1991 Isuzu FTR Suspension Parts

More 1991 Isuzu FTR Suspension Parts Categories

If you’re looking for an original Suspension Parts replacement for a 1991 Isuzu FTR, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.

Essential 1991 Isuzu FTR Suspension Parts

Monroe – Magnum Shock Absorber (Part No.65468)

Magnum Shock Absorber

from

$128.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

KYB – Gas Shock (Part No.341619)

Gas Shock

from

$93.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Shock For Heavy Duty Trucks And Commercial Vehicles
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Heavy Duty Chevrolet Truck
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Made In Use
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More
View Product

Monroe – Magnum Shock Absorber (Part No.66628)

Magnum Shock Absorber

from

$89.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
  • 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
See More
View Product

Monroe – Magnum Shock Absorber (Part No.66605)

Magnum Shock Absorber

from

$82.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
  • 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65416)

Magnum Shock Absorber

from

$116.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65484)

Magnum Shock Absorber

from

$135.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 1997-2002 GMC T6500 (Part No.HD1215-0039)

Heavy-Duty Shock Absorber - 1997-2002 GMC T6500

from

$72.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65161)

Magnum Shock Absorber

from

$119.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65413)

Magnum Shock Absorber

from

$128.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 1987-1996 Chevrolet W6500 Tiltmaster (Part No.HD1214-0526)

Heavy-Duty Shock Absorber - 1987-1996 Chevrolet W6500 Tiltmaster

from

$58.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Monroe – Magnum Shock Absorber (Part No.66626)

Magnum Shock Absorber

from

$83.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
  • 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65414)

Magnum Shock Absorber

from

$128.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 1997-2002 GMC T6500 (Part No.HD1215-0031)

Heavy-Duty Shock Absorber - 1997-2002 GMC T6500

from

$90.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

1991 Isuzu FTR Suspension Parts

You count on your 1991 Isuzu FTR to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 2 Suspension Parts ranging in price from $58.99 to $82.99, you’re sure to find everything you need for your 1991 Isuzu FTR.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 2 different brands like Monroe and Bulldog HD. 1991 Isuzu FTR Suspension Parts start as low as $58.99!

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1991 Isuzu FTR below to get started!