1991 Toyota Land Cruiser Drivetrains
More 1991 Toyota Land Cruiser Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1991 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1991 Toyota Land Cruiser Drivetrains
Yukon Gear – Landcruiser Standard Open Cross Pin Shaft (Part No.33419)
Motive Gear – Differential Gear Install Kit (Part No.TOYIK)
Yukon Gear – Ring Gear Bolt (Part No.33060)
from
$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Product Features:
See More
Product Features:
- Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
- 11mm x 1.0
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Rear Driveshaft Assembly (Part No.986-457)
from
$688.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Ball Bearing (sold by each) (Part No.110)
from
$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Toyota Landcruiser Crush Sleeve (Part No.33114)
from
$30.99
Toyota Landcruiser crush sleeve. Approx 2.220″ long.
Product Features:
See More
Product Features:
- Crush sleeve
- Fits Toyota Landcruiser
- 2.220″ tall
National – Bearings (Part No.32010-X)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
NOK – Axle Seal (Part No.K402148816NOK)
from
$7.22
NOK is Japan’s longest established oil seal manufacturer. Our functional parts such as oil seals and mechanical seals, created through advanced seal technology, are not only employed in the automotive industry but are also used in a wide range of other industries.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
INA – Differential Bearing (Part No.J7060654749INA)
from
$42.15
Differential Bearing
Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)
from
$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Toyota 7.5″, 8″ and V6
Yukon Gear – Ring Gear Bolt Kit For Toyota Landcruiser (Part No.12075)
from
$161.99
Ring gear bolt kit for Toyota Landcruiser.
Product Features:
See More
Product Features:
- Fits standard rotation Toyota Landcruiser
- Included are ring gear bolts and nuts
Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Toyota Landcruiser Reverse Rotation Front Outer Oil Slinger (Part No.33028)
Yukon Gear – Ring and Pinion Kit (Part No.24658)
from
$462.99
Ring and Pinion Kit
Driveworks – Oil Seal (Part No.S-224820)
from
$4.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 12 Hole Yoke For ’83 And Newer Toyota 8" And V6 With 27 Splines (Part No.41105)
from
$109.99
Yukon 12 hole yoke for ’83 and newer Toyota 8″ and V6 with 27 splines. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and V6
- 27 spline
- Round companion flange
NOK – Differential Seal (Part No.J7040161600NOK)
from
$19.49
Differential Seal
Yukon Gear – Toyota Landcruiser Pinion Nut, Coarse Spline (Part No.33158)
from
$15.99
Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Toyota Landcruiser with 10 spline pinion
Driveworks – Taper Bearing Cone (Part No.S-JLM-104948)
from
$13.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Bearing Race Driver (Part No.56004)
from
$99.99
Bearing race driver for Toyota front V6, Landcruiser reverse rotation, and Tacoma with locker (TOY30025). No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits 30025 race
- All steel construction
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)
from
$35.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – Landcruiser Standard Open Side Gear Thrust Washer (Part No.33400)
from
$24.99
Landcruiser standard Open side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits Toyota Landcrusier
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
USA Standard Gear – Spartan Locker For Toyota 95" Landcruiser With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17033)
from
$603.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 9.5″ Landcruiser with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)
Popular 1991 Toyota Land Cruiser Drivetrains Categories
1991 Toyota Land Cruiser Drivetrains
You count on your 1991 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 99 Drivetrains ranging in price from $1.99 to $1,356.99, you’re sure to find everything you need for your 1991 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Moog, National, and DriveWorks. 1991 Toyota Land Cruiser Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 38 extensive product reviews on 1991 Toyota Land Cruiser Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.3 stars and Shaft Repair Sleeve with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1991 Toyota Land Cruiser below to get started!
Top-Rated Drivetrains Brands For Your 1991 Toyota Land Cruiser
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1991 Toyota Land Cruiser back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1991 Toyota Land Cruiser, and some of our most reviewed National parts include:
FAQs for 1991 Toyota Land Cruiser Drivetrains
What are the most purchased Drivetrains for the 1991 Toyota Land Cruiser?
Out of 99 Drivetrains for the 1991 Toyota Land Cruiser, the most popular in our inventory are:
What are the top-rated 1991 Toyota Land Cruiser Drivetrains?
Top-rated Drivetrains for your 1991 Toyota Land Cruiser based on customer reviews/ratings are:
from
$39.49
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
