1991 Mercedes-Benz 560SEL Engine Parts
More 1991 Mercedes-Benz 560SEL Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1991 Mercedes-Benz 560SEL, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1991 Mercedes-Benz 560SEL Engine Parts
Febi – Rocker Arm (Part No.A404015419FEB)
from
$53.16
Rocker Arm
Iwis – Timing Chain (Part No.A510011944IWI)
from
$150.91
Timing Chain
Hella – Oil Level Sender (Part No.A608016638HEL)
from
$61.69
Oil Level Sender
Dorman – Engine Oil Drain Plug Gasket (Part No.A6120831514DOR)
from
$6.82
Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.
Product Features:
See More
Product Features:
- Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
- Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
- Made to specific sizes and standards to ensure a proper fit
- Designed and constructed to strict engineering quality standards
Febi – Freeze Plug (Part No.A1030566099FEB)
from
$2.63
Freeze Plug
Driveworks – Auxiliary Shaft Seal (Part No.S-710288)
Corteco – Corteco Engine Mount (Part No.A700016026CFW)
from
$26.66
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise Vibration Control Brochure
AE – Camshaft (Part No.A400033226AE)
from
$328.34
Camshaft
Febi – FEBI Timing Chain Tensioner (Part No.A511015408FEB)
from
$161.00
The FEBI Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- High quality precision tension assembly
- OE specified guide rail when supplied
- Durable long life performance
Febi – Engine Shock (Part No.A707025234FEB)
from
$53.23
Engine Shock
Canyon Engine – Manganese Bronze Valve Guide (Part No.A306026693CEC)
from
$9.84
The Canyon Engine Valve Guide is manufactured using Manganese Bronze and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.
Product Features:
See More
Product Features:
- OE Quality
- Same design as the original equipment part
- Manufactured from Manganese Bronze material
- Complete with snap ring (Mercedes)
Febi – Camshaft Oiler Kit (Part No.A635015447FEB)
from
$10.70
Camshaft Oiler Kit
INA – Ball Stud (Part No.A418015405INA)
from
$66.00
Ball Stud
National – Multi Purpose Seal (Part No.710288)
from
$34.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Beck/Arnley – Valve Cover Gasket (Part No.036-0834)
from
$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made from premium materials for durability
- Designed to withstand high underhood temperatures
- Packaged in clear plastic for easy visibility and identification of all components
- Application specific for this vehicle
CRP – Oil Dipstick Seal (Part No.A1120399770CRP)
from
$2.00
Oil Dipstick Seal
Iwis – Oil Pump Chain (Part No.A603011948IWI)
from
$31.80
Oil Pump Chain
Elring – Cylinder Head Gasket Set (Part No.A810085720ELR)
from
$65.30
Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.
Product Features:
See More
Product Features:
- Produced from spring steel for long-lasting flexibility of beads
- Thermal stability up to 600F
- Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
- Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
- Tightening instructions provided with each gasket for perfect results
Febi – Timing Guide Rail (Part No.A504015627FEB)
from
$11.66
Timing Guide Rail
Glyco – Main Bearing Set (Part No.A20101903444GLY)
from
$182.82
Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Excellent wear resistance
- Low propensity to seize
- Reduction in Friction
Carquest Premium – Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10079)
from
$8.29
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Rein – Cap-Oil (Part No.CPL0025P)
National – Multi Purpose Seal (Part No.710196)
from
$33.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99114)
from
$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
CRP – Fuel Sender Seal (Part No.E205049468CRP)
from
$2.97
Fuel Sender Seal
Rein – Timing Cover O-Ring (Part No.A506747926RIN)
from
$1.24
Timing Cover O-Ring
Popular 1991 Mercedes-Benz 560SEL Engine Parts Categories
1991 Mercedes-Benz 560SEL Engine Parts
You count on your 1991 Mercedes-Benz 560SEL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 42 Engine Parts ranging in price from $1.24 to $328.34, you’re sure to find everything you need for your 1991 Mercedes-Benz 560SEL.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 20 different brands like Carquest Premium, Dorman, and National. 1991 Mercedes-Benz 560SEL Engine Parts start as low as $1.24!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 1991 Mercedes-Benz 560SEL Engine Parts.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1991 Mercedes-Benz 560SEL below to get started!
Top-Rated Engine Parts Brands For Your 1991 Mercedes-Benz 560SEL
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Mercedes-Benz 560SEL running right for years to come. In our inventory you’ll find brands like Carquest Premium, Dorman, National, and even more.
Popular Anchor Engine Parts
You’ll find popular Anchor brand products across Engine Mounts. All are waiting to get your 1991 Mercedes-Benz 560SEL back on the road. Some of the top-rated Anchor products in these categories are:
Top-Rated Engine Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Engine Parts for your 1991 Mercedes-Benz 560SEL, and some of our most reviewed parts include:
from
$8.29
(4)
Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
FAQs for 1991 Mercedes-Benz 560SEL Engine Parts
What are the most purchased Engine Parts for the 1991 Mercedes-Benz 560SEL?
Out of 42 Engine Parts for the 1991 Mercedes-Benz 560SEL, the most popular in our inventory are:
