1991 Dodge D250 Exhaust Parts
Find Your Specific 1991 Dodge D250 Exhaust Parts
Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 1991 D250. Advance Auto Parts has popular D250 parts like Exhaust Manifold and Headers, Exhaust Fittings, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other D250 model years including
1984,
1985,
1986,
1987,
1988,
1989,
1990,
1992,
1993 and more. Select a category of 1991 Dodge D250 Exhaust Parts below and start saving instantly.
Popular 1991 Dodge D250 Exhaust Parts Categories
Essential Exhaust Parts for 1991 Dodge D250s
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93276)
from
$408.99
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93276 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1988-1991 Dodge D150, 1988-1991 Dodge D250, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.3391014)
from
$1213.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3391014 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT¿– Universal fit for installation flexibility
- CUSTOMIZABLE FIT┐– Universal fit for installation flexibility
- COMPATIBILITY — Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS¿–¿Made from¿aluminum¿for durability and¿long life
- QUALITY MATERIALS┐–┐Made from┐aluminum┐for durability and┐long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker« accessories help to ensure effective exhaust repairs
- New Walker® accessories help to ensure effective exhaust repairs
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Tail Pipe Aluminized 45" (Part No.45105)
from
$108.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Tail Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.42499)
from
$49.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger (Part No.35816)
from
$24.79
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Hanger Length 7.75 (Part No.35261)
from
$12.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Edelbrock – Exhaust Manifold Gasket Set for Chrysler (Part No.7237)
from
$34.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Mr. Gasket – Exhaust Gasket Set (Part No.358)
from
$33.99
Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.30 inch x 1.80 inch
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Precision Die Cut For Excellent Fit
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-232)
from
$468.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-527)
from
$196.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Felpro – Exhaust Pipe Flange Gasket (Part No.9547)
from
$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Metal, Heat Resistant, Premium Materials (Part No.31307)
from
$5.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Connector 3" Inlet (ID) 3" Outlet (OD) (Part No.41970)
from
$18.29
Complete your exhaust repair with Walker? Connectors. Featuring a smooth, burr-free finish for proper fitment, Walker? Connectors are? Manufactured from durable and robust material for long service life.?
Product Features:
See More
Product Features:
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubingá
- SMOOTH FINISH — Burr-free construction for proper fitment
- SMOOTH FINISH — Burr-free construction for proper fitmentá
- QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?
- QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?á
- BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgradeá
Walker – Sound Solution Muffler (Part No.18647)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.952546)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.842551)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Extension Pipe Aluminized 47.125" (Part No.45656)
from
$47.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Walker – Exhaust Pipe 2.25" Inlet (OD) 2.25" Outlet (ID) (Part No.42477)
from
$24.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 2.25" Inlet (OD) 2.5" Outlet (OD) (Part No.45381)
from
$53.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Dorman – Help – Install kit for mounting exhaust manifold to engine includes 12 -10X1.50mm bolts (Part No.03417B)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 1991 Dodge D250 with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1991 Dodge D250, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your D250 functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Exhaust Parts for the 1991 Dodge D250, designed to meet your needs without breaking the bank.
From
Exhaust Manifold and Header
replacements to
Exhaust Fittings
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1991 Dodge D250 at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.99 to $1,213.99, with
an average price of $118.29.
Our 41 Exhaust Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1991 Dodge D250 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Dodge D250, we stock popular OEM and aftermarket Exhaust Parts from top names
like Walker, Flowmaster Inc., Dynomax, and more.
Walker Exhaust Parts
start at just $1.99 and boast an impressive 4 stars average rating from customers.
Flowmaster Inc. and Dynomax also bring quality to the table, with Exhaust Parts available starting at $17.99, and at an average 4 stars rating.
With 453 customer reviews and counting, our 1991 Dodge D250 Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1991 Dodge D250 is always ready to roll. We’re committed to providing you with everything you need to keep your D250 in top shape, all in one place.
Start shopping confidently below for your 1991 Dodge D250!
Best-Selling Exhaust Manifold and Headers for 1991 Dodge D250s
Enhance the driving experience in your Dodge with 4 quality Exhaust Manifold and Header components, starting at $47.99.
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT¿– Universal fit for installation flexibility
- CUSTOMIZABLE FIT┐– Universal fit for installation flexibility
- COMPATIBILITY — Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS¿–¿Made from¿aluminum¿for durability and¿long life
- QUALITY MATERIALS┐–┐Made from┐aluminum┐for durability and┐long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker« accessories help to ensure effective exhaust repairs
- New Walker® accessories help to ensure effective exhaust repairs
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-527)
from
$196.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Hooker Headers – LS1 Engine Swap Headers for 66-72 Chevelle, El Camino & More (Part No.5902-1HKR)
from
$675.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Most Popular 1991 Dodge D250 Exhaust Fittings
Customize your Dodge with 5 Exhaust Fittings products
like Exhaust Clamps, all
priced under $17.99.
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dynomax – Exhaust Hangers/Hardware (Part No.36125)
from
$17.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax® Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax® products – engineered for
Product Features:
See More
Product Features:
- Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
- Hardware and accessories provide OE-style features and design for greater durability for longer service life
- Hardware and accessories provide OE-style fit and finish for easy use and installation
- Hardware and accessories are manufactured from premium steel to provide greater durability
- Hardware and accessories are manufactured to work seamlessly with all Dynomax® performance parts, making installation quick and easy
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 1991 Dodge D250 Exhaust Hangers
Upgrade Dodge D250s with top-quality Exhaust Hangers parts, including 3 OEM and aftermarket selections for your 1991 model.
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger (Part No.35816)
from
$24.79
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Hanger Length 7.75 (Part No.35261)
from
$12.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Exhaust Mufflers for 1991 Dodge D250s
Select from 12 premium Exhaust Mufflers parts for your 1991 Dodge D250, with prices ranging from $59.99 to $221.99.
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42541)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Dynomax – Super Turbo Muffler Uni Fit Aluminized Steel 20" L, 2.5" In, 2.5" Out, Oval (Part No.17748)
from
$82.99
DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
- Dyno proven to flow up to 700 SCFM
Flowmaster Inc. – Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound (Part No.71226)
from
$59.99
Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042541)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.842551)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 70 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 22in long, Non-Reversible, Mild Sound (Part No.52571)
from
$221.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 50 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.852556)
from
$206.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Mild to stock exterior exhaust tone
- Minimal interior resonance
- Excellent choice for large displacement vehicles
- Improved horsepower, torque and potential mileage improvement
- Race proven patented Delta Flow technology
Walker – SoundFX Direct Fit Exhaust Muffler 3" Inlet (ID) 3" Outlet (ID) (Part No.18371)
from
$156.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)
from
$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Deep aggressive exhaust note
- Noticeable interior resonance
- Excellent performance on high horsepower vehicles
- No internal packing to blowout
Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.952546)
from
$133.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942541)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842546)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Most Sold 1991 Dodge D250 Exhaust Pipes
Explore our best-selling Dodge parts for the 1991 D250 among 6 OEM and aftermarket options starting from $2.49.
Walker – Exhaust Pipe 2.25" Inlet (OD) 2.25" Outlet (ID) (Part No.42477)
from
$24.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe Connector 3" Inlet (ID) 3" Outlet (OD) (Part No.41970)
from
$18.29
Complete your exhaust repair with Walker? Connectors. Featuring a smooth, burr-free finish for proper fitment, Walker? Connectors are? Manufactured from durable and robust material for long service life.?
Product Features:
See More
Product Features:
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubing
- THE RIGHT CONNECTION — For connecting exhaust pipe and/or tubingá
- SMOOTH FINISH — Burr-free construction for proper fitment
- SMOOTH FINISH — Burr-free construction for proper fitmentá
- QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?
- QUALITY MATERIALS?–?Made from aluminized steel for durability and long life?á
- BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- BETTER TOGETHER?–?Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgradeá
Walker – Exhaust Tail Pipe 2.5" Inlet (ID) 2.5" Outlet (OD) (Part No.42499)
from
$49.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 45" (Part No.45105)
from
$108.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 2.25" Inlet (OD) 2.5" Outlet (OD) (Part No.45381)
from
$53.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
- COMPATIBILITY — Ideal for weld or clamp installations
Felpro – Exhaust Pipe Flange Gasket (Part No.60928)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Top-Rated Exhaust Parts Brands For Your 1991 Dodge D250
Shop for the best-rated brands offering Exhaust Parts and other products for your 1991 Dodge D250s. Below you’ll find some of our best rated Exhaust Parts from Walker, Flowmaster Inc., and Dynomax, and more. Exhaust Parts from these brands that fit a 1991 D250 start at just $1.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Walker 1991 Dodge D250 Exhaust Parts
When it comes to maintaining or upgrading your 1991 Dodge D250, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 1991 Dodge D250. With over 15 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $49.16. Plus, with over 76 customer reviews and an average rating of 4 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Flowmaster Inc. 1991 Dodge D250 Exhaust Parts
Flowmaster Inc. auto parts is one of the highest quality Exhaust Part brands in the market. Any 1991 Dodge D250 owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 1991 D250, Advance Auto Parts carries a full inventory of 10 Flowmaster Inc. Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Flowmaster Inc. Exhaust Parts range from $59.99 to $221.99, plus, with more than 7 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$123.99
$123.99
This product is not rated
40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound
“”
from
$175.99
$175.99
This product is not rated
50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound
“”
from
$59.99
$59.99
This product is not rated
Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound
“”
FAQs for 1991 Dodge D250 Exhaust Parts
Which Exhaust Parts are best-sellers for 1991 Dodge D250s?
Out of 41 Exhaust Parts that fit 1991 Dodge D250s, the following parts are the top sellers:
- Flow FX Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 14in long, Non-Reversible, Aggressive Sound (11920321) – $59.99
- Super Turbo Muffler Uni Fit Aluminized Steel 20" L, 2.5" In, 2.5" Out, Oval (18290116) – $82.99
- 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (16120042) – $99.99
What’s the price range for 1991 Dodge D250 Exhaust Parts?
Exhaust Part prices for the 1991 Dodge D250 start at $1.99 and go up to $1,213.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1991 Dodge D250?
The average price for Exhaust Parts for the 1991 Dodge D250 is $118.29. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Dodge D250 model years?
What are the cheapest Exhaust Parts for my 1991 Dodge D250?
The cheapest 1991 Dodge D250 Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012223) – $1.99
- Exhaust Clamp (11012137) – $2.49
- Exhaust Pipe Flange Gasket (19780213) – $2.49
- Exhaust 35460 Exhaust System Hanger Insulator (5601657) – $6.79
- Exhaust Clamp (11012146) – $8.99
What are the top-rated Exhaust Parts that fit the 1991 Dodge D250?
Out of 453 reviews by customers, our 1991 Dodge D250 Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1991 Dodge D250 and their top-rated products:
- Exhaust Gaskets
- Exhaust Manifold Gasket Set (5184630) – $22.99
- Exhaust Fittings
- Exhaust Manifold Gasket Set (5184630) – $22.99
- Exhaust Tips
- Exhaust Manifold Gasket Set (5184630) – $22.99
What types of Exhaust Parts do you sell for my 1991 Dodge D250?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1991 Dodge D250:
Can I get help with 1991 Dodge D250 Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.
What is your return policy for Dodge D250 Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Dodge D250 Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
