2013 Chevrolet Corvette Alternators and Starters
Find Your Specific 2013 Chevrolet Corvette Alternators and Starters
Below you will find various in-demand Chevrolet Alternators and Starters, components and accessories for your 2013 Corvette. Advance Auto Parts has popular Corvette parts like Alternator Parts, Alternator Pulley Parts, Starter Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Corvette model years including
2012,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2013 Chevrolet Corvette Alternators and Starters below and start saving instantly.
Popular 2013 Chevrolet Corvette Alternators and Starters Categories
Essential Alternators and Starters for 2013 Chevrolet Corvettes
Mr. Gasket – Alternator (Part No.5122)
from
$288.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability. This 10SI style 80 amp alternator can be used as an original equipment replacement OR as a 1-wire alternator.
Product Features:
See More
Product Features:
- Fits Most 1973-1983 GM Vehicles
- Bolt Spacing 6.6″
- 80 Amps
- GM 10SI Style Alternator
- Chrome Plated Finish
- 1-Groove V-belt pulley – included
- Internal Regulator
Carquest Premium – Alternator: Remanufactured, 110 Amps (Part No.13864A)
from
$225.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Bosch – Alternator: Remanufactured, 150 Amps (Part No.AL8867X)
from
$256.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Carquest Premium – Alternator: Remanufactured, 150 Amps (Part No.11794A)
from
$532.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Standard – Alternator 7127-3AV: Remanufactured, 63 Amps (Part No.7127-3AV)
from
$77.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
WAI – Alternator: New, 120 Amps (Part No.7901-2N-5G)
from
$284.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
See More
Valeo – Alternator, New (Part No.F4000582821VAL)
from
$584.49
Valeo manufactures a 100% New Alternator that is a direct fit OEM quality replacement.
Product Features:
See More
Product Features:
- OEM-Quality Direct Fit Application.
- 100% new quality components.
- Fully tested to meet OE specifications.
- Utilizes the latest OE technology.
- Provides exceptional reliability.
Dorman – Help – Starter Mounting Bolt, Type 1 Long (Part No.72004)
from
$5.29
This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920112A)
from
$61.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This replacement alternator pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part. Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD? type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD? is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Patented Original Equipment Design. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
Product Features:
See More
Product Features:
- Designed and engineered by Litens Automotive. The inventor of the OAD? (Overrunning Alternator Decoupler)
- Protects the alternator and other front-end accessory drive components
- 17mm Hex tool included in kit to assist in removal and installation
- New cap included with the OAD (Always ensure the cap is installed after installation)
- Installation instructions included
Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920667A)
from
$147.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This replacement alternator pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part. Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD? type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD? is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Patented Original Equipment Design. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
Product Features:
See More
Product Features:
- Designed and engineered by Litens Automotive. The inventor of the OAD? (Overrunning Alternator Decoupler)
- Protects the alternator and other front-end accessory drive components
- 17mm Spline tool included in kit to assist in removal and installation
- New cap included with the OAD (Always ensure the cap is installed after installation)
- Installation instructions included
- Professional mechanics can install this replacement OAD in approximately 1/ 2 hour. During alternator replacement, belts, tensioners, and routing pulleys should be inspected.
- 66.7mm O.D.; 17mm I.D; 51mm width; ribbed running surface for a 6-rib serpentine belt; high-grade steel construction. 17mm Spline bit driver Included for ease of installation.
Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920746A)
from
$191.99
Litens Automotive is the original equipment supplier to G.M. for this Corvette decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 50,000 – 60,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920030A)
from
$128.99
Litens Automotive is the original equipment supplier for the 2014-2018 Chevrolet Corvette, Silverado,Tahoe, Suburban / GMC Yukon, Sierra with 4.3/5.3/6.2L . This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
Product Features:
See More
Product Features:
- Designed and engineered by Litens Automotive. The inventor of the “OAD” (overrunning alternator decoupler).
- Patented original equipment design
- Protects the alternator and other front-end accessory drive components
- New cap included with the OAD
- Installation instructions included
ACDelco – GM Original Equipment Starter, Remanufactured (Part No.F5000411032ACD)
from
$598.66
ACDelco GM Original Equipment Light Duty Remanufactured Starters are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. Remanufacturing Starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These original equipment starters are engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Contain 100% new copper and bronze sintered, oil-impregnated bushings
- Solenoid contacts are 100% new with copper terminals and plated hardware
- Remanufactured to meet or exceed original equipment specifications and are 100% performance-tested
- Components are tested to meet original specification requirements, for remarkable durability
GM Genuine Parts – Starter (Part No.323-1640)
from
$489.99
GM Genuine Parts Remanufactured Starter Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Remanufacturing starter motors is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
WAI – 1.5Kw/12 Volt, CW, 9-Tooth Pinion (Part No.3686N)
from
$132.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Carquest Standard – Starter Remanufactured Standard (Part No.3510MSV)
from
$62.99
Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.17579S)
from
$171.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured (Part No.6482S)
from
$181.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
WAI – 1.4kW/12 Volt, CW, 11-Tooth Pinion (Part No.6941N)
from
$207.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Carquest Premium – Starter Remanufactured Premium (Part No.3689S)
from
$96.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.3631S)
from
$88.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
ACDelco – GM Original Equipment Starter, Remanufactured (Part No.F5000350708ACD)
from
$543.43
ACDelco GM Original Equipment Light Duty Remanufactured Starters are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. Remanufacturing Starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These original equipment starters are engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Contain 100% new copper and bronze sintered, oil-impregnated bushings
- Solenoid contacts are 100% new with copper terminals and plated hardware
- Remanufactured to meet or exceed original equipment specifications and are 100% performance-tested
- Components are tested to meet original specification requirements, for remarkable durability
Carquest Professional – Starter-New (Part No.3510MSN)
from
$111.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10491
GM Genuine Parts – Starter (Part No.323-1625)
from
$474.99
GM Genuine Parts Remanufactured Starter Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Remanufacturing starter motors is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
Carquest Premium – Starter Remanufactured (Part No.6941S)
from
$164.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
ACDelco – Professional Starter, Remanufactured (Part No.F5000583430ACD)
from
$247.94
ACDelco’s Professional Remanufactured Starters are the ideal high quality replacement for many vehicles on the road today. ACDelco’s Professional Remanufactured Starters have 100% new copper and bronze sintered, oil-impregnated bushings, plus the solenoid contacts are 100% new with copper terminals and plated hardware. Remanufacturing starters is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These premium aftermarket reman starters are manufactured to fit a wide range of vehicles and will provide the same performance, durability, and service life you expect from ACDelco.
Product Features:
See More
Product Features:
- Remanufactured using consistent quality processes; not just rebuilt
- Starters have 100% new copper and bronze sintered and oil-impregnated armature bushings
- Solenoid contacts are 100% NEW with copper terminals and plated hardware
- Performance-tested and inspected to ensure they meet ACDelco quality design and component specifications
GM Genuine Parts – Starter (Part No.323-255)
from
$128.99
GM Genuine Parts Remanufactured Starter Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Remanufacturing starter motors is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
Bosch – Professional Preferred Starter, New (Part No.F5000162477BOS)
from
$361.26
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.
Product Features:
See More
Product Features:
- Built with original equipment quality components to withstand excessive heat and high electrical demand
- Identical in fit and performance to the OE parts they replace
- The perfect solution for certain problematic late-model applications that place an extreme burden on unit components in a high-heat environment
- 100% full-load tested for proven starting/charging performance
- Lifetime warranty
Upgrade your 2013 Chevrolet Corvette with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 2013 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Alternators and Starters are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Alternators and Starters for the 2013 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Alternator Part
replacements to
Alternator Pulley Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 2013 Chevrolet Corvette at great prices.
Our Alternators and Starters inventory for this model
ranges from just $5.29 to $678.94, with
an average price of $344.06.
Our 14 Alternators and Starters in stock come from 8 trusted brands, so you’re sure to find the right part for your 2013 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2013 Chevrolet Corvette, we stock popular OEM and aftermarket Alternators and Starters from top names
like Carquest Premium, and more.
Carquest Premium Alternators and Starters
start at just $164.99 and boast an impressive 4 stars average rating from customers.
With 51 customer reviews and counting, our 2013 Chevrolet Corvette Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2013 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 2013 Chevrolet Corvette!
Best-Selling Alternator Parts for 2013 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 8 quality Alternator Part components, starting at $226.99.
Carquest Premium – Alternator: Remanufactured, 145 Amps (Part No.13969CPA)
from
$226.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Bosch – Alternator: Remanufactured, 145 Amps (Part No.AL8800X)
from
$391.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Bosch – Alternator (Part No.F40001332313BOS)
from
$509.04
Alternator
Valeo – Alternator, New (Part No.F4000349503VAL)
from
$678.94
Valeo manufactures a 100% New Alternator that is a direct fit OEM quality replacement.
Product Features:
See More
Product Features:
- OEM-Quality Direct Fit Application.
- 100% new quality components.
- Fully tested to meet OE specifications.
- Utilizes the latest OE technology.
- Provides exceptional reliability.
GM Genuine Parts – Alternator: New, 145 Amps (Part No.25888970)
from
$658.99
GM Genuine Parts Alternators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These alternators provide power to the vehicle’s electrical systems and charge the battery while the engine is running. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Newly manufactured as an exact replacement for your GM vehicle’s original alternator
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
WAI – Alternator: New, 145 Amps (Part No.13969N)
from
$427.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
See More
Carquest Premium – Alternator: Remanufactured, 150 Amps (Part No.11465A)
from
$359.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Alternator: Remanufactured, 145 Amps (Part No.13969A)
from
$273.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Most Popular 2013 Chevrolet Corvette Alternator Pulley Parts
Customize your Chevrolet with 1 Alternator Pulley Parts products
like Alternator Decoupler Pulleys, all
priced under $191.99.
Litens – Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (Part No.920746A)
from
$191.99
Litens Automotive is the original equipment supplier to G.M. for this Corvette decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Decoupling pulleys are engine specific and should never be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 50,000 – 60,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Top Picks for 2013 Chevrolet Corvette Starter Parts
Upgrade Chevrolet Corvettes with top-quality Starter Parts parts, including 5 OEM and aftermarket selections for your 2013 model.
Carquest Premium – Starter Remanufactured (Part No.6941S)
from
$164.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Each unit is triple-tested to ensure quality and performance
- All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
- Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
Dorman – Help – Starter Mounting Bolt, Type 1 Long (Part No.72004)
from
$5.29
This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Starter (Part No.323-1640)
from
$489.99
GM Genuine Parts Remanufactured Starter Motors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Remanufacturing starter motors is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to GM specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
- Tested to ensure they perform to GM specifications
WAI – 1.4kW/12 Volt, CW, 11-Tooth Pinion (Part No.6941N)
from
$207.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Carquest Professional – Starter-New (Part No.6941SN)
from
$199.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10567
Top-Rated Alternators and Starters Brands For Your 2013 Chevrolet Corvette
Shop for the best-rated brands offering Alternators and Starters and other products for your 2013 Chevrolet Corvettes. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium, and more. Alternators and Starters from these brands that fit a 2013 Corvette start at just $164.99 and are rated as high as 4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 2013 Chevrolet Corvette Alternators and Starters
When it comes to maintaining or upgrading your 2013 Chevrolet Corvette, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 2013 Chevrolet Corvette. With over 4 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $164.99, with an average price of just $256.49. Plus, with over 12 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2013 Chevrolet Corvette Alternators and Starters
Which Alternators and Starters are best-sellers for 2013 Chevrolet Corvettes?
Out of 14 Alternators and Starters that fit 2013 Chevrolet Corvettes, the following parts are the top sellers:
- Alternator: Remanufactured, 145 Amps (20851510) – $391.99
- Starter Mounting Bolt, Type 1 Long (11839849) – $5.29
- Starter (11885594) – $489.99
What’s the price range for 2013 Chevrolet Corvette Alternators and Starters?
Alternators and Starter prices for the 2013 Chevrolet Corvette start at $5.29 and go up to $678.94 for the most premium parts.
What’s the average price of a Alternators and Starter for a 2013 Chevrolet Corvette?
The average price for Alternators and Starters for the 2013 Chevrolet Corvette is $344.06. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Chevrolet Corvette model years?
What are the cheapest Alternators and Starters for my 2013 Chevrolet Corvette?
The cheapest 2013 Chevrolet Corvette Alternators and Starters we carry in stock are:
- Starter Mounting Bolt, Type 1 Long (11839849) – $5.29
- Starter Remanufactured (10453844) – $164.99
- Overrunning Alternator Decoupling (OAD) Pulley – Original Equipment Quality (10150699) – $191.99
- Starter-New (12517840) – $199.99
- 1.4kW/12 Volt, CW, 11-Tooth Pinion (12157623) – $207.99
What are the top-rated Alternators and Starters that fit the 2013 Chevrolet Corvette?
Out of 51 reviews by customers, our 2013 Chevrolet Corvette Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 2013 Chevrolet Corvette and their top-rated products:
- Starter Parts
- Starter Remanufactured (10453844) – $164.99
- Alternator Parts
- Starter Remanufactured (10453844) – $164.99
What types of Alternators and Starters do you sell for my 2013 Chevrolet Corvette?
As of 2/5/25, these are some of the most in-demand types of Alternators and Starters for a 2013 Chevrolet Corvette:
Can I get help with 2013 Chevrolet Corvette Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Alternators and Starters and more.
What is your return policy for Chevrolet Corvette Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
