1991 Oldsmobile Cutlass Calais Exhaust Parts

Essential 1991 Oldsmobile Cutlass Calais Exhaust Parts

Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31522)

Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials

from

$16.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31511)

Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials

from

$18.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 36463 Exhaust Bolt and Spring (Part No.36463)

Exhaust 36463 Exhaust Bolt and Spring

from

$20.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • THE RIGHT CONNECTION — Designed to be used for ball and socket joint
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Bolt and Spring (Part No.ES 72141)

Exhaust Bolt and Spring

from

$17.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60985)

Exhaust Pipe Flange Gasket

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – Cat. Converter Gaske (Part No.H4002222598MAH)

Cat. Converter Gaske

from

$7.19
Cat. Converter Gaske

Felpro – Exhaust Pipe Flange Gasket (Part No.60477)

Exhaust Pipe Flange Gasket

from

$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-526)

Direct Fit Exhaust Manifold: Without Heat Shield

from

$182.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.

Product Features:
  • Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
  • Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
  • Complete repair – includes all necessary gaskets and downpipe hardware
  • Trustworthy design – built by industry leader in aftermarket manifolds
See More

Hooker Headers – Competition Header (Part No.2466-1HKR)

Competition Header

from

$668.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – ExhstHdr (Part No.2301HKR)

ExhstHdr

from

$642.99
ExhstHdr

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.91005)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$143.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94006)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$119.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81126)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$543.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Walker – Sound Solution Muffler (Part No.18607)

Sound Solution Muffler

from

$55.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18271)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$105.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842453)

50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

from

$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5

from

$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Bracket Hanger Length 10.5 (Part No.35724)

Bracket Hanger Length 10.5

from

$20.49
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offerin

Product Features:
  • Offered in a variety of styles and sizes for your installation needs
  • New Walker accessories help to ensure effective exhaust repairs
  • Constructed from durable and robust material for long life
  • Designed to work seamlessly with OE and Walker aftermarket replacement parts
  • Walker supplies all of the accessories you need to do the complete exhaust job
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2

from

$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS – Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5907)

Ultra Seal: Exhaust Gasket Set

from

$31.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Withstands Intense Exhaust Heat
  • Graphite-Impregnated Facing
  • Steel Expanded Metal Core
  • Superior Tensile Strength
  • Resists Deteriorating
  • Anti-stick Properties
  • Easy Removal For Disassembly
See More

Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66012)

Seal-4-Good Header Flange Gasket

from

$51.99
Seal-4-Good Header Flange Gasket

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5904)

Ultra Seal: Exhaust Gasket Set

from

$37.69
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-temperature steel core/graphite faced exhaust material
  • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
  • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
  • Conforms to and seals minor surface irregularities
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Anti-Stick Properties
  • Easy Removal For Disassembly
See More

Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7204)

Exhaust Manifold Gasket Set for Chevrolet

from

$24.99
Product Features:
  • 0.0625 in. Thickness
  • 1.50 in. x 1.50 in. Port Size
  • For SB Chevy
  • Black Color
  • Two Piece Configuration
See More

Walker – Exhaust 35281 Exhaust Spring (Part No.35281)

Exhaust 35281 Exhaust Spring

from

$6.49
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin

Product Features:
  • Walker offers a variety of fastener styles and sizes for your installation needs
  • Walker fasteners provide OE-style design for easy use
  • Manufactured from premium steel for durability
  • Designed to work seamlessly with Walker aftermarket replacement parts
  • Walker® supplies all of the accessories you need to do the complete exhaust job
See More

Dorman – Help – Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 And 0.5 ID X .75 x OD 1.13 In. (Part No.03084)

Exhaust Flange Spring-0.825 OD x 1.135 ID x 1.57 And 0.5 ID X .75 x OD 1.13 In.

from

$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:
  • Constructed of durable spring steel
  • Rust and corrosion resistant
  • Also available in a kit that include the Exhaust Manifold Bolt
  • Easy installation
See More

1991 Oldsmobile Cutlass Calais Exhaust Parts

You count on your 1991 Oldsmobile Cutlass Calais to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 29 Exhaust Parts ranging in price from $1.99 to $543.99, you’re sure to find everything you need for your 1991 Oldsmobile Cutlass Calais.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 6 different brands like Walker, Flowtech, and Felpro. 1991 Oldsmobile Cutlass Calais Exhaust Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 171 extensive product reviews on 1991 Oldsmobile Cutlass Calais Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Exhaust Bolt and Spring with 1.3 stars and Standard Grade Federal / EPA Compliant Universal Catalytic Converter with 3.0 stars.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1991 Oldsmobile Cutlass Calais below to get started!

Top-Rated Exhaust Parts Brands For Your 1991 Oldsmobile Cutlass Calais

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Oldsmobile Cutlass Calais running right for years to come. In our inventory you’ll find brands like Walker, Flowtech, Felpro, and even more.

Popular Walker Exhaust Parts

You’ll find popular Walker brand products across Catalytic Converters. All are waiting to get your 1991 Oldsmobile Cutlass Calais back on the road. Some of the top-rated Walker products in these categories are:
Sound Solution Muffler
from $70.99
(23)
Sound Solution Muffler
Mufflers

Top-Rated Exhaust Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1991 Oldsmobile Cutlass Calais, and some of our most reviewed parts include:
Bracket Hanger Length 10.5
from $20.49
(2)
Bracket Hanger Length 10.5
Exhaust Clamps

FAQs for 1991 Oldsmobile Cutlass Calais Exhaust Parts

What are the most purchased Exhaust Parts for the 1991 Oldsmobile Cutlass Calais?

Out of 29 Exhaust Parts for the 1991 Oldsmobile Cutlass Calais, the most popular in our inventory are:
SoundFX Muffler, Universal/ Fabrication Needed
from $85.99
This product is not rated
SoundFX Muffler, Universal/ Fabrication Needed
Mufflers
Terminator; Exhaust Tips
from $85.99
(5)
Terminator; Exhaust Tips
Exhaust Chrome and Stainless Tips

What are the top-rated 1991 Oldsmobile Cutlass Calais Exhaust Parts?

Top-rated Exhaust Parts for your 1991 Oldsmobile Cutlass Calais based on customer reviews/ratings are:
Exhaust Bolt and Spring
from $17.29
(3)
Exhaust Bolt and Spring
“Bolts too long, could not use. Had to grind down the springs to allow the nut to catch the old bolts.”
Exhaust Manifold Gasket Set
from $16.29
(1)
Exhaust Manifold Gasket Set
“FELPRO has the best products on the market”