1992 Ford Crown Victoria Performance and Racing Products

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1992 Crown Victoria. Advance Auto Parts has popular Crown Victoria parts like Performance Oil Filters, Performance Ignition Products, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Crown Victoria model years including 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and more. Select a category of 1992 Ford Crown Victoria Performance and Racing Products below and start saving instantly.

Popular 1992 Ford Crown Victoria Performance and Racing Products Categories

Performance Oil Filters

Computer Chip Programmers

Performance Coils

Performance Exhaust Mufflers

Engine Cold Air Intakes

Performance Shifters

Performance Radiator Caps

Performance Posi Units and Components

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Ring and Pinions

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Sway Bar Bushings

Performance Brake Bleeders

Performance Nitrous Systems

Nitrous Oxide Injection System Kit

Performance Torque Converters

Essential Performance and Racing Products for 1992 Ford Crown Victorias

from

$97.99

This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:

Relocate oil filter to an easy access location

from

$308.99

Maximum performance within minutes is what this aFe Stage 1 cold air intake system delivers. Enclosed in a durable 16 gauge heat shield; a massive washable/reusable; 360 deg. conical Pro 5R air filter increases airflow resulting in an additional 6 hp; and 7 lbs./ft/ torque. This intake system also features a unique 3-angle adaptor for increased air velocity. The Pro 5R air filter is constructed with 100 percent polyurethane for long life and multiple cleaning cycles. This intake is the easiest intake on the market to install. Simply remove the factory intake and mount the 3-angle adaptor with the air filter to the MAF sensor tube and you are breathing more air and producing more power.

Product Features:

Uses Pro 5R Filter For Maximum Air Flow
Rotomolded Plastic Tube
60% cfm Flow Gain
Improved Throttle Response

from

$339.99

The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:

Ratchet Action Shifter
Cable Operated
Quick Installation
Accurate Shifting
Reverse Lockout Feature

from

$105.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$43.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$31.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$32.59

Brake Bleeder Screws

from

$605.99

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$882.99

Available in different sizes for many different vehicle models/years. Designed for EFI models. Power increases from 50-150 HP. Supplies nitrous directly into the intake system. Not for sale or use on pollution-controlled motor vehicles. In the early days of the automotive performance industry, you either ran what was available or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Designed for EFI Fords
80 HP power increase
Supplies Nitrous Directly Into The Intake Stream

from

$266.99

Product Features:

Wet To Dry Conversion System
Hose Included
Includes Fittings
Includes Solenoid
Includes All Necessary Installation Items

from

$388.99

Product Features:

Easily Concealable
Install In Minutes
Quick Removal
No Obvious Signs Of Installation
No Obvious Signs Of Use

from

$226.99

Product Features:

Dry To Wet Conversion System
Hose Included
Includes Fittings
Includes Solenoid
Includes All Necessary Installation Items

from

$239.99

If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).

Product Features:

Speedometer correction for multiple tire sizes
Return back to factory settings
Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
Internet updateable
Product might not be available in all states due to local laws.

from

$456.99

The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:

Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease.
Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
Full color LCD display
High-speed data logging/monitoring
Dual analog inputs
Most popular vehicles supported
Installs quickly and easily
Easy restoration back to stock
User adjustable vehicle parameters
USB Interface cable included
Product might not be available in all states due to local laws.

from

$229.99

Product Features:

FRD 10BLT 8.8 R/P 3.55 MGP

from

$185.99

Excel’s broad line of original equipment automotive and light truck/SUV replacement ring & pinion gears, axles, and installation kits offer Richmond’s high OEM quality at affordable prices. The Excel product line covers the most popular vehicles on the road today.

Product Features:

Richmond Gear’s EXCel drivetrain products offer high-quality OEM replacement drivetrain products for your vehicle.
Richmond Gear’s EXCel line of ring & pinon gearsets provide Richmond quality at affordable prices.
EXCel offers a broad line of ring and pinion gears, installation kits, and axle shafts to match most vehicles that are on the road today.
EXCel drivetrain products are engineered to exceed OEM specifications by manufacturing to precise specifications in world-class factories, using the latest heat treatment technology, with extensive quality controls throughout.
All EXCel drivetrain products are backed by our one year warranty.

from

$112.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$48.09

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$176.99

Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

Product Features:

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

from

$133.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$154.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$98.99

Product Features:

MINI SPOOL 8.8 FORD 28SPL

from

$371.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$441.99

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$54.39

The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:

Fits 1999-2004 4.6L And 5.4L SOHC 2V
Improved Spark Energy And Voltage Output
Patented Winding Design and Materials
Direct Bolt-In to Factory Connectors
CARB approved legal for use in all states

from

$24.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-508
MSD 8243 82438
Resists Shock And Vibration
Resists Corrosion

from

$116.99

Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Fd-487
MSD 8241

from

$186.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Upgrade your 1992 Ford Crown Victoria with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1992 Ford Crown Victoria, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Crown Victoria functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Performance and Racing Products for the 1992 Ford Crown Victoria, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1992 Ford Crown Victoria at great prices. Our Performance and Racing Products inventory for this model ranges from just $22.79 to $926.99, with an average price of $232.95. Our 41 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1992 Ford Crown Victoria without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Ford Crown Victoria, we stock popular OEM and aftermarket Performance and Racing Products from top names like SCT Performance MSD Ignition, and more. SCT Performance Performance and Racing Products start at just $456.99 and boast an impressive 5 stars average rating from customers. With 15 customer reviews and counting, our 1992 Ford Crown Victoria Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Ford Crown Victoria is always ready to roll. We’re committed to providing you with everything you need to keep your Crown Victoria in top shape, all in one place. Start shopping confidently below for your 1992 Ford Crown Victoria!

Best-Selling Performance Oil Filters for 1992 Ford Crown Victorias

Enhance the driving experience in your Ford with 1 quality Performance Oil Filter components, starting at $97.99.

show more show less

from

$97.99

Relocate oil filter to an easy access location

Most Popular 1992 Ford Crown Victoria Performance Ignition Products

Customize your Ford with 4 Performance Ignition Products products like Performance Coils and Performance Ignition Kits, all priced under $186.99.

show more show less

from

$117.99

Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.

Product Features:

Designed to use w/late model Ford waste spark ignition systems
83:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Secondary towers designed for snap on spark plug terminals
Primary terminals require Ford style connector

from

$116.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Fd-487
MSD 8241

from

$176.99

Easily install two DIS-4 Ignitions on late model Ford Engines
Easy Connections w/No Splicing Or Cutting Into Factory Wiring
Wiring the system will take only an hour
Multiple direct plug in connectors
Wiring the system will only take and hour

from

$186.99

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top Picks for 1992 Ford Crown Victoria Performance Steering Products

Upgrade Ford Crown Victorias with top-quality Performance Steering Products parts, including 5 OEM and aftermarket selections for your 1992 model.

show more show less

from

$43.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$43.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$31.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$30.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$43.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

In-Demand Performance Exhaust Products for 1992 Ford Crown Victorias

Select from 1 premium Performance Exhaust Products parts for your 1992 Ford Crown Victoria.

show more show less

from

$133.99

Most Sold 1992 Ford Crown Victoria Performance Engines

Explore our best-selling Ford parts for the 1992 Crown Victoria among 1 OEM and aftermarket options starting from $605.99.

show more show less

from

$605.99

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

Top-Rated Performance and Racing Products Brands For Your 1992 Ford Crown Victoria

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1992 Ford Crown Victorias. Below you’ll find some of our best rated Performance and Racing Products from SCT Performance and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1992 Crown Victoria start at just $117.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular SCT Performance 1992 Ford Crown Victoria Performance and Racing Products

When it comes to maintaining or upgrading your 1992 Ford Crown Victoria, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. SCT Performance ticks all of those boxes. We offer a wide selection of SCT Performance Performance and Racing Products, specifically designed for the 1992 Ford Crown Victoria. With over 1 SCT Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $456.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our SCT Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$456.99

(1)

Preloaded Performance Programmer for Increased Horsepower & Torque

“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”

Popular MSD Ignition 1992 Ford Crown Victoria Performance and Racing Products

MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1992 Ford Crown Victoria owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1992 Crown Victoria, Advance Auto Parts carries a full inventory of 2 MSD Ignition Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $117.99 to $176.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from
$117.99

(1)

Coil; Ford DIS Coil Pack; 4 Tower; Stock

“Replaced in 1996 Mustang Cobra SVT. Works great.”

from
$176.99

This product is not rated

Harness; Ford 4.6L Modular to DIS-4 Ignition

“”

FAQs for 1992 Ford Crown Victoria Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1992 Ford Crown Victorias?

Out of 41 Performance and Racing Products that fit 1992 Ford Crown Victorias, the following parts are the top sellers:

Preloaded Performance Programmer for Increased Horsepower & Torque (11844157) – $456.99
Thermocap Radiator Cap (10648825) – $48.09
Remote Oil Filter Kit (6370003) – $97.99

What’s the price range for 1992 Ford Crown Victoria Performance and Racing Products?

Performance and Racing Product prices for the 1992 Ford Crown Victoria start at $22.79 and go up to $926.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1992 Ford Crown Victoria?

The average price for Performance and Racing Products for the 1992 Ford Crown Victoria is $232.95. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford Crown Victoria model years?

Yes, we currently carry Performance and Racing Products for 19 model years of Ford Crown Victorias between 1993 and 2011. Performance and Racing Products are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2003.

What are the cheapest Performance and Racing Products for my 1992 Ford Crown Victoria?

The cheapest 1992 Ford Crown Victoria Performance and Racing Products we carry in stock are:

Differential Pinion Solid Spacer Kit w/Shims (19640050) – $22.79
Sway Bar Bushing Set (22906934) – $30.99
Sway Bar Bushing Set (22906932) – $31.99
Brake Bleeder Screws (17120983) – $32.59
Brake Bleeder Screws (17120989) – $40.99

What types of Performance and Racing Products do you sell for my 1992 Ford Crown Victoria?

As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1992 Ford Crown Victoria:

Can I get help with 1992 Ford Crown Victoria Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford Crown Victoria Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford Crown Victoria Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1992 Ford Crown Victoria Performance and Racing Products

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

aFe POWER – Magnum FORCE Cold Air Intake: Open Housing With Oiled Air Filter For Maximum Airflow (Part No.54-10751)

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Energy Suspension – Control Arm Bushing Set (Part No.4.3162R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5171G)

Energy Suspension – Sway Bar Bushing Set (Part No.9.5171G)

Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

B & M – Torque Converter, Tork Master 2400 (Part No.40438)

Edelbrock – Performer Ford EFI Nitrous Systems for 1986-95 Mustang 5.0L/1996-98 4.6L (80 Hp) (Part No.70400)

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)

Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Motive Gear – Performance Differential Ring and Pinion (Part No.F888355)

Richmond Gear – Differential Ring And Pinion (Part No.F88355)

Energy Suspension – Control Arm Bushing Set (Part No.4.3150R)

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

Motive Gear – Differential Mini Spool (Part No.MS88-28)

Powertrax – Lock Right Locker (Part No.1822-LR)

Powertrax – Lock Right Locker (Part No.1821-LR)

MSD Ignition – Coil; Ford 4.6/5.4L 2-Valve 98-14 Single (Part No.8242)

Accel – Coil:Ford Mod Eng 3-Valve (Part No.140033)

Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)

Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5170R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5171G)

Energy Suspension – Sway Bar Bushing Set (Part No.9.5171G)

Energy Suspension – Sway Bar Bushing Set (Part No.9.5170G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5170G)

Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)

B & M – Torque Converter, Tork Master 2400 (Part No.40438)