1991 Honda Prelude Ball Joints
More 1991 Honda Prelude Ball Joints
Find your specific 1991 Honda Prelude original or aftermarket Ball Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1991 Honda Prelude Ball Joints
Sankei 555 – Ball Joint: Replaces Worn Original Part for Superior Handling and Precision (Part No.L2020462432SNK)
from
$29.99
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Carquest Premium – Ball Joint (Part No.400-670098)
from
$23.99
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hardware included for easier installation (where applicable)
- Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
Rare Parts – Ball Joint (Part No.RP71566)
from
$234.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP12757)
from
$71.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Driveworks – Ball Joint (Part No.DW-K9817)
from
$16.99
Ball Joint
Driveworks – Ball Joint (Part No.DW-K9922)
from
$15.99
Ball Joint
Rare Parts – Ball Joint (Part No.RP11968)
from
$69.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Ball Joint (Part No.K500215)
from
$51.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
CTR – Ball Joint (Part No.L202064673CTR)
from
$34.88
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
TRW – Ball Joint (Part No.L2020451471TRW)
from
$81.37
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
Rare Parts – Ball Joint (Part No.RP71565)
from
$249.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Ball Joint (Part No.K90492)
from
$128.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Beck/Arnley – Ball Joint Front Upper (Part No.101-4786)
from
$86.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Necessary hardware supplied as needed for a complete installation
- Hardware functionality matches original design requirements
- Application specific for this vehicle
Sankei 555 – Ball Joint (Part No.L2020104112SNK)
from
$53.11
Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Driveworks – Ball Joint (Part No.DW-K90490)
from
$9.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Driveworks – Ball Joint (Part No.DW-K9643)
from
$43.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Driveworks – Ball Joint (Part No.DW-K90492)
from
$13.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
MOOG – Ball Joint (Part No.K9385)
from
$57.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Popular 1991 Honda Prelude Ball Joints Categories
1991 Honda Prelude Ball Joints
Maybe you’re in the middle of a full rebuild of that 1991 Honda Prelude. Maybe you just need a couple of Ball Joints. Either way, Advance Auto Parts has 10 different Ball Joints in our inventory ranging from $21.51 to $75.99. That means you can find the exact parts or products you need to keep that 1991 Honda Prelude running smoothly.
Ball Joints are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1991 Honda Prelude. Driveworks, Carquest Premium, and Sankei are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ball Joints for your 1991 Honda Prelude, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ball Joints to keep your 1991 Honda Prelude rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ball Joints Brands To Make Your 1991 Honda Prelude Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 Honda Prelude demands trusted brand parts and products to keep it running. Many trusted brands of Ball Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Prelude the best it can be. Be sure to browse some of our top Ball Joints brands and parts.
Popular TRW Ball Joints
We carry TRW parts in our stock across Lower Ball Joints categories, plus more. For a 1991 Honda Prelude, our most popular TRW Ball Joints include:
Top 1991 Honda Prelude Ball Joints from Driveworks
Driveworks products are another trusted brand when it comes to Ball Joints for your 1991 Honda Prelude. Popular Driveworks parts include:
FAQs for 1991 Honda Prelude Ball Joints
What are the most purchased Ball Joints for the 1991 Honda Prelude?
Out of 10 Ball Joints for the 1991 Honda Prelude, the most popular in our inventory are:
from
$29.99
This product is not rated
Ball Joint: Replaces Worn Original Part for Superior Handling and Precision
Lower Ball Joints
