1991 Daihatsu Rocky Engine Cooling Parts

Essential 1991 Daihatsu Rocky Engine Cooling Parts

Carquest – A/C and Heater Relay (Part No.R3054)

A/C and Heater Relay

from

$20.99
Product Features:
  • Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
  • A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
  • Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
  • The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.E1878)

Engine Coolant Temperature Sensor

from

$19.99
ACDelco Professional Engine Coolant Temperature Sender is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sender is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Engine Coolant Temperature Sender (Part No.WTA1658)

Engine Coolant Temperature Sender

from

$14.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Coolant Temperature Sensor with Thread Sealant and O-Ring (Part No.WTC1634)

Coolant Temperature Sensor with Thread Sealant and O-Ring

from

$97.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1066)

Temperature Sender With Gauge

from

$15.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Carquest Premium – New Premium Water Pump (Part No.T1107)

New Premium Water Pump

from

$51.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. A

Product Features:
  • This pump is used on accessory belt driven applications
  • Used mostly on models equipped with a fan clutch
  • It is highly recommended that the fan clutch be replaced with the water pump
  • All gaskets or seals necessary for installation are supplied with pump
  • Durable housing features precisely machined mounting surfaces for proper sealing
See More

NPW – NPW Water Pump (Part No.G300028936NPW)

NPW Water Pump

from

$57.43
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced impeller design.
  • Quality cast housing.
  • Precision bearings.
  • Resistant to corrosion.
  • Unitized bearing assembly.
See More

Motorad UltraStats – Thermostat: 180 Degrees (Part No.5270-180)

Thermostat: 180 Degrees

from

$17.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:
  • Heavy gauge stainless steel components offer increased reliability and long-lasting durability
  • Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
  • Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
  • AccuSpring Design for stable temperature control and increased cabin comfort
See More

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13978)

Standard Thermostat: 180 Degrees

from

$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Thermostat (Part No.48288)

Thermostat

from

$5.79
Original equipment design provides exact fit and performance.

Product Features:
  • Precise fitting sealing edges prevent leakage and premature cooling.
  • Self-cleaning and self-aligning thermostat valve.
  • Stainless steel assembly and springs are engineered for long life and smooth performance.
See More

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13979)

Standard Thermostat: 195 Degrees

from

$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ

from

$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

1991 Daihatsu Rocky Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 1991 Daihatsu Rocky. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 18 different Engine Cooling Parts in our inventory ranging from $5.79 to $97.99. That means you can find the exact parts or products you need to keep that 1991 Daihatsu Rocky running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1991 Daihatsu Rocky. Permatex, Carquest Premium, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 1991 Daihatsu Rocky, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 814 reviews in this category, some of the top rated parts include A/C and Heater Relay with 3.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1991 Daihatsu Rocky rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 1991 Daihatsu Rocky Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 Daihatsu Rocky demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Rocky the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular ACDelco Engine Cooling Parts

We carry ACDelco parts in our stock across Temperature Switch and Senders categories, plus more. For a 1991 Daihatsu Rocky, our most popular ACDelco Engine Cooling Parts include:
Engine Coolant Temperature Sensor
from $19.99
(1)
Engine Coolant Temperature Sensor
Temperature Switch and Senders

Top 1991 Daihatsu Rocky Engine Cooling Parts from Permatex

Permatex products are another trusted brand when it comes to Engine Cooling Parts for your 1991 Daihatsu Rocky. Popular Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 1991 Daihatsu Rocky Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 1991 Daihatsu Rocky?

Out of 18 Engine Cooling Parts for the 1991 Daihatsu Rocky, the most popular in our inventory are:
Standard Thermostat: 195 Degrees
from $10.99
(8)
Standard Thermostat: 195 Degrees
Thermostats
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Standard Thermostat: 180 Degrees
from $10.99
(2)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 1991 Daihatsu Rocky Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 1991 Daihatsu Rocky based on customer reviews/ratings are:
A/C and Heater Relay
from $20.99
(2)
A/C and Heater Relay
“Price”