1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts
More 1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts
Find your specific 1992 Chevrolet Commercial Chassis original or aftermarket Throttle Bodies & Carb Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts
NTK – Throttle Position Sensor (Part No.TH0033)
from
$41.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
- The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
Dorman – Throttle Body Position Sensor (Part No.C7012175635DOR)
from
$55.00
At last, make major improvements with a minimal amount of time, money, and energy. Dorman’s Throttle Position Sensor, attaches easily to the throttle body.
Product Features:
See More
Product Features:
- Includes all necessary hardware for a complete repair
- This part has undergone a rigorous inspection to ensure high quality
- Direct replacement for a proper fit every time
- Trouble-free installation
Vemo – Throttle Position Sensor (Part No.C7012175635VMO)
from
$25.35
The Vemo Throttle Position Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Throttle Position Sensor (Part No.ECC1039)
from
$39.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Throttle Position Sensor (Part No.C7012207692DEL)
from
$57.76
Delphi Digital Speed and Position Sensors are based on integrated adaptive threshold Hall effect technology. They sense the speed and position of a target created with various sense features that are machined, stamped, drawn, or magnetically encoded. They can sense speeds as low as zero RPM. Delphi Speed and Position Sensors feature silicon Hall sense elements. The sensor assembly uses proven design features and assembly processes to provide a reliable solution in demanding automotive environments. The sensor design is modular to enable re-use of proven components and to provide low risk package modifications for new applications. They utilize an adaptive threshold control scheme providing robust performance that improves the air gap capability and reduces the placement accuracy requirements between the sensor and the target. Delphi also offers designs that help protect the sensor from transients and from electromagnetic interference (EMI). Power can be provided by either battery or regulated voltage supplies, enabling even more controller flexibility. Delphi’s Digital Speed and Position Sensors can operate on conditioned voltage from 4.5 to 16 volts.
Product Features:
See More
Product Features:
- Modular design based on proven features and assembly processes provides rapid application optimization with flexible package geometry and high reliability
- Three-wire open collector output, open drain output, or two-wire current output allow flexible controller design
- Accurate square wave output eliminates square-up function in the controller
- Transient protection helps protect against stray electro-magnetic fields interface
- Various mounting applications provide choice of many existing designs, or custom designs
- Adaptive Hall signal schemes provide improved timing accuracy, optimized sensor air gap and tilt sensitivity, and zero speed sensing capability
- Single element option offers simplified design, and valid power on state (VPOS) for camshaft applications to minimize engine synchronization timing
- Dual element differential option offers extremely accurate gear edge detection, peak detector circuitry that is immune to tilt or off-center failure mode, and gain-adjust circuitry that reduces the effect of minor gear anomalies
- Enhanced sensing capability helps reduce emissions and improve reliability and drivability
Carquest Premium – Throttle Position Sensor (Part No.ECC1009)
from
$38.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
- 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)
from
$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts Categories
1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts
Maybe you’re in the middle of a full rebuild of that 1992 Chevrolet Commercial Chassis. Maybe you just need a couple of Throttle Bodies & Carb Parts. Either way, Advance Auto Parts has 5 different Throttle Bodies & Carb Parts in our inventory ranging from $9.49 to $55.00. That means you can find the exact parts or products you need to keep that 1992 Chevrolet Commercial Chassis running smoothly.
Throttle Bodies & Carb Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Chevrolet Commercial Chassis. Felpro, Carquest Premium, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Throttle Bodies & Carb Parts for your 1992 Chevrolet Commercial Chassis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Throttle Bodies & Carb Parts to keep your 1992 Chevrolet Commercial Chassis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Throttle Bodies & Carb Parts Brands To Make Your 1992 Chevrolet Commercial Chassis Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Chevrolet Commercial Chassis demands trusted brand parts and products to keep it running. Many trusted brands of Throttle Bodies & Carb Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Commercial Chassis the best it can be. Be sure to browse some of our top Throttle Bodies & Carb Parts brands and parts.
Popular Felpro Throttle Bodies & Carb Parts
We carry Felpro parts in our stock across Throttle Body Mounting Gaskets categories, plus more. For a 1992 Chevrolet Commercial Chassis, our most popular Felpro Throttle Bodies & Carb Parts include:
FAQs for 1992 Chevrolet Commercial Chassis Throttle Bodies & Carb Parts
What are the most purchased Throttle Bodies & Carb Parts for the 1992 Chevrolet Commercial Chassis?
Out of 5 Throttle Bodies & Carb Parts for the 1992 Chevrolet Commercial Chassis, the most popular in our inventory are:
