1992 BMW 318is Steering and Chassis Parts

Essential Steering and Chassis Parts for 1992 BMW 318is

Driveworks – Tie Rod-Inner (Part No.DW-EV331)

Tie Rod-Inner

from

$11.99
Tie Rod-Inner

Powercraft – Pump Seal Kit (Part No.8841)

Pump Seal Kit

from

$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.W81924)

Control Arm Lower Inner Rear Bushing

from

$70.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

Whiteline – Sway Bar 27Mm Heavy Duty Blade Adjustable (Part No.BBF39Z)

Sway Bar 27Mm Heavy Duty Blade Adjustable

from

$352.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 27mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

APA/URO Parts – APA/URO Steering Rack Boot Clamp (Part No.M101178016APA)

APA/URO Steering Rack Boot Clamp

from

$3.73
The APA/URO Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Lemfoerder – Sway Bar Bushing (Part No.L1050237502LEM)

Sway Bar Bushing

from

$4.28
The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MTC – MTC Tie Rod Lock Plate (Part No.M300550079MTC)

MTC Tie Rod Lock Plate

from

$2.44
The MTC Tie Rod Lock Plate is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Rare Parts – Sway Bar Link (Part No.RP18255)

Sway Bar Link

from

$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201396)

Stabilizer Bar Bushing Kit

from

$13.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202077889LEM)

OE Replacement Ball Joint

from

$38.54
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Corteco – Subframe Mount (Part No.L1005743822CFW)

Subframe Mount

from

$44.87
The Corteco Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Dorman – Upper Steering Shaft (Part No.425-759)

Upper Steering Shaft

from

$338.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Rein – Power Steering Reservoir (Part No.PSR0027)

Power Steering Reservoir

from

$24.99
Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Carquest Premium – 1/2" I.D. Reservoir Hose (Part No.36209)

1/2" I.D. Reservoir Hose

from

$43.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Dorman – Driveshaft Coupler (Part No.K1006683742DOR)

Driveshaft Coupler

from

$83.66
Driveshaft Coupler

Rein – Power Steering Rack Boot (Part No.BKP0063R)

Power Steering Rack Boot

from

$10.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80532)

Control Arm and Ball Joint Assembly

from

$134.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Cardone – Remanufactured Power Steering Pump (Part No.21-231)

Remanufactured Power Steering Pump

from

$202.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8866)

Rack Pinion Seal Kit

from

$115.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Tie Rod End (Part No.RP25733)

Tie Rod End

from

$105.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1821)

Remanufactured Rack and Pinion Assembly

from

$255.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

Power Steering Reservoir Cap

from

$12.60
Power Steering Reservoir Cap

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300029959LEM)

Lemfoerder Tie Rod Assembly

from

$89.37
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo (Part No.39943)

Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo

from

$75.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Upgrade your 1992 BMW 318is with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1992 BMW 318is, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 318is functioning at its best. At Advance Auto Parts, we offer a wide selection of 99 Steering and Chassis Parts for the 1992 BMW 318is, designed to meet your needs without breaking the bank. From Sway Bar replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1992 BMW 318is at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.44 to $615.99, with an average price of $71.30. Our 99 Steering and Chassis Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 1992 BMW 318is without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 BMW 318is, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 68 customer reviews and counting, our 1992 BMW 318is Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 BMW 318is is always ready to roll. We’re committed to providing you with everything you need to keep your 318is in top shape, all in one place. Start shopping confidently below for your 1992 BMW 318is!

Best-Selling Sway Bars for 1992 BMW 318is

Enhance the driving experience in your BMW with 25 quality Sway Bar components, starting at $3.60.

Karlyn – Sway Bar Link (Part No.L103035527KAR)

Sway Bar Link

from

$22.60
The Karlyn Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K90511)

Sway Bar Link Kit

from

$22.49
Sway Bar Link Kit

MOOG – Stabilizer Bar Bushing Kit (Part No.K201396)

Stabilizer Bar Bushing Kit

from

$13.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Beck/Arnley – Stabilizer End Link (Part No.101-4947)

Stabilizer End Link

from

$46.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Comes with necessary components and hardware for a complete installation
  • Hardware functionality matches original design requirements
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Application specific for this vehicle
See More

MOOG – Suspension Stabilizer Bar Link (Part No.K90511)

Suspension Stabilizer Bar Link

from

$32.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Rein – Sway Bar Link (Part No.SCL0008R)

Sway Bar Link

from

$18.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

International Suspension Group – Sway Bar Bushing (Part No.L1050138255ISG)

Sway Bar Bushing

from

$3.60
Sway Bar Bushing

Whiteline – Sway Bar Vehicle Kit (Part No.BBK001)

Sway Bar Vehicle Kit

from

$615.99
Engineered to ‘Activate More Grip’, BBK001 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mm 3 point adjustable front sway bar and 22mm 2 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Whiteline – Sway Bar 27Mm Heavy Duty Blade Adjustable (Part No.BBF39Z)

Sway Bar 27Mm Heavy Duty Blade Adjustable

from

$352.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 27mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Whiteline – Sway Bar 22Mm Heavy Duty Blade Adjustable (Part No.BBR38Z)

Sway Bar 22Mm Heavy Duty Blade Adjustable

from

$294.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Rare Parts – Sway Bar Link (Part No.RP17256)

Sway Bar Link

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Fr Bush (Part No.RP16399)

Sway Bar Fr Bush

from

$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Rare Parts – Sway Bar Link (Part No.RP18255)

Sway Bar Link

from

$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Lemfoerder – Sway Bar Link (Part No.L103035527LEM)

Sway Bar Link

from

$33.71
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Whiteline – Sway Bar Mount Bushing (Part No.W22801)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W22642)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 22.5mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Lemfoerder – Sway Bar Link (Part No.L1030655866LEM)

Sway Bar Link

from

$23.86
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Autopart International Inc – Sway Bar Link (Part No.L10302053534API)

Sway Bar Link

from

$18.10
Sway Bar Link

Febi – Sway Bar Bushing (Part No.L1050271865FEB)

Sway Bar Bushing

from

$12.39
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Autopart International Inc – Sway Bar Bushing Kit (Part No.L10491946430API)

Sway Bar Bushing Kit

from

$12.22
Sway Bar Bushing Kit

MOOG – Stabilizer Bar Bushing Kit (Part No.K201395)

Stabilizer Bar Bushing Kit

from

$10.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Vaico – Sway Bar Bushing (Part No.L105077958VCO)

Sway Bar Bushing

from

$9.41
Sway Bar Bushing

AST – Polyurethane Sway Bar Bushing (Part No.L1050948166AST)

Polyurethane Sway Bar Bushing

from

$9.15
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

International Suspension Group – Sway Bar Bushing (Part No.L105077972ISG)

Sway Bar Bushing

from

$4.52
Sway Bar Bushing

Lemfoerder – Sway Bar Bushing (Part No.L1050237502LEM)

Sway Bar Bushing

from

$4.28
The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Most Popular 1992 BMW 318is Tie Rods

Customize your BMW with 16 Tie Rods products like Tie Rod Ends, Center Tie Rod Ends, and Tie Rod Assemblies, all priced under $105.99.

Driveworks – Tie Rod-Inner (Part No.DW-EV331)

Tie Rod-Inner

from

$11.99
Tie Rod-Inner

Beck/Arnley – Outer Tie Rod End (Part No.101-4940)

Outer Tie Rod End

from

$41.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Ball joint is pre-greased
  • Easy access wrench flat allows for the use of a socket for easy installation and removal
  • Full ball stud
See More

Rare Parts – Tie Rod End (Part No.RP25733)

Tie Rod End

from

$105.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300029959LEM)

Lemfoerder Tie Rod Assembly

from

$89.37
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300029958LEM)

Lemfoerder Tie Rod Assembly

from

$84.63
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:
  • Original Equipment Manufacturer
  • High grade synthetic socket materials
  • Outstanding slide properties
  • High ball stud articulation angles.
See More

Febi – Tie Rod Assembly (Part No.M3000655718FEB)

Tie Rod Assembly

from

$80.41
Tie Rod Assembly

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301029961LEM)

ZF/Lemfoerder Tie Rod End

from

$65.72
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301029960LEM)

ZF/Lemfoerder Tie Rod End

from

$65.70
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rare Parts – Tie Rod End (Part No.RP27751)

Tie Rod End

from

$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

TRW – TRW Tie Rod End (Part No.M301019407TRW)

TRW Tie Rod End

from

$50.70
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

International Suspension Group – Tie Rod Assembly (Part No.M300029959ISG)

Tie Rod Assembly

from

$41.25
Tie Rod Assembly

Dorman – Steering Tie Rod End (Part No.531-022)

Steering Tie Rod End

from

$28.99
This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.

Product Features:
  • Trustworthy replacement – this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications.
  • Durably designed – factory-sealed and precision-forged housing resists future corrosion.
  • Reliably engineered – built to decrease wear rate and ensure overall strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Autopart International Inc – Tie Rod End (Part No.M30101909489API)

Tie Rod End

from

$25.04
Tie Rod End

Autopart International Inc – Tie Rod End (Part No.M30101995916API)

Tie Rod End

from

$24.75
Tie Rod End

APA/URO Parts – Tie Rod Lock Plate (Part No.M3005280311APA)

Tie Rod Lock Plate

from

$11.48
Tie Rod Lock Plate

MTC – MTC Tie Rod Lock Plate (Part No.M300550079MTC)

MTC Tie Rod Lock Plate

from

$2.44
The MTC Tie Rod Lock Plate is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top Picks for 1992 BMW 318is Ball Joints

Upgrade BMW 318is with top-quality Ball Joints parts, including 12 OEM and aftermarket selections for your 1992 model.

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80532)

Control Arm and Ball Joint Assembly

from

$134.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

International Suspension Group – Ball Joint (Part No.L202056901ISG)

Ball Joint

from

$17.02
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80531)

Control Arm and Ball Joint Assembly

from

$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Meyle – Ball Joint (Part No.L2020114904MEY)

Ball Joint

from

$29.49
By making a pioneering ball joint plastic socket from a highly wear-resistant polymer material developed specifically for MEYLE-HD parts. Thanks to the special, new composition of this material, Meyle has succeeded in extending ball joint life significantly. A small ball head has a small surface and consequently surface pressure is high. Excessive stress is applied to the individual components and leads to premature wear and joint failure. For this reason MEYLE-HD parts have ball pins made exactly to the size required for longer service life. Meyle engineers use professional load simulation techniques to calculate the ideal ball pin diameter. Increasing the ball head at the pin is an efficient way of increasing the part’s overall stability.

Product Features:
  • Robust steel case with black passivation (special process to reduce corrosion)
  • Precision ball pin, lubricated with MEYLE high-tech grease from marine applications and wind energy research
  • High quality rubber sleeve with blue clamping ring
  • Extra strong self-locking nut
  • Self-locking nut with microencapsulation
  • Wear-resistant plastic seat (in aviation tried and tested material)
See More

Dorman – Suspension Control Arm (Part No.520-740)

Suspension Control Arm

from

$114.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.520-739)

Suspension Control Arm

from

$109.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Rare Parts – Ball Joint (Part No.RP11071)

Ball Joint

from

$91.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020114904LEM)

OE Replacement Ball Joint

from

$41.38
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202077889LEM)

OE Replacement Ball Joint

from

$38.54
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202056901LEM)

OE Replacement Ball Joint

from

$33.09
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Delphi – Ball Joint (Part No.L202056901DEL)

Ball Joint

from

$24.21
Ball Joint

International Suspension Group – Ball Joint (Part No.L202077889ISG)

Ball Joint

from

$21.11
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

In-Demand Steering Shafts for 1992 BMW 318is

Select from 3 premium Steering Shafts parts for your 1992 BMW 318is, with prices ranging from $7.99 to $338.99.

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Dorman – Upper Steering Shaft (Part No.425-759)

Upper Steering Shaft

from

$338.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Driveworks – Camshaft Seal (Part No.S-223010)

Camshaft Seal

from

$7.99
Product Features:
  • Brand may vary by location
See More

Most Sold 1992 BMW 318is Power Steering Parts

Explore our best-selling BMW parts for the 1992 318is among 35 OEM and aftermarket options starting from $2.68.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-1822)

Remanufactured Rack and Pinion Assembly

from

$291.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:
  • Protective coating applied to each unit to extend the life of the unit (where applicable).
  • 100% performance testing to ensure perfect fit, function and reliable performance.
  • 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
  • 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
  • Valve housings have polished micro-finish sleeves for durability (where applicable).
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – 1/2" I.D. Reservoir Hose (sold by foot) (Part No.34997)

1/2" I.D. Reservoir Hose (sold by foot)

from

$8.29
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • PLEASE NOTE: Priced and sold by the foot. See store for details.
  • Rated at 275 Deg. F
  • Inner Diameter: 1/2″
See More

Dorman – Power Steering Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-906)

Power Steering Reservoir: Black, Plastic, Original Equipment Replacement

from

$54.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.

Product Features:
  • Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation.
  • Complete assembly – includes reservoir and reservoir cap.
  • Reliable performance – built to withstand excessive heat and vibration
  • Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
See More

Rein – P/S Reservoir (Part No.M2030422018RIN)

P/S Reservoir

from

$32.05
P/S Reservoir

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K9362)

Rack & Pinion Bellows Kit

from

$36.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rein – Power Steering Reservoir (Part No.PSR0027)

Power Steering Reservoir

from

$24.99
Rein Automotive OE quality power steering reservoirs, install, fit and perform the way the original manufacturer intended. These reservoirs are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Reservoir contains filter that is not-removable and reservoir must be replaced to keep power steering system functioning properly
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Rare Parts – Rack & Pinion Bellows (Part No.RP26924)

Rack & Pinion Bellows

from

$40.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Powercraft – Pump Seal Kit (Part No.8841)

Pump Seal Kit

from

$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – 1/2" I.D. Reservoir Hose (Part No.36209)

1/2" I.D. Reservoir Hose

from

$43.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Atlantic Automotive Eng – NEW RACK & PINION (Part No.3310N)

NEW RACK & PINION

from

$506.99
NEW RACK & PINION

Maval – Complete Steering Rack, Remanufactured (Part No.M100065140MAV)

Complete Steering Rack, Remanufactured

from

$495.19
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Carquest Premium – Power Steering Return Hose Assembly, 16mm Banjo x 5/8" I.D. Hose (Part No.40016)

Power Steering Return Hose Assembly, 16mm Banjo x 5/8" I.D. Hose

from

$271.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Atlantic Automotive Eng – NEW P/S PUMP (Part No.6806N)

NEW P/S PUMP

from

$226.99
NEW P/S PUMP

Cohline – Power Steering Return Line Assembly (Part No.M201638734COH)

Power Steering Return Line Assembly

from

$135.24
Since 1932, the Cohline group of companies has manufactured tube and hose line systems for the automotive sector, commercial vehicles, construction and agricultural machinery, motor industry, and other automobile suppliers.

Product Features:
  • Manufactured as a direct OE replacement
  • Pressure tested to maintain a consistent flow
  • Backed by the manufactures warranty against workmanship and material defects
See More

Powercraft – Rack Pinion Seal Kit (Part No.8866)

Rack Pinion Seal Kit

from

$115.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo (Part No.39943)

Power Steering Pressure Hose Assembly, 14mm Banjo x 14mm Banjo

from

$75.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone New – New Power Steering Reservoir (Part No.3R-501)

New Power Steering Reservoir

from

$49.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

ZF – Power Steering Reservoir (Part No.M2030422018ZF)

Power Steering Reservoir

from

$38.11
Power Steering Reservoir

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Dorman – RACK BELLOW (Part No.541-496)

RACK BELLOW

from

$23.99
RACK BELLOW

Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M101063109LEM)

Lemfoerder Steering Rack Boot

from

$19.19
The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

ZF – Power Steering Reservoir Cap (Part No.M2070442134ZF)

Power Steering Reservoir Cap

from

$12.60
Power Steering Reservoir Cap

Rein – Power Steering Rack Boot (Part No.BKP0063R)

Power Steering Rack Boot

from

$10.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More

Febi – Febi Steering Rack Boot (Part No.M101025756FEB)

Febi Steering Rack Boot

from

$9.26
The Febi Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Rein – Power Steering Rack Boot (Part No.BKP0062R)

Power Steering Rack Boot

from

$7.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

APA/URO Parts – APA/URO Steering Rack Boot Clamp (Part No.M101178016APA)

APA/URO Steering Rack Boot Clamp

from

$3.73
The APA/URO Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Febi – P/S Hose Clamp (Part No.M20362717925FEB)

P/S Hose Clamp

from

$2.68
P/S Hose Clamp

Top-Rated Steering and Chassis Parts Brands For Your 1992 BMW 318is

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1992 BMW 318is. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone, and more. Steering and Chassis Parts from these brands that fit a 1992 318is start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 1992 BMW 318is Steering and Chassis Parts

When it comes to maintaining or upgrading your 1992 BMW 318is, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 1992 BMW 318is. With over 6 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $83.57. Plus, with over 66 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Power Steering Filter
from
$48.49

(2)

Power Steering Filter

“installed on return line to power steering pump no problems with leaks”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

New Power Steering Reservoir
from
$49.99
This product is not rated

New Power Steering Reservoir

“”

FAQs for 1992 BMW 318is Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1992 BMW 318is?

Out of 99 Steering and Chassis Parts that fit 1992 BMW 318is, the following parts are the top sellers:

What’s the price range for 1992 BMW 318is Steering and Chassis Parts?

Steering and Chassis Part prices for the 1992 BMW 318is start at $2.44 and go up to $615.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1992 BMW 318is?

The average price for Steering and Chassis Parts for the 1992 BMW 318is is $71.30. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other BMW 318is model years?

Yes, we currently carry Steering and Chassis Parts for 6 model years of BMW 318is between 1991 and 1997. Steering and Chassis Parts are bought most frequently for the following model years: 1997, 1996, 1995, 1994, 1993, and 1991.

What are the cheapest Steering and Chassis Parts for my 1992 BMW 318is?

The cheapest 1992 BMW 318is Steering and Chassis Parts we carry in stock are:

What types of Steering and Chassis Parts do you sell for my 1992 BMW 318is?

Can I get help with 1992 BMW 318is Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Steering and Chassis Parts and more.

What is your return policy for BMW 318is Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new BMW 318is Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.