1991 Toyota 4Runner Drivetrains
More 1991 Toyota 4Runner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1991 Toyota 4Runner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1991 Toyota 4Runner Drivetrains
National – Multi Purpose Seal (Part No.710159)
from
$20.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 5.29 Ratio (Part No.24593)
from
$384.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Models w/ factory 3.07 & 4.88’s have a different offset and will need a new dropout when changing ratio.
Product Features:
See More
Product Features:
- Fits Toyota V6 rear
- 8.125″ ring gear diameter
- 29 spline pinion
- 10 ring gear bolts
- 5.29 ratio
NSK – Wheel Bearing Assembly (Part No.K8005410854NSK)
from
$140.51
NSK guarantees the high quality of all of their products by repeated, rigorous bench testing, and other checks that take full advantage of their cutting-edge technology, which only the major bearing manufacturers can offer. Double-row angular or taper contact ball bearing with integral high performance seal. Easy and reliable preload settings and include a simple mounting process with no spacer required. Hub bearings utilize an integral high-performance seal and feature a compact design with no grease packing required. NSK Hub unit bearings are designed to meet increasingly strict requirements that demand lighter weight, greater promotion of fuel efficiency, and enhanced module production systems.
Product Features:
See More
Product Features:
- Easy and reliable preload setting
- Easy mounting process
- No spacer required
- No grease packing required
- Compact
- Integral high performance seal.
Rugged Ridge – Locking Hub (Part No.15001.21)
from
$244.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Milemarker – Hub Conversion Kit (Part No.95-29918)
Yukon Gear – Toyota V6 Cross Pin Shaft (Part No.33416)
Dorman – Pre-Pressed Rear Axle (Part No.926-137)
from
$867.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install..
Product Features:
See More
Product Features:
- Easier installation – this loaded axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box.
- Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
- Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
Yukon Gear – Pinion Nut (Part No.33156)
from
$5.99
Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landrcuiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Product Features:
See More
Product Features:
- Pinion nut for Suzuki Samurai, Toyota 8″, V6, Landcruiser with 30 spline pinion and Tacoma/T100 with factory locker
- 20mm x 1.5 thread
- 30mm socket
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)
from
$8.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8471)
from
$88.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 89-95;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1989-1995
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.10 INCH / 3 MM
- MOUNT WIDTH: 5.75 INCH / 146 MM
USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)
from
$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Toyota 7.5″
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
NTN – Differential Pinion (Part No.J7020164790NTN)
from
$120.81
Differential Pinion
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion, With Pinion Seal & Pinion Nut (Part No.41212)
from
$144.99
Product Features:
See More
- Conversion kit
- Fits Toyota V6 rear with 29 spline pinion
- Includes yoke , pinion seal, and pinion nut
Motive Gear – Differential Gear Install Kit (Part No.TOYIK)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 8" In A 4.11 Ratio (Part No.24644)
from
$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits 1979-1985 Toyota Pickup and 4Runner and 1975-1990 Landcruiser
- 4.11 ratio
- 29 spline pinion
- Includes conversion yoke, seal, and pinion nut
Yukon Gear – Seal Housing For Toyota Zip Locker (Part No.34011)
Corteco – Axle Seal (Part No.K4021473844CFW)
from
$8.51
Axle Seal
Yukon Gear – Ring Gear Bolt (Part No.33060)
from
$6.99
Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Product Features:
See More
Product Features:
- Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
- 11mm x 1.0
Yukon Gear – 7.5", 8", & V6 Rear Axle Bearing Snap Ring / Retainer Clip (Part No.33373)
USA Standard Gear – Standard Spider Gear Set For Toyota 8", 4 Cylinder (Part No.39031)
from
$204.99
Product Features:
See More
- Spider gear kit
- Fits Toyota 8″ with 4 cylinder engine
- Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)
from
$123.99
Product Features:
See More
- Fits Toyota V6 rear
- Conversion yoke for 29 spline gears
- 29 spline pinion
NOK – Extension Hsng. Seal (Part No.J508135703NOK)
from
$8.02
Extension Hsng. Seal
Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)
from
$59.99
V6 Toyota solid crush sleeve replacement spacer kit, preload.
Product Features:
See More
Product Features:
- Crush sleeve eliminator kit for Toyota V6
National – Multi Purpose Seal (Part No.710254)
from
$2.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Differential Pinion (Part No.30359)
from
$55.99
Differential Pinion
Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)
Yukon Gear – Pinion Install Kit For Early Toyota 8" Differential (Part No.13089)
from
$234.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Toyota 8″ and 4 cylinder engine, 1986 and up with OEM ring and pinion set
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Popular 1991 Toyota 4Runner Drivetrains Categories
1991 Toyota 4Runner Drivetrains
You count on your 1991 Toyota 4Runner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 264 Drivetrains ranging in price from $2.99 to $1,356.99, you’re sure to find everything you need for your 1991 Toyota 4Runner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Valvoline, National, and Moog. 1991 Toyota 4Runner Drivetrains start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,140 extensive product reviews on 1991 Toyota 4Runner Drivetrains. Some of the top-rated Drivetrains products we carry are CV Axle Shaft Assembly with 4.6 stars and Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter with 3.5 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1991 Toyota 4Runner below to get started!
Top-Rated Drivetrains Brands For Your 1991 Toyota 4Runner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Toyota 4Runner running right for years to come. In our inventory you’ll find brands like Valvoline, National, Moog, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1991 Toyota 4Runner back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1991 Toyota 4Runner, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1991 Toyota 4Runner Drivetrains
What are the most purchased Drivetrains for the 1991 Toyota 4Runner?
Out of 264 Drivetrains for the 1991 Toyota 4Runner, the most popular in our inventory are:
from
$32.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
CV Quick Boot Kits
What are the top-rated 1991 Toyota 4Runner Drivetrains?
Top-rated Drivetrains for your 1991 Toyota 4Runner based on customer reviews/ratings are:
from
$132.99
(14)
CV Axle Shaft Assembly
“Axle appears to be identical to OEM. Joints are nice and tight. Boots and bands appear to be quality material. Only time will tell how they hold up.”
from
$29.99
(8)
Uni-Fit C.V. Joint Boot Kit Inner Greater Than 3.35 In. Diameter
“Worked great. Direct fit.”
