1991 Chevrolet Lumina Performance and Racing Products
Find Your Specific 1991 Chevrolet Lumina Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 1991 Lumina. Advance Auto Parts has popular Lumina parts like Performance Oil Filters, Performance Ignition Products, Performance Starters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Lumina model years including
1993,
1994,
1995,
1996,
1997,
1998,
1999,
2000,
2001 and more. Select a category of 1991 Chevrolet Lumina Performance and Racing Products below and start saving instantly.
Popular 1991 Chevrolet Lumina Performance and Racing Products Categories
Essential Performance and Racing Products for 1991 Chevrolet Luminas
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$46.99
Brake Bleeder Screws
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$78.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$83.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Mr. Gasket – Starter Motor Heat Shield (Part No.3678)
from
$49.99
Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.
Product Features:
See More
Product Features:
- Designed to prevent starter overheat due to extreme exhaust temperature
- Heat resistant material sandwiched between 2 aluminum plates
- Protects Starter From High Temperatures
- Made Of 2 Sheets Of Aluminum Heat Resistant Center
- Natural Finish
Upgrade your 1991 Chevrolet Lumina with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1991 Chevrolet Lumina, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Lumina functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Performance and Racing Products for the 1991 Chevrolet Lumina, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1991 Chevrolet Lumina at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $899.99, with
an average price of $175.29.
Our 30 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1991 Chevrolet Lumina without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Chevrolet Lumina, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, MSD Ignition, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
K&N and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $17.99, and at an average 4.8 stars rating.
With 121 customer reviews and counting, our 1991 Chevrolet Lumina Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1991 Chevrolet Lumina is always ready to roll. We’re committed to providing you with everything you need to keep your Lumina in top shape, all in one place.
Start shopping confidently below for your 1991 Chevrolet Lumina!
Best-Selling Performance Oil Filters for 1991 Chevrolet Luminas
Enhance the driving experience in your Chevrolet with 1 quality Performance Oil Filter components, starting at $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Popular 1991 Chevrolet Lumina Performance Ignition Products
Customize your Chevrolet with 4 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $199.99.
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$83.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$78.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1991 Chevrolet Lumina Performance Starters
Upgrade Chevrolet Luminas with top-quality Performance Starters parts, including 1 OEM and aftermarket selections for your 1991 model.
Mr. Gasket – Starter Motor Heat Shield (Part No.3678)
from
$49.99
Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.
Product Features:
See More
Product Features:
- Designed to prevent starter overheat due to extreme exhaust temperature
- Heat resistant material sandwiched between 2 aluminum plates
- Protects Starter From High Temperatures
- Made Of 2 Sheets Of Aluminum Heat Resistant Center
- Natural Finish
In-Demand Performance Radiators for 1991 Chevrolet Luminas
Select from 1 premium Performance Radiators parts for your 1991 Chevrolet Lumina.
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Most Sold 1991 Chevrolet Lumina Performance Engines
Explore our best-selling Chevrolet parts for the 1991 Lumina among 22 OEM and aftermarket options starting from $8.99.
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6 (Part No.K16-233-4)
from
$746.99
High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6
Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)
from
$636.99
7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6 (Part No.CL16-233-4)
from
$531.99
High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6
Competition Cams – High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L (Part No.CL16-115-4)
from
$531.99
High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L
Competition Cams – ENGINE ROCKER ARM (Part No.1605-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1413-12)
from
$206.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1216-12)
from
$132.99
ENGINE ROCKER ARM
Competition Cams – Engine Valve Spring Kit (Part No.980-12)
from
$57.99
Engine Valve Spring Kit
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1604-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7816-12)
from
$45.99
High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12
Competition Cams – ENGINE ROCKER ARM (Part No.1413-1)
from
$31.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1216-1)
from
$19.29
ENGINE ROCKER ARM
Competition Cams – 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-1)
from
$10.99
7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – Engine Valve Spring (Part No.980-1)
from
$9.99
Engine Valve Spring
Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod (Part No.7816-1)
from
$8.99
High Energy 6.165" Long, 5/16" Diameter Pushrod
Top-Rated Performance and Racing Products Brands For Your 1991 Chevrolet Lumina
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1991 Chevrolet Luminas. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1991 Lumina start at just $17.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1991 Chevrolet Lumina Performance and Racing Products
When it comes to maintaining or upgrading your 1991 Chevrolet Lumina, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1991 Chevrolet Lumina. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1991 Chevrolet Lumina Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1991 Chevrolet Lumina owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1991 Lumina, Advance Auto Parts carries a full inventory of 1 K&N Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $17.99, plus, with more than 29 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$17.99
(29)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“It’s easy to put on and take off.”
FAQs for 1991 Chevrolet Lumina Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1991 Chevrolet Luminas?
Out of 30 Performance and Racing Products that fit 1991 Chevrolet Luminas, the following parts are the top sellers:
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99
- Coil; GM Coil Pack; 2 Tower Style (22360191) – $83.99
- Starter Motor Heat Shield (17360071) – $49.99
What’s the price range for 1991 Chevrolet Lumina Performance and Racing Products?
Performance and Racing Product prices for the 1991 Chevrolet Lumina start at $8.99 and go up to $899.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1991 Chevrolet Lumina?
The average price for Performance and Racing Products for the 1991 Chevrolet Lumina is $175.29. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Lumina model years?
What are the cheapest Performance and Racing Products for my 1991 Chevrolet Lumina?
The cheapest 1991 Chevrolet Lumina Performance and Racing Products we carry in stock are:
- High Energy 6.165" Long, 5/16" Diameter Pushrod (50289328) – $8.99
- Engine Valve Spring (50286657) – $9.99
- 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (50289502) – $10.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120007) – $17.99
- ENGINE ROCKER ARM (50272523) – $19.29
What are the top-rated Performance and Racing Products that fit the 1991 Chevrolet Lumina?
Out of 121 reviews by customers, our 1991 Chevrolet Lumina Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1991 Chevrolet Lumina and their top-rated products:
- Performance Ignition Products
- Coil; GM Coil Pack; 2 Tower Style (22360191) – $83.99
- Unilite Ignition Module (17350025) – $92.99
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99
- Performance Oil Filters
- Coil; GM Coil Pack; 2 Tower Style (22360191) – $83.99
- Unilite Ignition Module (17350025) – $92.99
- Coil; GM External HEI Coil; High Performance (17350179) – $78.99
What types of Performance and Racing Products do you sell for my 1991 Chevrolet Lumina?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1991 Chevrolet Lumina:
Can I get help with 1991 Chevrolet Lumina Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Lumina Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Lumina Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
