1992 BMW 318is Suspension Parts
More 1992 BMW 318is Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1992 BMW 318is, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1992 BMW 318is Suspension Parts
Lemfoerder – OE Replacement Suspension Wishbone (Part No.L200026835LEM)
from
$138.97
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- Manufactured using high quality OE materials.
- Includes factory specified hardware.
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457510BIL)
from
$184.16
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
KYB – Jounce Bumper and Bellows (Part No.SB114)
from
$29.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Bilstein – B6 Performance – Shock Absorber (Part No.L4000396327BIL)
from
$164.27
Bilstein B6 Performance gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- Improved safety and sportiness
- Added traction and enhanced stability
- Increased durability and performance while maintaining ride comfort
- Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.
Whiteline – Brace Strut Tower (Part No.KSB536)
from
$180.99
You can never have too much chassis stiffness. Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly and you can feel the difference through improved turn-in, sharper steering response along with greater steering feedback.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Hand picked Whiteline bushings and/or alignment, geometry products best suiting your vehicle.
Rare Parts – Control Arm Bushing (Part No.RP19384)
from
$46.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Whiteline – Trailing Arm Lower Front Bushing (Part No.W61923)
from
$69.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
APA/URO Parts – Strut Bump Stop (Part No.L303677948APA)
from
$11.79
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
Lemfoerder – Lemfoerder Coil Spring Shim (Part No.L500777947LEM)
from
$5.27
The Lemfoerder Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Rein – Spring Pad (Part No.AVP0198P)
from
$6.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
See More
Elring – Shock / Strut Paper Mount Gasket (Part No.L4017263905ELR)
from
$2.06
The Elring Shock / Strut Paper Mount Gasket is OE Quality and is manufactured using only the highest quality materials.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets or exceeds OEM specifications
Corteco – Corteco Shock Mount (Part No.L401051096CFW)
from
$22.80
The Corteco Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Monroe – Strut-Mate Strut Boot Kit (Part No.63638)
from
$28.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Rare Parts – Strut Mount (Part No.RP17486)
from
$131.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
Lemfoerder – Strut Mount (Part No.L3030296056LEM)
from
$62.19
The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Pivot for the steering mechanism, providing a smooth steering response
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Whiteline – Spring Pad Lower Bushing (Part No.W72045)
from
$40.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Whiteline – Spring Pad Lower Bushing (Part No.W72044)
from
$40.99
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle common to 4×4 or looking to obtain that preferred ride height setting Whiteline spring pads are an economical solution.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
MTC – Trailing Arm Bolt (Part No.L2038444008MTC)
from
$7.37
Trailing Arm Bolt
Rare Parts – Strut Mount (Part No.RP17190)
from
$59.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
Monroe – Strut-Mate Shock Mounting Kit (Part No.901965)
from
$31.49
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Royal Purple – POWER STEERING FLUID (Part No.01326)
from
$6.29
POWER STEERING FLUID
Vaico – Nut (Part No.Y2002336709VCO)
from
$3.04
Nut
Monroe – SHOCK-MATE Shock Absorber Boot Kit (Part No.L40301162991MNR)
from
$14.86
Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots used to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
Febi – Strut Bellows / Dust Boot (Part No.L3037127539FEB)
from
$7.19
The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Manufactured with design and quality that matches or exceeds OE quality
- Resistant to oil and other contaminants
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Strut Bellows (Part No.K90460)
from
$34.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
KYB – Jounce Bumper and Bellows (Part No.SB105)
from
$30.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Popular 1992 BMW 318is Suspension Parts Categories
1992 BMW 318is Suspension Parts
You count on your 1992 BMW 318is to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 103 Suspension Parts ranging in price from $2.06 to $269.72, you’re sure to find everything you need for your 1992 BMW 318is.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 27 different brands like Moog, KYB, and Dorman. 1992 BMW 318is Suspension Parts start as low as $2.06!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 79 extensive product reviews on 1992 BMW 318is Suspension Parts. Some of the top-rated Suspension Parts products we carry are Control Arm Bushing with 4.3 stars and OESpectrum Passenger Car Shock Absorber with 4.5 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1992 BMW 318is below to get started!
Top-Rated Suspension Parts Brands For Your 1992 BMW 318is
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1992 BMW 318is running right for years to come. In our inventory you’ll find brands like Moog, KYB, Dorman, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Air Suspension and Kits and Shocks and Struts. All are waiting to get your 1992 BMW 318is back on the road. Some of the top-rated Monroe products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1992 BMW 318is, and some of our most reviewed Monroe parts include:
FAQs for 1992 BMW 318is Suspension Parts
What are the most purchased Suspension Parts for the 1992 BMW 318is?
Out of 103 Suspension Parts for the 1992 BMW 318is, the most popular in our inventory are:
What are the top-rated 1992 BMW 318is Suspension Parts?
Top-rated Suspension Parts for your 1992 BMW 318is based on customer reviews/ratings are:
from
$77.99
(2)
OESpectrum Passenger Car Shock Absorber
“I install this item to my 1992 B M W and find it very easy to install and so far it good, no problem”
from
$61.99
(1)
High Pressure Monotube Gas Shock
“I have purchased KYB shocks before and have liked the upgrade from stock. The shocks give a good ride without being too soft they also are stiff enoug”
