from

$186.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$108.99

GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$87.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$36.49

Pigtail connector allows replacement of damaged fuel injector connector.

from

$264.99

Delphi’s OE line of EGR valves provides accurate exhaust flow control and emission control; Designed and built using high-temperature and corrosion-resistant materials that perform exceptionally under all engine environments; Each valve and seat is precis

Product Features:

No spacers or washers are required and they come with gaskets for an exact fit, saving time and labor
All parts used in the manufacture process are Delphi validated, tested and matched to the vehicle application, and manufactured in a Delphi ISO certified facility
Delphi’s OE line of EGR valves provides accurate exhaust flow and emission control
Available in port, back pressure, and linear configurations to cover many engine applications
Designed and built using high-temperature and corrosion-resistant materials that perform exceptionally under all engine environments
Each valve and seat is precision machined, helping to maintain long-term stability and performance
No audible regulator noise

from

$376.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$81.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$12.49

This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
Recommended replacement for the original hardware when servicing or replacing the fuel tank
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$5.49

GM Genuine Parts Seal Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems – aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$292.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Lower failure rates due to its innovative design and durability
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$36.99

New Platinum Pro Fuel Tank Straps

Product Features:

25 Gallon, With 8 Foot Box
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$49.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

from

$344.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$77.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$188.99

This frame crossmember is designed to match the fit of an original equipment crossmember on specified vehicles, and can help eliminate the need to fabricate a replacement or install a salvage yard part. It is engineered to replace a factory crossmember that has rusted or damaged from impact, and is manufactured from durable steel for a reliable repair.

Product Features:

Ideal replacement – this fuel tank crossmember is a direct replacement for the original crossmember that allows only the damaged part to be replaced
Durable construction – this crossmember is made of steel and painted in a corrosion-resistant finish for a long service life
Cost-effective and reliable – offers original manufacturer quality at lower cost than replacing the frame and saves time and money required to fabricate a replacement
Quality tested – this crossmember has undergone vehicle try-on, material, and corrosion testing to ensure proper fit and long-lasting durability

from

$1253.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump mounting o-ring

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$100.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box

from

$187.99

CARDONE New Vacuum Pumps are backed by CARDONE Engineered Technology, which ensures that all CARDONE Select New Vacuum Pumps meet or exceed O.E. form, fit and function. CARDONE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and corrected, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.

Product Features:

Units are tested 100% to ensure they are leak-free and meet vacuum performance standards
Engineered to meet or exceed O.E.M.performance
Designed for easy installation
Guaranteed fit and function

from

$24.49

This secondary air injection pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this secondary air injection pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$55.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$75.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump