1992 Chevrolet S10 Engine Cooling Parts

Essential 1992 Chevrolet S10 Engine Cooling Parts

GM Genuine Parts – Engine Coolant Water Outlet (Part No.15-1794)

Engine Coolant Water Outlet

from

$76.99
GM Genuine Parts Engine Coolant Water Outlets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine coolant water outlets are housings that connect the radiator hoses to the engine, typically housing the engine coolant thermostat. For certain applications, the water outlet contains threaded holes or ports for sensors and switches. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Thick base helps prevent leaks by minimizing warpage
  • Leak-resistant Neoprene O-ring seal
  • Helps your cooling system function properly
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Flex A Lite – Belt-Driven Fan Spacer (Part No.516)

Belt-Driven Fan Spacer

from

$18.99
Belt-Driven Fan Spacer

KAI – Cooling Fan Shroud (Part No.GM3110124)

Cooling Fan Shroud

from

$11.99
New Platinum Pro Lower Fan Shroud, 4.3 Liter V6 Engine

Product Features:
  • 4.3 Liter V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorcraft – Original Equipment Radiator Cap (Part No.G1010196371MTR)

Original Equipment Radiator Cap

from

$7.28
The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • Standard and safety vent radiator pressure caps available
  • Extensive coverage for most cars and trucks, as well as farm and construction equipment
  • Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
  • Zinc-plated to resist corrosion and rust
  • Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
  • Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
  • Pressure and vacuum relief features help extend radiator and hose life
  • Prevent accidental cap removal with positive low-pressure stop feature
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1092)

Air Charge Temperature Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35062)

Engine Coolant Outlet Gasket

from

$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

US MOTOR WORKS – Water Pump with Fan Clutch (Part No.MCK1033)

Water Pump with Fan Clutch

from

$90.99
US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:
  • Fan clutch mounts to the water pump and should be replaced at the same time.
  • Matched set for proper water pump or fan clutch replacement
  • Includes mounting hardware, gaskets and accessories as required.
  • Complete mechanical cooling parts replacement
  • Factory tested and 100% new product
  • Meets or exceeds OEM quality
See More

ACDelco – Water Pump Kit (Part No.252-711)

Water Pump Kit

from

$99.99
An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
  • Thoroughly tested for reliable, leak-free performance
  • Coated seals support seal longevity and durability
  • Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
  • High-quality bearings are permanently sealed and lubricated for greater durability and long life
  • Come with premium, high-quality replacement components needed for trouble-free and accurate installation
  • Uniform wall sections and smooth coolant-flow cavities for efficient operation
  • Cast-iron or aluminum design, depending on vehicle application
See More

ACDelco – GM Original Equipment Engine Coolant Thermostat (Part No.G4000202671ACD)

GM Original Equipment Engine Coolant Thermostat

from

$28.42
An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Autopart International Inc – Radiator (Part No.G1000651138API)

Radiator

from

$197.41
Radiator

Mahle – Engine Coolant Thermostat Housing Gasket (Part No.G4020210085MAH)

Engine Coolant Thermostat Housing Gasket

from

$6.66
The Mahle Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Mahle – Water Pump Hsng Gask (Part No.G3031212899MAH)

Water Pump Hsng Gask

from

$2.04
Water Pump Hsng Gask

Felpro – WATER PUMP MOUNTING GASKET SET (Part No.ES 73030)

WATER PUMP MOUNTING GASKET SET

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Thermostatic Fan Control - Adjustable

from

$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160°F – 210°F thread-in probe
  • For use with Imperial electric fans
  • Thread-in probe for installation in water jacket or radiator
See More

Dorman – Help – Radiator Drain Cocks (Part No.61122)

Radiator Drain Cocks

from

$4.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Motorad – Thermostat Kit-195 Degrees w/ Gasket and Seal (Part No.4993KT)

Thermostat Kit-195 Degrees w/ Gasket and Seal

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Water Pump Mounting Hardware Kit (Part No.902-807)

Water Pump Mounting Hardware Kit

from

$16.29
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-2035)

Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle

from

$29.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54217)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$21.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10075)

Engine Coolant Temperature Sensor

from

$29.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Mahle – Engine Coolant Thermostat O-Ring (Part No.G4030204690MAH)

Engine Coolant Thermostat O-Ring

from

$4.09
The Mahle Engine Coolant Thermostat O-Ring is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020210271ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$66.21
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

Felpro – Engine Coolant Outlet Gasket (Part No.35613)

Engine Coolant Outlet Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Fan Blade (Part No.G5050374484DOR)

Fan Blade

from

$71.91
Restore clutch-driven fans to original functioning and sustain proper engine operation with Dorman’s Engine Cooling Fan Blade. Its construction features reinforcement that reduces blade flexing at operating temperatures, improving thermal stability.

Product Features:
  • Helps to prevent engine overheating
  • Direct replacement for a proper fit every time
  • Easy to install
  • Durable construction for long-lasting performance
See More

1992 Chevrolet S10 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1992 Chevrolet S10. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 109 different Engine Cooling Parts in our inventory ranging from $2.04 to $439.99. That means you can find the exact parts or products you need to keep that 1992 Chevrolet S10 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Chevrolet S10. Carquest Premium, Permatex, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1992 Chevrolet S10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 6,302 reviews in this category, some of the top rated parts include THERMOSTAT GASKET with 4.9 stars and Radiator Cap: 16 PSI with 4.6 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1992 Chevrolet S10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1992 Chevrolet S10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Chevrolet S10 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your S10 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Delphi Engine Cooling Parts

We carry Delphi parts in our stock across Coolant Temperature Sensors categories, plus more. For a 1992 Chevrolet S10, our most popular Delphi Engine Cooling Parts include:
Engine Coolant Temperature Sensor
from $29.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

FAQs for 1992 Chevrolet S10 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1992 Chevrolet S10?

Out of 109 Engine Cooling Parts for the 1992 Chevrolet S10, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
Thermostat Housing Gaskets

What are the top-rated 1992 Chevrolet S10 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1992 Chevrolet S10 based on customer reviews/ratings are:
THERMOSTAT GASKET
from $4.99
(93)
THERMOSTAT GASKET
“OEM perfect fit.”
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
“Better then the factory one”
Coolant Temp Sensor Switch
from $24.05
(56)
Coolant Temp Sensor Switch
“Very good replacement part.”