1991 Mazda Navajo Exhaust Parts
More 1991 Mazda Navajo Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1991 Mazda Navajo, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1991 Mazda Navajo Exhaust Parts
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.17820)
from
$88.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18224)
from
$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – 3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31545)
from
$14.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31372)
from
$15.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Flange Gasket (Part No.256-1043)
from
$12.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
BRExhaust – Exhaust Flange Gasket (Part No.256-1023)
from
$14.89
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust 36129 Exhaust Bolt and Spring (Part No.36129)
from
$18.49
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION — Designed to be used for ball and socket joint
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.80608)
from
$429.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23388)
from
$610.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23388 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1989-1994 Ford Ranger, 1991-1994 Ford Explorer, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.333388)
from
$688.99
MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 333388 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1989-1994 Ford Ranger, 1991-1994 Ford Explorer, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15737)
from
$575.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Standard® direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Walker – Exhaust 35564 Exhaust Muffler Strap (Part No.35564)
from
$16.49
Walker® provides the hardware and accessories to help finish the job faster and easier. Walker® is a “one-stop” convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic, import
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Ensures proper exhaust installation
- Designed to work seamlessly with Walker aftermarket replacement parts
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94764)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Walker – Exhaust 35567 Exhaust Heat Shield (Part No.35567)
from
$13.29
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Helps to protect external objects from the extreme heat of an exhaust system
- Offered in a variety of styles and sizes for your installation needs
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- Constructed from durable and robust material for long life
- Walker® supplies all of the accessories you need to do the complete exhaust job
Popular 1991 Mazda Navajo Exhaust Parts Categories
1991 Mazda Navajo Exhaust Parts
You count on your 1991 Mazda Navajo to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 27 Exhaust Parts ranging in price from $2.49 to $688.99, you’re sure to find everything you need for your 1991 Mazda Navajo.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 5 different brands like Walker, Felpro, and Flowtech. 1991 Mazda Navajo Exhaust Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 85 extensive product reviews on 1991 Mazda Navajo Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter with 4.5 stars and Exhaust Flange Gasket with 4.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1991 Mazda Navajo below to get started!
Top-Rated Exhaust Parts Brands For Your 1991 Mazda Navajo
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Mazda Navajo running right for years to come. In our inventory you’ll find brands like Walker, Felpro, Flowtech, and even more.
Popular Felpro Exhaust Parts
You’ll find popular Felpro brand products across Exhaust Gaskets and Exhaust Pipes. All are waiting to get your 1991 Mazda Navajo back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Walker Exhaust Parts
If Walker are what you’re looking for, our inventory holds plenty. We stock Walker brand Exhaust Parts for your 1991 Mazda Navajo, and some of our most reviewed Walker parts include:
from
$15.49
(22)
Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
FAQs for 1991 Mazda Navajo Exhaust Parts
What are the most purchased Exhaust Parts for the 1991 Mazda Navajo?
Out of 27 Exhaust Parts for the 1991 Mazda Navajo, the most popular in our inventory are:
from
$102.99
(1)
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
What are the top-rated 1991 Mazda Navajo Exhaust Parts?
Top-rated Exhaust Parts for your 1991 Mazda Navajo based on customer reviews/ratings are:
from
$610.99
(4)
Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
“Great catalytic. It was a direct fit and easy to install.”
