1991 Chevrolet C3500HD Differentials

Name: Master Overhaul Kit for the Dana 80 Differential (4.125" OD only).
Brand: USA Standard Gear
SKU: 37025
Price: 446.99 USD

Find your specific 1991 Chevrolet C3500HD original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1991 Chevrolet C3500HD Differentials

from

$446.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.

from

$6.99

Product Features:

Outer slinger
Fits Dana Spicer 80

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$205.99

Product Features:

GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$5.99

DiffrlPinSupportBolt

from

$89.99

Product Features:

Complete shim kit for Dana Spicer 80
4.125″ O.D. pinion bearing application only

from

$376.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Dana Spicer 80
11.25″ ring gear diameter
37 spline pinion
12 ring gear bolts
3.73 ratio

from

$1099.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM 10.5″ 14 bolt truck
4.10 ratio and down only
Clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$1119.99

Differential

from

$52.99

10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:

Pinion nut for GM 10.5″ 14 bolt truck
15/16″ x 16 thread
1.5″ socket

from

$289.99

Yukon replacement standard open spider gear kit for Dana 70 and 80 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

from

$287.99

Yukon mini spool for GM 10.5″ 14 bolt truck.

Product Features:

Fits 10.5″ GM 14 bolt truck
Provides 100% traction to both wheels at all times
Installs into standard open carrier case

from

$51.99

Pilot bearing for 10.5″ 14 bolt truck, 2.050″ O.D.

Product Features:

Pilot bearing
Fits GM 10.5″ 14 bolt truck
2.050″ O.D.

from

$7.99

Dana 70 & Dana 80 pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer for Dana Spicer 70 and 80

from

$267.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
Related repair – smart to have on hand when installing a differential ring and pinion
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$8.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$288.99

Set-up carrier bearing kti (2 bearings, no races) for Dana 70 HD and Dana 80. 469. No return.

Product Features:

Set up bearing kit
Fits Dana Spicer 80
Easily slips on and off carrier journals to allow for easier carrier shim adjustment

from

$503.99

Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:

Standard open carrier case
Fits Dana Spicer 80
3.73 and down ratio only
Does not include spider gears

from

$249.99

Product Features:

Spider gear kit
Fit Dana Spicer 70 and 80 open differential with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$7.99

14T side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 10.5″ 14 bolt truck

from

$7.99

Differential Cover B

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$13.99

14T cover gasket.

Product Features:

Cover gasket
Fits GM 10.5″ 14 bolt truck

from

$48.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$66.99

Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:

Cross pin shaft
Fits Dana Spicer 70 and 80

from

$59.50

PINION SEAL

from

$26.99

Product Features:

Brand may vary by location

Popular 1991 Chevrolet C3500HD Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 1991 Chevrolet C3500HD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 187 different Differentials in our inventory ranging from $4.99 to $2,969.99. That means you can find the exact parts or products you need to keep that 1991 Chevrolet C3500HD running smoothly.

Differentials are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1991 Chevrolet C3500HD. National, Felpro, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1991 Chevrolet C3500HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 183 reviews in this category, some of the top rated parts include Tapered Cone Wheel Bearing Assembly with 4.0 stars and Shaft Repair Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1991 Chevrolet C3500HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1991 Chevrolet C3500HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 Chevrolet C3500HD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500HD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1991 Chevrolet C3500HD, our most popular Felpro Differentials include:

from $15.99

(1)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $6.79

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

Top 1991 Chevrolet C3500HD Differentials from National

National products are another trusted brand when it comes to Differentials for your 1991 Chevrolet C3500HD. Popular National parts include:

from $22.99

(12)

Bearings

Differential Bearings

from $6.99

(6)

Bearings

Differential Bearings

from $16.99

(6)

Bearings

Differential Bearings

FAQs for 1991 Chevrolet C3500HD Differentials

What are the most purchased Differentials for the 1991 Chevrolet C3500HD?

Out of 187 Differentials for the 1991 Chevrolet C3500HD, the most popular in our inventory are:

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $38.49

(15)

Rear Differential Cover

Differential Covers

from $13.79

(4)

Taper Bearing Set

Differential Bearings

What are the top-rated 1991 Chevrolet C3500HD Differentials?

Top-rated Differentials for your 1991 Chevrolet C3500HD based on customer reviews/ratings are:

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

“Worked sell”

from $27.49

(1)

Shaft Repair Sleeve

“Perfect Fit. Product was exactly as described”

from $41.49

(1)

Shaft Repair Sleeve

“Came with installation tool and instructions. Easy to install. Found that rather than beating the sleeve on the entire way, once started on, clamp in”

1991 Chevrolet C3500HD Differentials

More 1991 Chevrolet C3500HD Differentials

Essential 1991 Chevrolet C3500HD Differentials

USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)

Yukon Gear – Replacement Outer Oil Slinger For Dana 80 (Part No.33018)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Motive Gear – Differential Carrier (Part No.6258340)

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

Yukon Gear – Replacement Shim Kit For Dana 80 (Part No.55025)

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 80 In A 3.73 Ratio (Part No.36092)

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Yukon Gear – Differential (Part No.26044)

Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 70 And 80 With 35 Spline Axles, XHD Design (Part No.16181)

Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)

Yukon Gear – Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D. (Part No.18041)

Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-106)

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Yukon Gear – Set Up Bearing (Part No.56040)

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

USA Standard Gear – Replacement Standard Spider Gear Set For Dana 70, 35 Spline (Part No.39011)

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

Yukon Gear – Differential Cover B (Part No.33572)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – GM 10.5′ 14 Bolt Truck Cover Gasket (Part No.23016)

National – Bearings (Part No.HM903249)

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

SKF – PINION SEAL (Part No.J7010218383SKF)

Driveworks – Differential Pinion Seal (Part No.S-710508)

Popular 1991 Chevrolet C3500HD Differentials Categories