1991 Infiniti G20 Steering and Chassis Parts

Essential 1991 Infiniti G20 Steering and Chassis Parts

MOOG – Tie Rod End (Part No.ES3413)

Tie Rod End

from

$64.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly reducing corrosion and wear
  • Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Whiteline – Camber Adjusting Bolt (Part No.KCA412)

Camber Adjusting Bolt

from

$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Rare Parts – Ball Joint (Part No.RP10642)

Ball Joint

from

$35.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

EMPI – Steering Rack Boot Kit, 1 Boot + Clamps (Part No.M1030133651EMP)

Steering Rack Boot Kit, 1 Boot + Clamps

from

$19.67
Steering Rack Boot Kit, 1 Boot + Clamps

MOOG – Suspension Stabilizer Bar Link (Part No.K9826)

Suspension Stabilizer Bar Link

from

$44.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Dorman – Suspension Control Arm (Part No.521-569)

Suspension Control Arm

from

$144.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Power Steering Pump (Part No.21-5314)

Power Steering Pump

from

$157.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – End Fittings – Straight (Part No.34819)

End Fittings - Straight

from

$9.79
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Carquest Premium – Pressure Hose Assembly (Part No.35553)

Pressure Hose Assembly

from

$95.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Pump Seal Kit (Part No.8942)

Pump Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.8830)

Pump Seal Kit

from

$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

TRW – Stabilizer Link (Part No.L1030152449TRW)

Stabilizer Link

from

$49.04
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Whiteline – Sway Bar Link Bushing (Part No.W21014)

Sway Bar Link Bushing

from

$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K9757)

Camber Bolt Kit

from

$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA303)

Control Arm Lower Inner Rear Bushing

from

$38.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)

Bulk - 3/8" I.D. Return Hose J189

from

$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Cardone – Rack and Pinion Assembly (Part No.26-1880)

Rack and Pinion Assembly

from

$235.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.26-3015)

Rack and Pinion Assembly

from

$523.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90473)

Camber Bolt Kit

from

$17.99
Camber Bolt Kit

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Powercraft – Rack Pinion Seal Kit (Part No.8888)

Rack Pinion Seal Kit

from

$84.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

1991 Infiniti G20 Steering and Chassis Parts

You count on your 1991 Infiniti G20 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 38 Steering and Chassis Parts ranging in price from $1.81 to $235.99, you’re sure to find everything you need for your 1991 Infiniti G20.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Carquest Premium, Cardone, and Driveworks. 1991 Infiniti G20 Steering and Chassis Parts start as low as $1.81!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 99 extensive product reviews on 1991 Infiniti G20 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Camber Adjusting Kit with 3.2 stars and Camber Adjusting Kit with 5.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1991 Infiniti G20 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1991 Infiniti G20

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Infiniti G20 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, Driveworks, and even more.

Popular Driveworks Steering and Chassis Parts

You’ll find popular Driveworks brand products across Alignment Hardware and Camber Kits. All are waiting to get your 1991 Infiniti G20 back on the road. Some of the top-rated Driveworks products in these categories are:
Camber Bolt Kit
from $24.99
(1)
Camber Bolt Kit
Alignment Caster Adjustment Spacers
Camber Bolt Kit
from $17.99
(7)
Camber Bolt Kit
Caster and Camber Kits

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1991 Infiniti G20, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters
Power Steering Filter
from $46.99
(1)
Power Steering Filter
Power Steering Filters

FAQs for 1991 Infiniti G20 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1991 Infiniti G20?

Out of 38 Steering and Chassis Parts for the 1991 Infiniti G20, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
Power Steering Reservoir Hoses

What are the top-rated 1991 Infiniti G20 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1991 Infiniti G20 based on customer reviews/ratings are:
Camber Adjusting Kit
from $30.99
(5)
Camber Adjusting Kit
“Works as designed to adjust camber to spec”
Camber Adjusting Kit
from $42.99
(2)
Camber Adjusting Kit
“easy to use/install. easy to follow instructions and works just like it says it does.”
Pressure Hose Assembly
from $95.99
(2)
Pressure Hose Assembly
“Product was a perfect fit”