacement Header Panel, Without Jeep Emblem Holes

Product Features:
  • Without Jeep Emblem Holes, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Omix – Exterior Door Handle (Part No.12035.38)

Exterior Door Handle

from

$39.99
Is your exterior door handle faded, cracked, rusty, or broken? Door handles take a lot of use and abuse. Omix-ADA can make your Jeep door handles feel and work like new. These high quality replacements fit your specific Jeep model.

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Right Side
  • Limited 5 Year Warranty
See More

Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1077)

Deck Lid / Liftgate Ajar Switch Connector

from

$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – A/C Compressor Clutch Cut-Off Relay (Part No.R3212)

A/C Compressor Clutch Cut-Off Relay

from

$27.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Omix – Fender (Part No.12035.04)

Fender

from

$181.99
Is your front fender rusty or dented? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old fender when you can start with a new one?

Product Features:
  • Right Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Push In Nylon Rivet – .250 In. (Part No.45822)

Push In Nylon Rivet - .250 In.

from

$2.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-576)

Rivet-Push In-Hole Diameter .250 In. (sold by each)

from

$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

K-Source – Mirror Assembly: Driver Side, Manual Remote Adjustment, Foldable, 1 Pk (Part No.60032C)

Mirror Assembly: Driver Side, Manual Remote Adjustment, Foldable, 1 Pk

from

$75.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass has manual remote adjustment
  • Spring loaded mechanism to avoid impact damage
  • Black
  • Superior material and manufacturing process ensures the highest quality possible
See More

Omix – Door Glass Seal (Part No.12303.73)

Door Glass Seal

from

$18.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Keeps Out The Rain And The Cold
  • Limited 5 Year Warranty
See More

Omix – Liftgate Weather Seal (Part No.12303.68)

Liftgate Weather Seal

from

$56.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Keeps Out The Rain And The Cold
  • Limited 5 Year Warranty
See More

Dorman – Chrysler, GM Molding Retainer (Part No.961-369D)

Chrysler, GM Molding Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest – Door Jamb Switch (Part No.S208)

Door Jamb Switch

from

$11.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Omix – Underhood Insulation Liner (Part No.12035.56)

Underhood Insulation Liner

from

$214.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Durable Construction For Extended Life
  • Limited 5 Year Warranty
See More

Covercraft – Custom Hood Protector (Part No.45493-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)

With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps

from

$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More

Omix – DoorSeal (Part No.12303.81)

DoorSeal

from

$42.99
DoorSeal

Omix – Window Crank Handle; (Part No.11814.05)

Window Crank Handle;

from

$12.29
Window Crank Handle;

Dorman – Nylon Defroster Retainers (Part No.961-369)

Nylon Defroster Retainers

from

$3.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Omix – Main Engine Bearing Set (Part No.17465.12)

Main Engine Bearing Set

from

$115.99
Are you rebuilding an engine and need a fresh set of main bearings? Omix-ADA offers high-quality replacement main bearing sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • Standard
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Grille Insert (Part No.12035.28)

Grille Insert

from

$75.99
Is your plastic grille insert cracked or missing? Omix-ADA offers high-quality replacements that will restore the original look to your Jeep. Why try to fix your old grille insert when you can start with a new one?

Product Features:
  • Black
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – Direct-Fit, Full Steel Door Strip, Black, Rear Door Kit, Left Or Right (Part No.55235404)

Direct-Fit, Full Steel Door Strip, Black, Rear Door Kit, Left Or Right

from

$24.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Easy To Install
See More

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56291)

Plastic Backed Door Mirror Glass

from

$154.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

KAI – Fender Flare (Part No.CH1268104)

Fender Flare

from

$39.99
New Standard Replacement Driver Side Fender Flare, Paint To Match, Country Models

Product Features:
  • Paint To Match, Country Models, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.110064)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection. Featuring the patented QuickTurn hardened stainless steel fastening system. WeatherTech MudFlaps provide protection for your vehicles most vulnerable rust area protecting the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:
  • Laser Measured To Custom Fit And Protect Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle Wheels
  • Molded From A Proprietary Thermoplastic Resin, Offers Undeniable Vehicle Protection
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • No Drilling Required And Installs In Minutes
See More

Carquest – Idle Air Control Valve Connector (Part No.PT302)

Idle Air Control Valve Connector

from

$36.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Omix – Bumper; Rear (Part No.12035.43)

Bumper; Rear

from

$164.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Chrome
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Crown Auto Jeep Replacmnt – 1 Inch Diameter, Rubber, Single (Part No.J4000334)

1 Inch Diameter, Rubber, Single

from

$4.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Omix – LiftgateGlassSeal (Part No.12304.18)

LiftgateGlassSeal

from

$85.99
LiftgateGlassSeal

1992 Jeep Cherokee Body Parts

You count on your 1992 Jeep Cherokee to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 110 Body Parts ranging in price from $0.99 to $664.99, you’re sure to find everything you need for your 1992 Jeep Cherokee.

Brands matter. If you want to shop a specific Body Parts brand, we stock 16 different brands like Dorman, Carquest, and StrongArm. 1992 Jeep Cherokee Body Parts start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 360 extensive product reviews on 1992 Jeep Cherokee Body Parts. Some of the top-rated Body Parts products we carry are Idle Air Control Valve Connector with 2.0 stars and Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material with 1.0 stars.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1992 Jeep Cherokee below to get started!

Top-Rated Body Parts Brands For Your 1992 Jeep Cherokee

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Jeep Cherokee running right for years to come. In our inventory you’ll find brands like Dorman, Carquest, StrongArm, and even more.

Popular Dorman Body Parts

You’ll find popular Dorman brand products across Bumpers and Vehicle Doors. All are waiting to get your 1992 Jeep Cherokee back on the road. Some of the top-rated Dorman products in these categories are:
Rivet-Push In-Hole Diameter .250 In.
from $5.29
(1)
Rivet-Push In-Hole Diameter .250 In.
Bumper Pad Retainer Strips
Door Lock Actuator, Front, Rear
from $56.99
(7)
Door Lock Actuator, Front, Rear
Door Lock Motors
Door Lock Rod Clips
from $7.99
(4)
Door Lock Rod Clips
Door Lock Clips

Top-Rated Dorman Body Parts


If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Body Parts for your 1992 Jeep Cherokee, and some of our most reviewed Dorman parts include:
Door Lock Rod Clips
from $6.99
(29)
Door Lock Rod Clips
Door Lock Clips
Hood Release Cable With Handle
from $48.99
(3)
Hood Release Cable With Handle
Hood Release Cables
Push In Nylon Rivet - .250 In.
from $2.29
(2)
Push In Nylon Rivet – .250 In.
Quarter Panel Extension Retainers

FAQs for 1992 Jeep Cherokee Body Parts

What are the most purchased Body Parts for the 1992 Jeep Cherokee?

Out of 110 Body Parts for the 1992 Jeep Cherokee, the most popular in our inventory are:
Push Retainer 1/4 In.
from $4.49
This product is not rated
Push Retainer 1/4 In.
Quarter Panel Extension Retainers
Door Jamb Switch
from $13.99
(1)
Door Jamb Switch
Door Jamb Switches

What are the top-rated 1992 Jeep Cherokee Body Parts?

Top-rated Body Parts for your 1992 Jeep Cherokee based on customer reviews/ratings are:
Idle Air Control Valve Connector
from $36.49
(2)
Idle Air Control Valve Connector
“was incorrect connection plug although product description stated it was exact fit for the model vehicle on which I was replacing this part.”
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
from $28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
“Thought online pic had more contour for fit. These are pretty flat and cheap looking. Can I return these?”