1991 Mazda Miata Fuel and Emissions Systems
More 1991 Mazda Miata Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1991 Mazda Miata, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1991 Mazda Miata Fuel and Emissions Systems
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Switching Oxygen Sensor: 4 Wire, 29.25" Long, Heated, Direct Fit (Part No.22502)
from
$144.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – First Time Fit Oxygen Sensor (Part No.C5010121653ND)
from
$127.41
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Nippon Reinz – Fuel Injector O-Ring (Part No.C101233762NRZ)
from
$2.94
Nippon Reinz engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, Nippon Reinz offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components. Located at top of Fuel Injector.
See More
Ishino – Fuel Injector Seal (Part No.C1010260656ISH)
from
$4.95
Fuel Injector Seal
Ishino Stone – Fuel Injector Seal (Part No.C1010260657ISH)
from
$4.36
Fuel Injector Seal
Delphi – Fuel Injection Pressure Regulator (Part No.FP10425)
from
$148.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
- Quiet operation, no audible regulator noise
- Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
- Consistent and predictable fuel pressure throughout system range of control provides great drivability
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1240)
from
$179.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Carquest Premium – Fuel Pump Relay (Part No.RAA1847)
from
$80.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Multi Purpose Relay (Part No.RAA1303)
from
$70.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Pump Strainer (Part No.FS0101)
from
$25.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Filtration performance and micron rating meet or exceed OE requirements
- OE replacement strainer designed for use with Delphi electric fuel pumps
- Replacing the strainer is always recommended when replacing a fuel pump
Carquest Premium – Fuel Pump Strainer FS2480555 (Part No.FS2480555)
from
$15.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
Original Equipment – Original Equipment Fuel Injector (Part No.C1000143945OEA)
from
$277.07
The Original Equipment brand is the same OEM quality and performance of the original equipment it replaces and is supplied in a plain box, with the car manufacturer’s logo on the part. Original Equipment fuel injectors are manufactured to OE requirements that meet federal emissions and fuel economy standards, and provide exact OE fit for ease of installation.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- Premium internal components
- OE Calibrated impedance
- Fine atomized spray reduces emissions
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3154)
from
$54.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Spectra Premium – Electric Fuel Pump (Part No.SP1166)
from
$141.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium electrical fuel pumps meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Engineered and developed in Canada
- All applicable hardware and components provided for product installation
- Carbon commutators, found on specific high flow pump applications, offer increased durability and generate less heat equating to longer lasting fuel pumps
- Endurance tested and validated by accredited, third party lab
- 100% performance tested
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Engineered and developed by Spectra Premium; proud member of the AASA fuel pump manufacturers working group
DENSO – Original Equipment Quality Fuel Pump & Strainer Kit (Part No.950-0118)
from
$151.99
As the innovator and leader in fuel supply technology DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11974-01)
from
$7.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 96419)
from
$14.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – THROTTLE BODY GASKET SET (Part No.73102)
from
$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60984)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1615)
from
$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Fuel Injector Connector (Part No.PTA1064)
from
$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Fuel Injector Connector (Part No.PT2318)
from
$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
- Offering thousands of high-quality pigtails & sockets for nearly every electrical job
Popular 1991 Mazda Miata Fuel and Emissions Systems Categories
1991 Mazda Miata Fuel and Emissions Systems
You count on your 1991 Mazda Miata to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 28 Fuel and Emissions Systems ranging in price from $2.79 to $266.46, you’re sure to find everything you need for your 1991 Mazda Miata.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Carquest Premium, Delphi, and Bosch. 1991 Mazda Miata Fuel and Emissions Systems start as low as $2.79!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 40 extensive product reviews on 1991 Mazda Miata Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Fuel Injection Throttle Body Mounting Gasket with 4.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1991 Mazda Miata below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1991 Mazda Miata
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Mazda Miata running right for years to come. In our inventory you’ll find brands like Carquest Premium, Delphi, Bosch, and even more.
Popular DENSO Fuel and Emissions Systems
You’ll find popular DENSO brand products across Fuel Pumps. All are waiting to get your 1991 Mazda Miata back on the road. Some of the top-rated DENSO products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1991 Mazda Miata, and some of our most reviewed parts include:
FAQs for 1991 Mazda Miata Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1991 Mazda Miata?
Out of 28 Fuel and Emissions Systems for the 1991 Mazda Miata, the most popular in our inventory are:
What are the top-rated 1991 Mazda Miata Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1991 Mazda Miata based on customer reviews/ratings are:
from
$2.79
(2)
Fuel Injection Throttle Body Mounting Gasket
“Part fix correctly and working very well”
