1992 Chevrolet Corvette Alternators and Starters
Find Your Specific 1992 Chevrolet Corvette Alternators and Starters
Below you will find various in-demand Chevrolet Alternators and Starters, components and accessories for your 1992 Corvette. Advance Auto Parts has popular Corvette parts like Starter Parts, Alternator Parts, Ignition Lock Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Corvette model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1992 Chevrolet Corvette Alternators and Starters below and start saving instantly.
Popular 1992 Chevrolet Corvette Alternators and Starters Categories
Essential Alternators and Starters for 1992 Chevrolet Corvettes
Carquest Premium – Multi-Use Connector (Part No.PTA1127)
from
$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1263)
from
$14.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1165)
from
$30.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Multi-Use Connector (Part No.PTA1047)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Alternator Electrical Connector (Part No.PT68)
from
$4.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Multi-Use Connector (Part No.PTA1097)
from
$3.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – New Voltage Regulator (Part No.RAA1056)
from
$24.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – New Voltage Regulator (Part No.RAE1008)
from
$79.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
ACDelco – Voltage Regulator (Part No.D618)
from
$100.99
GM Genuine Parts Voltage Regulators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It monitors the proper voltage to your vehicle’s critical systems as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. A GM Genuine Parts Voltage Regulator provides outstanding radio noise control for better performance and delivers needed system voltage. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.3510MSN)
from
$137.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
GM Genuine Parts – Starter: Remanufactured (Part No.323-1625)
from
$474.99
Product Features:
See More
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
- Features a clockwise (right) rotation with 11-tooth configuration and 12 VDC voltage, tailored for optimal compatibility with GM vehicles.
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3631S)
from
$98.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
- Remanufactured to meet or exceed OE specifications, ensuring reliable fit, form, and function for optimal vehicle performance.
- 100% electronic testing of critical components and the entire unit guarantees dependable operation and long-lasting durability.
Product Features:
Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)
from
$9.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.
Product Features:
See More
Product Features:
- Conveniently available in various styles and in packs of different quantities
- High quality steel construction
- Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
- Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
Locksmart – Ignition Lock Cylinder (Part No.LC14280)
from
$25.05
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
- Constructed from high-grade materials to ensure durability and longevity
- Undergoes 100% testing for proper fit, form, and function
- As a global manufacturer, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Ignition Lock Cylinder (Part No.CSC2575)
from
$178.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Lock Cylinder (Part No.CSA2304)
from
$43.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
FAG US – Radial Insert Ball Bearing (Part No.6203-RSR)
from
$36.49
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.
Product Features:
See More
Product Features:
- Radial Ball Bearing, Both Sides Shield.
- Coverage of classic and new high-tech solutions for the best system coverage
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Carquest Premium – Alternator: Remanufactured, 61 Amps, Limited Lifetime Warranty (Part No.7127-12A)
from
$93.99
The Carquest Premium Remanufactured Alternator delivers exceptional reliability and performance, making it a trusted choice for your vehicle’s electrical system. Designed to meet or exceed OE quality in fit, form, and function, this alternator undergoes a rigorous remanufacturing process where all wear components, such as brushes, bushings, and bearings, are replaced with brand-new parts. Each unit is triple-tested from individual components to final assembly, ensuring dependable service and consistent performance. With a 61-amp output, 12.0 VDC voltage, and a clockwise rotation direction, it is engineered for precision and compatibility with Delco family systems. For added peace of mind, Carquest offers a Tech Hotline staffed by ASE Certified Technicians to assist with any technical inquiries. Choose this alternator for a durable, high-quality solution that keeps your vehicle running smoothly.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
- Engineered for precision compatibility with Delco family systems, ensuring seamless integration and reliable operation.
- Delivers a consistent 61-amp output to support your vehicle’s electrical demands effectively.
Carquest Standard – Alternator: Remanufactured, 63 Amps, 1 Year Limited Warranty (Part No.7127-3AV)
from
$69.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Standard – Alternator: Remanufactured, 63 Amps, 1 Year Limited Warranty (Part No.7127-9AV)
from
$63.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Premium – Alternator: Remanufactured, 145 Amps, Limited Lifetime Warranty (Part No.13969CPA)
from
$305.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1015)
from
$25.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1047)
from
$65.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1008)
from
$31.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1021)
from
$68.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1052)
from
$311.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Upgrade your 1992 Chevrolet Corvette with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 1992 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Alternators and Starters are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Alternators and Starters for the 1992 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Starter Part
replacements to
Alternator Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1992 Chevrolet Corvette at great prices.
Our Alternators and Starters inventory for this model
ranges from just $9.99 to $284.99, with
an average price of $72.41.
Our 15 Alternators and Starters in stock come from 6 trusted brands, so you’re sure to find the right part for your 1992 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Chevrolet Corvette, we stock popular OEM and aftermarket Alternators and Starters from top names
like GM Genuine, DriveWorks, Dorman, and more.
GM Genuine Alternators and Starters
start at just $92.99 and boast an impressive 4.5 stars average rating from customers.
DriveWorks and Dorman also bring quality to the table, with Alternators and Starters available starting at $9.99, and at an average 4.3 stars rating.
With 30 customer reviews and counting, our 1992 Chevrolet Corvette Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1992 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 1992 Chevrolet Corvette!
Best-Selling Starter Parts for 1992 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 2 quality Starter Part components, starting at $9.99.
Dorman – Help – Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (Part No.02350)
from
$9.99
Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.
Product Features:
See More
Product Features:
- Conveniently available in various styles and in packs of different quantities
- High quality steel construction
- Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
- Dorman’s Starter Motor Shims are constructed to strict engineering quality standards
Carquest Premium – Starter: Remanufactured (Part No.17129S)
from
$134.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Most Popular 1992 Chevrolet Corvette Alternator Parts
Customize your Chevrolet with 6 Alternator Parts products
like Alternators,
Alternator Pigtails, and
Commutator End Bearings, all
priced under $284.99.
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Multi-Use Connector (Part No.PTA1047)
from
$20.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Bosch – Alternator: New, 124 Amps, Limited Lifetime Warranty (Part No.AL8684N)
from
$249.99
The Bosch Premium Alternator delivers exceptional performance and reliability, making it a top choice for demanding driving conditions. Engineered with 100% new components, it is built to endure the harshest environments, excessive heat, and high electrical demands, ensuring a long service life. With an impressive 124-amp rating and 12 VDC output, this alternator provides consistent power for your vehicle’s electrical systems. Its clockwise rotation and precisely gauged mounting points ensure a perfect fit and hassle-free installation. As an added benefit, every purchase includes free 24-hour Roadside Assistance Protection, offering peace of mind on the road. Designed for durability and peak performance, this alternator is a smart investment for maintaining your vehicle’s reliability.
Product Features:
See More
Product Features:
- 100% new components withstand the harshest environments for the best performance and longest life
- Built specifically to withstand excessive heat and high electrical demands.
- All mounting points 100% gauged and resized or rethreaded for proper fit
- Free 24-hour Roadside Assistance Protection with purchase of any Bosch Alternator
- Provides consistent 124-amp power output to support demanding vehicle electrical systems effectively.
WAI – Delco Cs144 Ir/Ef 120 Amp/12 Volt, Cw, 5-Groove Pulley, 01:30 Plug Clock, Limited Lifetime Warranty (Part No.7901-2N-5G)
from
$284.99
This 120-amp alternator from WAI is engineered to deliver exceptional performance and reliability, making it a top choice for aftermarket replacements. Designed to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. The advanced voltage regulator protection safeguards against transient voltage spikes, preventing potential battery damage, while its low saturation voltage minimizes heat dissipation for enhanced durability. Featuring a high-power rectifier assembly with open junction press-fit diodes, this alternator is built to run cooler and more efficiently. Each unit is rigorously tested, and a printed copy of the test results is included, giving you confidence in its performance from the moment it powers on. With WAI’s commitment to quality, this alternator offers long-lasting value and dependable operation for your vehicle.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
- High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
- Built for enhanced durability, the alternator’s advanced design minimizes heat dissipation, ensuring reliable and efficient performance over extended use.
Carquest Premium – Alternator: Remanufactured, 120 Amps, Limited Lifetime Warranty (Part No.7864-2A)
from
$179.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator Rectifier Bridge (Part No.SCA1047)
from
$65.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.
Product Features:
See More
Product Features:
- Application matched components ensure the charging system can be returned to like new condition.
Top Picks for 1992 Chevrolet Corvette Ignition Lock Parts
Upgrade Chevrolet Corvettes with top-quality Ignition Lock Parts parts, including 5 OEM and aftermarket selections for your 1992 model.
GM Genuine Parts – Ignition Lock Cylinder: Keys Included, Mounting Hardware Not Included (Part No.D1456C)
from
$92.99
GM Genuine Parts Ignition Lock Cylinders are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These cylindrical tumblers are used to help power on and start your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps power on and start your vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
- Collision parts are designed to help promote proper and safe repair
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-010)
from
$58.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Ignition Lock Cylinder (Part No.CSA4277)
from
$55.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Lock Cylinder (Part No.CSA1634)
from
$64.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Ignition Lock Cylinder Assembly (Part No.924-894)
from
$47.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
In-Demand Voltage Regulator Parts for 1992 Chevrolet Corvettes
Select from 2 premium Voltage Regulator Parts parts for your 1992 Chevrolet Corvette, with prices ranging from $19.99 to $48.99.
Carquest Premium – New Voltage Regulator (Part No.RAA3137)
from
$48.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – Multi-Use Connector (Part No.PTA1127)
from
$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Top-Rated Alternators and Starters Brands For Your 1992 Chevrolet Corvette
Shop for the best-rated brands offering Alternators and Starters and other products for your 1992 Chevrolet Corvettes. Below you’ll find some of our best rated Alternators and Starters from GM Genuine, DriveWorks, and Dorman, and more. Alternators and Starters from these brands that fit a 1992 Corvette start at just $9.99 and are rated as high as 4.5 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular GM Genuine 1992 Chevrolet Corvette Alternators and Starters
When it comes to maintaining or upgrading your 1992 Chevrolet Corvette, using quality Alternators and Starters is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Alternators and Starters, specifically designed for the 1992 Chevrolet Corvette. With over 1 GM Genuine brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 2 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(2)
Ignition Lock Cylinder: Keys Included, Mounting Hardware Not Included
“Not available at local Advance stores, but was shipped to my home in a few days.”
Popular DriveWorks 1992 Chevrolet Corvette Alternators and Starters
DriveWorks auto parts is one of the highest quality Alternators and Starter brands in the market. Any 1992 Chevrolet Corvette owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1992 Corvette, Advance Auto Parts carries a full inventory of 1 DriveWorks Alternators and Starters. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these DriveWorks Alternators and Starters range up to $13.49, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
FAQs for 1992 Chevrolet Corvette Alternators and Starters
Which Alternators and Starters are best-sellers for 1992 Chevrolet Corvettes?
Out of 15 Alternators and Starters that fit 1992 Chevrolet Corvettes, the following parts are the top sellers:
- Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (89014926) – $9.99
- Multi-Use Connector (12443337) – $20.99
- New Voltage Regulator (12450583) – $48.99
What’s the price range for 1992 Chevrolet Corvette Alternators and Starters?
Alternators and Starter prices for the 1992 Chevrolet Corvette start at $9.99 and go up to $284.99 for the most premium parts.
What’s the average price of a Alternators and Starter for a 1992 Chevrolet Corvette?
The average price for Alternators and Starters for the 1992 Chevrolet Corvette is $72.41. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Chevrolet Corvette model years?
What are the cheapest Alternators and Starters for my 1992 Chevrolet Corvette?
The cheapest 1992 Chevrolet Corvette Alternators and Starters we carry in stock are:
- Offset Starter Alignment Shim, (1) 1/64, (1) 3/64, (1) 1/16 In., GM (89014926) – $9.99
- Ball Bearing (5050642) – $13.49
- Multi-Use Connector (12459561) – $19.99
- Multi-Use Connector (12443337) – $20.99
- Ignition Lock Cylinder Assembly (50210552) – $47.99
What are the top-rated Alternators and Starters that fit the 1992 Chevrolet Corvette?
Out of 30 reviews by customers, our 1992 Chevrolet Corvette Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1992 Chevrolet Corvette and their top-rated products:
- Alternator Parts
- Ball Bearing (5050642) – $13.49
- Ignition Lock Parts
- Ball Bearing (5050642) – $13.49
- Starter Parts
- Ball Bearing (5050642) – $13.49
What types of Alternators and Starters do you sell for my 1992 Chevrolet Corvette?
As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1992 Chevrolet Corvette:
Can I get help with 1992 Chevrolet Corvette Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Alternators and Starters and more.
What is your return policy for Chevrolet Corvette Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
