1992 GMC S15 Jimmy Performance and Racing Products

Name: Unilite Ignition Module
Brand: Mallory
SKU: 605
Price: 95.99 USD
Rating: 5.0 (3 reviews)

Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1992 S15 Jimmy. Advance Auto Parts has popular S15 Jimmy parts like Performance Engines, Performance Steering Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other S15 Jimmy model years including 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1993, 1994 and more. Select a category of 1992 GMC S15 Jimmy Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1992 GMC S15 Jimmy Performance and Racing Products Categories

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Exhaust Headers

Universal Performance Radiator Fan Blades

Performance Shifters

Performance Engine and Transmission Mounts

Performance Engine Water Pumps

Performance Radiator Caps

Performance Distributor Components

Performance Coil Spring Insulators

Performance Exhaust Manifold Gaskets

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Brake Hose Kits

Performance Torque Converters

Essential Performance and Racing Products for 1992 GMC S15 Jimmies

from

$95.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$51.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar. Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$262.99

The K&N 57-3028 FIPK air intake system replaces the restrictive factory air filter and air intake assembly. K&N intakes are designed to dramatically reduce intake restriction allowing your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3028 air intake comes with a large, round K&N embossed chrome-topped high-flow air filter that funnels air directly into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less. The tools needed are a screwdriver and a 10 millimeter wrench.

Product Features:

Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Replaces entire factory air intake system
Easy to install, usually in 60 minutes or less
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Washable and reusable lifetime air filter
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$91.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$921.99

Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:

2800-3200 RPM
Small And Big Blocks
Serious Performance
Furnace Brazed
Fully Balanced

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$73.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$46.49

A true performance application component for cars, trucks, hot rods. For racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious To Vehicle Oils And Chemicals
Strong Enough Too Handle High Performance

from

$53.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breaker less electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

Chrome Plated
42000 Volts
Effective To 6500 RPM
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$72.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available – ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

Product Features:

Pre-Assembled
Meets DOT Guidelines And Requirements
Legal In All 50 States
Stainless Steel Braided Hose
Zinc Plated Fittings

from

$339.99

Flow tech headers are the perfect combination of performance and value. Flow tech shorty headers are precision engineered using mandrel bent tubing, formed collectors and 5/16″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance.

Product Features:

Improves exhaust pulse velocity
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware
Constructed of .049 cold roll flash mild steel tubing
Precision engineered for fitment, performance and efficiency

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$121.99

For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.

Product Features:

Maintains Better Alignment While Driving
Full Floating And Non Binding
Fits Into The Remaining Stock Control Arms

from

$60.99

MSD Ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. MSD engineers have built test fixtures and spent hundreds of hours testing and evaluating the metallurgy of our gears. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance.

Product Features:

Increased outer hardened layer thickness (RC 55-60).
Micro polished surface for smooth contact.
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear.
Interstitial carbide concentration improves wear resistance and

from

$204.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$50.99

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$243.99

Product Features:

GM 10BL 8.5 R/P 2.73 FRT/REAR MGP

from

$78.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Product Features:

Plug-In Harness w/Color Coded Wires
No cutting or splicing
Quick easy installation
Provides a direct plug-in installation
When adding an MSD Ignition control

from

$47.99

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

Made Of Superior Hyper-Flex Material
Lasts From 3 To 10 Times Longer
Assemble To Chassis Same Way As OEM
Maintains Factory Ride Characteristics
Simple Way To Increase Vehicle Height

from

$121.99

Maintains Better Alignment While Driving
Full Floating And Non Binding
Fits Into The Remaining Stock Control Arms

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$306.99

Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.

Product Features:

Base Trims To Custom Fit Floor
NHRA/IHRA Reverse Lockout Meets Requirements
Includes Neutral Safety Switch
Includes Backup Light Switch
Includes Black T-Handle and Cable

from

$539.99

The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.

Product Features:

Universal Floor Mount
Base Can Be Trimmed-Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$10.99

Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

Upgrade your 1992 GMC S15 Jimmy with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1992 GMC S15 Jimmy, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your S15 Jimmy functioning at its best. At Advance Auto Parts, we offer a wide selection of 85 Performance and Racing Products for the 1992 GMC S15 Jimmy, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Steering Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1992 GMC S15 Jimmy at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $921.99, with an average price of $201.34. Our 85 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 1992 GMC S15 Jimmy without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 GMC S15 Jimmy, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, B & M, MSD Ignition, and more. K&N Performance and Racing Products start at just $68.99 and boast an impressive 4.8 stars average rating from customers. B & M and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $73.99, and at an average 4.3 stars rating. With 263 customer reviews and counting, our 1992 GMC S15 Jimmy Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 GMC S15 Jimmy is always ready to roll. We’re committed to providing you with everything you need to keep your S15 Jimmy in top shape, all in one place. Start shopping confidently below for your 1992 GMC S15 Jimmy!

Best-Selling Performance Engines for 1992 GMC S15 Jimmies

Enhance the driving experience in your GMC with 19 quality Performance Engine components, starting at $10.99.

show more show less

from

$255.99

Weiand’s light weight, performance aluminum mechanical Action-Plus water pumps give a weight saving of 30 percent to 50 percent over stock cast-iron pumps. These pumps feature a premium quality bearing and seal that have twice the load capacity of stock pumps. Weiand’s exclusive housing counter bore keeps the bearing form walking out. All pumps are designed with the necessary bracket bosses and water connections to fit popular street applications.

Product Features:

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$255.99

Twisted Snout Water Pump Design For Updated Style
Street Performance
Heavy Duty Shaft w/5/8 in. Pilot
Six-Blade Stamped Steel
Anti-Cavitation Impeller
100 Percent Leak Tested

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$10.99

Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
3/8 inch-16 by 1 inch bolts
Kit includes 12 bolts and washers
Manufactured from high quality steel
Bolts feature hex heads

from

$37.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$686.99

HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
New Turbine Hub
New Springs/Rollers In Stator

from

$649.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, new turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

Magnum 215/215 Hydraulic Roller Cam For Chevrolet 262/4.3L

from

$611.99

Mild street performance. Slight lope at idle. Stock converter, aftermarket intake and headers. 3.40 to 4.10 gears.

Product Features:

Ultra Pro Magnum Self-Aligning Rocker Arm Set with 1.52 Ratio for V6 with 3/8" Stud

from

$399.99

These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, these rockers fit ’88+ Chevrolet V6 with a 3/8″ diameter stud.

Product Features:

Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L

from

$312.99

Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L

Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L

from

$312.99

Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L

Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 7/16" Stud

from

$51.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, this rocker fits Chevrolet Small Block and V6 with a 7/16″ diameter stud.

Product Features:

Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 7/16" Stud

from

$51.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.6 ratio, this rocker fits Chevrolet Small Block and V6 with a 7/16″ diameter stud.

Product Features:

Ultra Pro Magnum Self-Aligning Rocker Arm with 1.52 Ratio for SBC/V6 with 3/8" Stud

from

$50.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.52 ratio, this rocker fits ’88+ Chevrolet Small Block and V6 with a 3/8″ diameter stud.

Product Features:

Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 3/8" Stud

from

$50.99

Ultra Pro Magnum Self-Aligning Rocker Arm with 1.6 Ratio for SBC/V6 with 3/8" Stud

from

$50.99

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.6 ratio, this rocker fits ’88+ Chevrolet Small Block and V6 with a 3/8″ diameter stud.

Product Features:

Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 3/8" Stud

from

$50.99

Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac

from

$15.99

Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac

Most Popular 1992 GMC S15 Jimmy Performance Steering Products

Customize your GMC with 9 Performance Steering Products products like Performance Sway Bar Link Kits, Performance Sway Bar Bushings, and Performance Tie Rod End Boots, all priced under $53.99.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy To Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$51.99

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$51.99

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$50.99

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$53.99

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.49

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.49

Allows Sway Bar System To Work At 100% Efficiency
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Top Picks for 1992 GMC S15 Jimmy Performance Exhaust Products

Upgrade GMC S15 Jimmies with top-quality Performance Exhaust Products parts, including 5 OEM and aftermarket selections for your 1992 model.

show more show less

from

$139.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$83.99

DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Super Turbo mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
Dyno proven to flow up to 700 SCFM

from

$91.99

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$339.99

Improves exhaust pulse velocity
Leak Test For Max Performance
Mandrel-Formed Power Plenum
Leakproof O-Ringed Port Seals
Include All Mounting Hardware
Constructed of .049 cold roll flash mild steel tubing
Precision engineered for fitment, performance and efficiency

In-Demand Performance Air Filters for 1992 GMC S15 Jimmies

Select from 2 premium Performance Air Filters parts for your 1992 GMC S15 Jimmy, with prices ranging from $68.99 to $83.99.

show more show less

from

$83.99

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$68.99

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

Most Sold 1992 GMC S15 Jimmy Performance Ignition Products

Explore our best-selling GMC parts for the 1992 S15 Jimmy among 5 OEM and aftermarket options starting from $73.99.

show more show less

from

$78.99

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Product Features:

Plug-In Harness w/Color Coded Wires
No cutting or splicing
Quick easy installation
Provides a direct plug-in installation
When adding an MSD Ignition control

from

$95.99

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$73.99

GM Dual connector coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:

Replacement Coil For GM Dual Connector Coil
Improved Turns Ratio
Lower Primary Resistance
Bolt-In replacement coil

from

$88.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP DR-37
MSD 8226
Resist Corrosion
W/New Mounting Hardware

from

$204.99

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

Product Features:

Classic good looks
High current / voltage output
Spark plug style terminal for excellent coil wire retention
Brass contact terminals
Mounting bracket included
Can be used on inductive and CD ignitions

Top-Rated Performance and Racing Products Brands For Your 1992 GMC S15 Jimmy

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1992 GMC S15 Jimmies. Below you’ll find some of our best rated Performance and Racing Products from K&N, B & M, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1992 S15 Jimmy start at just $68.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1992 GMC S15 Jimmy Performance and Racing Products

When it comes to maintaining or upgrading your 1992 GMC S15 Jimmy, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1992 GMC S15 Jimmy. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $68.99, with an average price of just $76.49. Plus, with over 37 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $83.99

(34)

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance

“i installed this on my 94 v6 camaro 3.4l sfi and really wasnt expecting that much of a power gain. i could tell what an improvment it made as soon as ”

from $68.99

(3)

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance

“More HP and better idle.”

Popular B & M 1992 GMC S15 Jimmy Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1992 GMC S15 Jimmy owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1992 S15 Jimmy, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $349.99 to $539.99, plus, with more than 3 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $349.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $539.99

(1)

Automatic Shifter – Megashifter – Universal

“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”

from $371.99

(1)

Automatic Shifter, Sport Shifter

“This is a sweetly made product with that hotrod look and feel.This shifter was easy to install and a knock out to drive.No down falls as far as I’m aw”

FAQs for 1992 GMC S15 Jimmy Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1992 GMC S15 Jimmies?

Out of 85 Performance and Racing Products that fit 1992 GMC S15 Jimmies, the following parts are the top sellers:

High-Performance Transmission Mount (16360003) – $46.49
Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation (6900027) – $73.99
Tie Rod Dust Boot (17360833) – $5.99

What’s the price range for 1992 GMC S15 Jimmy Performance and Racing Products?

Performance and Racing Product prices for the 1992 GMC S15 Jimmy start at $5.99 and go up to $921.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1992 GMC S15 Jimmy?

The average price for Performance and Racing Products for the 1992 GMC S15 Jimmy is $201.34. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other GMC S15 Jimmy model years?

Yes, we currently carry Performance and Racing Products for 10 model years of GMC S15 Jimmies between 1983 and 1994. Performance and Racing Products are bought most frequently for the following model years: 1994, 1993, 1991, 1990, 1989, 1988, 1987, 1986, and 1985.

What are the cheapest Performance and Racing Products for my 1992 GMC S15 Jimmy?

The cheapest 1992 GMC S15 Jimmy Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360833) – $5.99
Tie Rod End Boot (Octagon) – 2-Pack (22906873) – $6.29
Tie Rod End Boot (Octagon) – 2-Pack (22906874) – $6.29
Bolt Kit Intake Hex Head (22905656) – $10.99
Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (50287860) – $15.99

What are the top-rated Performance and Racing Products that fit the 1992 GMC S15 Jimmy?

Out of 263 reviews by customers, our 1992 GMC S15 Jimmy Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1992 GMC S15 Jimmy and their top-rated products:

Performance Drivetrains
- Differential Ring And Pinion (10584326) – $342.99
Performance Air Filters
- Differential Ring And Pinion (10584326) – $342.99

What types of Performance and Racing Products do you sell for my 1992 GMC S15 Jimmy?

As of 6/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1992 GMC S15 Jimmy:

Can I get help with 1992 GMC S15 Jimmy Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.

What is your return policy for GMC S15 Jimmy Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new GMC S15 Jimmy Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 GMC S15 Jimmy Performance and Racing Products

Mallory – Unilite Ignition Module (Part No.605)

Energy Suspension – Greaseable Sway Bar Set – 1-1/8 in. (Part No.3.5190R)

K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Washable Air Filter (Part No.57-3028)

Dynomax – Ultra Flo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17222)

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

Energy Suspension – Leaf Spring Bushing Set (Part No.3.2129G)

Energy Suspension – Transmission Mount (Part No.3.1108R)

Accel – Super Stock Coil Chrome (Part No.8140C)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Russell – Street Legal Brake Line Kits for 1992-1998 JIMMY, SONOMA, 1992-1994 S10 BLAZER (Part No.672390)

Flowtech – Shorty Headers – Black Painted (Part No.11502FLT)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2042)

Energy Suspension – Control Arm Bushing Set (Part No.3.3162G)

MSD Ignition – Distributor Gear, Chevy Distributor, 0.500" ID, Iron (Part No.8531)

B & M – Transpak For 82-93 TH700R4 Transmission (Part No.70235)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5126G)

Motive Gear – Performance Differential Ring and Pinion (Part No.G885273)

MSD Ignition – Harness, MSD 6 to GM Dual-Connector Coil (Part No.8876)

Energy Suspension – Spring Isolator Set (Part No.9.6102G)

Energy Suspension – Control Arm Bushing Set (Part No.3.3162R)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

B & M – Automatic Shifter, Z-Gate (Part No.80681)

B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102R)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Weiand – Action Plus Water Pumps (Part No.9240P)

Weiand – Action Plus Water Pumps (Part No.9208P)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

B & M – Holeshot 2400 (Part No.70419)

B & M – Torque Converter, Holeshot 2000 (Part No.70417)

Competition Cams – Magnum 215/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-420-8)

Competition Cams – Ultra Pro Magnum Self-Aligning Rocker Arm Set with 1.52 Ratio for V6 with 3/8" Stud (Part No.1617-12)

Competition Cams – Xtreme Energy 212/212 Hydraulic Flat Cam for Chevrolet 262/4.3L (Part No.18-123-4)

Competition Cams – Xtreme Energy 192/200 Hydraulic Flat Cam for Chevrolet 262/4.3L (Part No.18-115-4)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 7/16" Stud (Part No.1604-1)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 7/16" Stud (Part No.1605-1)

Competition Cams – Ultra Pro Magnum Self-Aligning Rocker Arm with 1.52 Ratio for SBC/V6 with 3/8" Stud (Part No.1617-1)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.6 Ratio for Chevrolet V6 and SBC with 3/8" Stud (Part No.1602-1)

Competition Cams – Ultra Pro Magnum Self-Aligning Rocker Arm with 1.6 Ratio for SBC/V6 with 3/8" Stud (Part No.1618-1)

Competition Cams – Ultra Pro Magnum Rocker Arm with 1.52 Ratio for Chevrolet V6 and SBC with 3/8" Stud (Part No.1601-1)

Competition Cams – Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (Part No.2900-1)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102R)

Energy Suspension – Tie Rod End Boot (Octagon) – 2-Pack (Part No.9.13102G)

Energy Suspension – Greaseable Sway Bar Set – 1-1/8 in. (Part No.3.5190G)

Energy Suspension – Greaseable Sway Bar Set – 1-1/8 in. (Part No.3.5190R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5126G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

Energy Suspension – 4WD Sway Bar Kit – 32 mm (Part No.3.5158R)

Energy Suspension – Sway Bar Set (4-Pack) (Part No.3.5121R)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Dynomax – Super Turbo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17733)

Dynomax – Ultra Flo Exhaust Muffler 2.5 Inch Inlet ID 2.5 Inch Outlet ID (Part No.17222)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)

Flowtech – Shorty Headers – Black Painted (Part No.11502FLT)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2042)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-1065)

MSD Ignition – Harness, MSD 6 to GM Dual-Connector Coil (Part No.8876)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Ignition Coil, Direct-Fit Replacement, High Energy Output, Easy Installation (Part No.5526)

Accel – Gm 1984-95 Remote Supercoil (Part No.140011)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)