1992 Cadillac Brougham Valve Cover and Cylinder Heads
More 1992 Cadillac Brougham Valve Cover and Cylinder Heads
Find your specific 1992 Cadillac Brougham original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1992 Cadillac Brougham Valve Cover and Cylinder Heads
Felpro – Cylinder Head Gasket Set (Part No.HS 8510 PT-4)
from
$91.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)
from
$249.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 Psi Tensile Strength
- High Performance Head Bolts Are Stronger
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8510 PT)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – MLS Head Gasket (Part No.3128G)
from
$99.99
Manufactured from nitrile coated spring steel layers. Stress formed embossment provides excellent sealing. Also provides stability and reduces cylinder bore distortion. Ideal for super charged, turbo charged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track. Packaged individually.
Product Features:
See More
Product Features:
- Maximum sealing
- Reduced bore distortion
- Uniform bolt load distribution
- Excellent radial strength
Spartan – Engine Cylinder Head; Olds 307 85-90 Cyl Head (Part No.2O15)
from
$368.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Edelbrock – RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam (Part No.60899)
from
$1192.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 64cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Dorman – Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm (sold by each) (Part No.693-005)
from
$2.99
Our Engine Rocker Arm Bolts are manufactured with a high corrosion resistance for an extended service life. Long-lasting durability is ensured.
Product Features:
See More
Product Features:
- Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm
- Rocker Arm Stud, Type 3, 3/8-24 x 2-1/2 In. (.003 In. Oversize), Gm (sold by each)
- Our Engine Rocker Arm Bolts are manufactured with a high corrosion resistance for an extended service life. Long-lasting durability is ensured.
- High-quality steel construction
- Resistant to rust
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Kit (Part No.R-882)
from
$8.29
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 2 Arms
- 2 Pivots
- 1 Pivot bridge
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-973)
from
$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Push Rod (Part No.RP-3262)
from
$2.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Dorman – Pipe Plug C.S. Square 1/4-18 Npt, Head Size 1/4 In. (sold by each) (Part No.090-067)
from
$4.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ACDelco – Ignition Knock (Detonation) Sensor (Part No.213-324)
from
$48.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Sealed Power – Engine Valve Lifter (Part No.HT-2104)
from
$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2148A)
from
$24.79
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
- New OEM riveted pin retaining design
Sealed Power – Engine Valve Lifter (Part No.HT-817)
from
$13.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Exhaust Valve (Part No.V-1904)
from
$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Intake Valve (Part No.V-1926)
from
$4.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)
from
$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Valve Spring (Part No.VS-677)
from
$2.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5823)
from
$152.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Popular 1992 Cadillac Brougham Valve Cover and Cylinder Heads Categories
1992 Cadillac Brougham Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1992 Cadillac Brougham. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 25 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,192.99. That means you can find the exact parts or products you need to keep that 1992 Cadillac Brougham running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1992 Cadillac Brougham. Felpro, Sealed Power, and AC Delco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1992 Cadillac Brougham, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 126 reviews in this category, some of the top rated parts include Engine Valve Spring with 5.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1992 Cadillac Brougham rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1992 Cadillac Brougham Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1992 Cadillac Brougham demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Brougham the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Sealed Power Valve Cover and Cylinder Heads
We carry Sealed Power parts in our stock across Rocker Arm Nuts and Push Rods categories, plus more. For a 1992 Cadillac Brougham, our most popular Sealed Power Valve Cover and Cylinder Heads include:
Top 1992 Cadillac Brougham Valve Cover and Cylinder Heads from Felpro
Felpro products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1992 Cadillac Brougham. Popular Felpro parts include:
FAQs for 1992 Cadillac Brougham Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1992 Cadillac Brougham?
Out of 25 Valve Cover and Cylinder Heads for the 1992 Cadillac Brougham, the most popular in our inventory are:
from
$41.99
This product is not rated
Cylinder Head Gasket: Composite, Without Head Bolts
Cylinder Head Gaskets
What are the top-rated 1992 Cadillac Brougham Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1992 Cadillac Brougham based on customer reviews/ratings are:
