1992 Honda Civic Performance and Racing Products
More 1992 Honda Civic Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1992 Honda Civic, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1992 Honda Civic Performance and Racing Products
Energy Suspension – Control Arm Bushing Set (Part No.16.3105R)
from
$73.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Hyper-Flex System (Part No.16.18110R)
from
$246.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Tie Rod Dust Boot (Part No.9.13103G)
from
$6.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Monroe – Strut-Mate Coil Spring Insulator (Part No.905977)
from
$23.99
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)
Product Features:
See More
Product Features:
- Replacing all your warn strut components ensures a complete repair
- High-Quality premium strut components
- Engineered for superior fit and performance
- Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
- * Each kit sold separately
Energy Suspension – Motor Mount Insert (Part No.16.1106R)
from
$65.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
Edelbrock – Intake Gasket 1994-01 B16 & 1997-01 Acura Integra Type-R B18C5 (Part No.15041)
from
$18.99
Product Features:
See More
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Energy Suspension – Sway Bar Bushing Set (Part No.16.5112G)
from
$12.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Accel – SuperTune-Up Kit Ignition Tune Up Kit (Part No.HST1)
from
$159.99
Tune Up Kit that includes Cap, Rotor, Coil, and wires set for early Honda V Tec engines. Everything you need to Super Tune Up your Honda V Tec engine! Covers early V Tech engines. The kits includes a high performance cap and rotor. The Honda Super Coil. The 8mm 300+ wire set.
Product Features:
See More
Product Features:
- Maximize The Performance Of Your Acura/Honda
- Replace Old Parts With Fresh New Performance Parts
- Its Like Getting The Ignition Coil Free
Edelbrock – Nitrous Performer EFI Wet System (Part No.71002)
from
$599.99Product Features:
- Major Power Increases
- Power Increase From 40-60 HP
- Interfaces With The OE Fuel System
- Increases Fuel Flow
- Detailed Instructions
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1010)
from
$18.49
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More
Energy Suspension – Shock Bushing Set (Part No.16.8111R)
from
$35.99
Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Gives Shock Maximum Efficiency
- Add to the Performance of Every Shock
- Gives Instant Response/Control to Suspension
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.69-1009TWR)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Delta Flow Muffler – 2.00 Center In / 2.00 Dual Out – Aggressive Sound (Part No.9420402)
from
$104.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
MagnaFlow – Street Series Cat-Back Exhaust System: Polished Tips, Stainless Steel, Designed for Power and Sound (Part No.15645)
from
$509.99
The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound.
Product Features:
See More
Product Features:
- All Mandrel Bent Tubing
- 409 Stainless Steel Construction
- Increased Horsepower and Torque
- Made in USA
- Moderate Exterior Sound with Mild Interior Sound
MagnaFlow – Stainless Cat-Back System Performance Exhaust Kit for Honda Civic (Part No.16688)
from
$678.99
If you’re in the market for a replacement exhaust or just want something that offers you a little more power over stock, then look no further than MagnaFlow for your aftermarket exhaust needs. Made of 100% stainless steel and then fully polished to give it that extra shine, our cat-back systems not only perform, but also look good in the process.
See More
Energy Suspension – Control Arm Bushing Set (Part No.16.3105G)
from
$71.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.16.3115R)
from
$88.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1469)
from
$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Not intended for use in emission controlled vehicles.
Energy Suspension – Trailing Arm Bushing Set (Part No.16.3118G)
from
$103.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
Energy Suspension – Trailing Arm Bushing Set (Part No.16.7106R)
from
$43.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
MSD Ignition – Rotor, Honda/Aura for 8292, 82921, 82922, 8293, 8296 Cap (Part No.8092)
from
$35.99
All new Rynite injected rotors for MSD’s Honda/Acura caps! These rotors feature an all new injection molded design with brass terminal for improved transfer of the high voltage.
Product Features:
See More
Product Features:
- Resist carbon tracking
- High quality material
- Max voltage transfer
- Molded from insulated material
- Fits MSD cap PN 8292/82921/82922/8293/8298
Edelbrock – Fuel Rails (Part No.4795)
from
$159.99Product Features:
- CNC Machined From Aluminum Extrusions
- Polished Then Hard Anodized For Use w/Racing Fuel
- All Hardware Included
- Easy Installation
B & M – Manual Shifter, Precision Shifter, Acura, Honda (Part No.45047)
from
$102.99
B&M Precision aftermarket shifters; put one in your Honda Civic and find out what 50 plus years worth of engineering know-how can do for you. It features a 303 stainless steel stick and 30 percent reduction in throw for quicker more positive shifts.
Product Features:
See More
Product Features:
- Shortens Shifter Throw
- CNC Machined-303 Stainless Steel
- 6061-T6 Aluminum
- Billet 303 Stain. Steel Sticks
- Bearing Assembly In Aluminum Housing
Popular 1992 Honda Civic Performance and Racing Products Categories
1992 Honda Civic Performance and Racing Products
You count on your 1992 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 31 Performance and Racing Products ranging in price from $5.99 to $1,055.99, you’re sure to find everything you need for your 1992 Honda Civic.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like K&N, Energy Suspension, and Accel. 1992 Honda Civic Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,271 extensive product reviews on 1992 Honda Civic Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are SuperTune-Up Kit Ignition Tune Up Kit with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1992 Honda Civic below to get started!
Top-Rated Performance and Racing Products Brands For Your 1992 Honda Civic
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 Honda Civic running right for years to come. In our inventory you’ll find brands like K&N, Energy Suspension, Accel, and even more.
Popular Flowmaster Inc. Performance and Racing Products
You’ll find popular Flowmaster Inc. brand products across Performance Exhaust Products. All are waiting to get your 1992 Honda Civic back on the road. Some of the top-rated Flowmaster Inc. products in these categories are:
from
$118.99
(1)
50 Delta Flow Muffler – 2.00 Center In / 2.00 Center Out – Moderate Sound
Performance Exhaust Mufflers
Top-Rated K&N Performance and Racing Products
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 1992 Honda Civic, and some of our most reviewed K&N parts include:
from
$17.99
(205)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$199.99
(1)
Cold Air Intake: Adds Up To 4 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits
FAQs for 1992 Honda Civic Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1992 Honda Civic?
Out of 31 Performance and Racing Products for the 1992 Honda Civic, the most popular in our inventory are:
from
$47.99
(3)
High Performance Acura/Honda Clear Distributor Cap and Rotor Kit.
Performance Distributor Cap and Rotor Kits
from
$69.99
(2)
Distributor Cap and Rotor; Modified; Civic/Integra LS; 92-00
Performance Distributor Cap and Rotor Kits
What are the top-rated 1992 Honda Civic Performance and Racing Products?
Top-rated Performance and Racing Products for your 1992 Honda Civic based on customer reviews/ratings are:
from
$159.99
(1)
SuperTune-Up Kit Ignition Tune Up Kit
“If it has the Holley name on it you can bet it’s good.”
