1991 Chevrolet C3500 Differentials

Essential 1991 Chevrolet C3500 Differentials

Yukon Gear – Pinion Install Kit For Dana 70-HD & Super-70 Differential (Part No.13034)

Pinion Install Kit For Dana 70-HD & Super-70 Differential

from

$324.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70HD
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

NTN – Differential Bearing (Part No.J7060741150NTN)

Differential Bearing

from

$39.19
Differential Bearing

Dorman – Differential Pinion Yoke Assembly (Part No.697-529)

Differential Pinion Yoke Assembly

from

$203.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Pinion Depth Shims For 10.5" GM 14 Bolt Truck (Part No.55058)

Pinion Depth Shims For 10.5" GM 14 Bolt Truck

from

$37.99
14T GM pinion shim kit.

Product Features:
  • Pinion depth shims for GM 10.5″ 14 bolt truck
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Pro-King – Differential Bearing Cup (Part No.742G256)

    Differential Bearing Cup

    from

    $8.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

    Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

    from

    $13.99
    Product Features:
    • Cover gasket
    • Fits Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)

    10.5" GM 14 Bolt Truck Ring Gear Bolt

    from

    $10.99
    14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

    Product Features:
    • Ring gear bolt for GM 10.5″ 14 bolt truck
    • 4.11 and down ratio
    • 1/2″ x 18 thread
    • 2.085″ overall length
    See More

    Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

    Replacement Pinion Nut For Dana 80

    from

    $26.99
    Replacement pinion nut for Dana 80, 1 7/8″ socket.

    Product Features:
    • Pinion nut for Dana Spicer 80
    • 1 7/8″ socket
    See More

    Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

    Side Gear Thrust Washer For Dana 60, 70 & 80

    from

    $4.99
    Product Features:
    • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
    • Fits standard open differentials only
    See More

    Yukon Gear – Minor Install Kit For Dana 80 Differential (4.125" O.D – Pinion Race) (Part No.12030)

    Minor Install Kit For Dana 80 Differential (4.125" O.D - Pinion Race)

    from

    $188.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
    • Included are a pinion seal, complete shim kit, marking compound and brush.
    See More

    Yukon Gear – Differential (Part No.26044)

    Differential

    from

    $1119.99
    Differential

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Motive Gear – Differential Carrier (Part No.6258340)

    Differential Carrier

    from

    $205.99


    Product Features:
    • GM10.5″ 14 BOLT OPEN EMPTY CASE 4:56 & UP
    See More

    Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

    DiffrlPinSupportBolt

    from

    $5.99
    DiffrlPinSupportBolt

    Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33108)

    10.5" GM 14 Bolt Truck Crush Sleeve

    from

    $7.99
    10.5″ GM 14 bolt truck crush sleeve, 1988 & OLDER. Approx 0.825″ long.

    Product Features:
    • Crush sleeve for 1988 and down GM 10.5″ 14 bolt truck
    • 0.825″ tall
    See More

    Pro-King – Differential Internal Nest Kit (Part No.718C717B)

    Differential Internal Nest Kit

    from

    $422.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Motive Gear – Differential Carrier Bearing Kit – Timken (Part No.R10.5CKT)

    Differential Carrier Bearing Kit - Timken

    from

    $93.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • CARRIER BEARING KIT FRD 10.5″ W/TIM
    See More

    Dorman – General Motors Full Float Axle Shaft (Part No.630-147)

    General Motors Full Float Axle Shaft

    from

    $243.99
    Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

    Product Features:
    • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
    • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
    • Durable construction – designed to rigorous standards and tested to ensure performance
    • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
    See More

    USA Standard Gear – Ring/Pinion Sets (Part No.36093)

    Ring/Pinion Sets

    from

    $454.99
    Ring/Pinion Sets

    Pro-King – Differential Case (Empty) (Part No.744A714)

    Differential Case (Empty)

    from

    $345.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

    Dana 70 & Dana 80 Pinion Gear Thrust Washer

    from

    $7.99
    Dana 70 & Dana 80 pinion gear Thrust washer.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 70 and 80
    See More

    Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

    Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

    from

    $5.99
    Product Features:
    • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

    Replacement Carrier Shim Kit For Dana 70 & 70HD

    from

    $126.99
    Product Features:
    • Carrier shim kit
    • Fits Dana Spicer 70 and 70HD
    See More

    Pro-King – Differential Pinion Seal (Part No.743B070A)

    Differential Pinion Seal

    from

    $23.49
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    National – Bearings (Part No.R-1581-TV)

    Bearings

    from

    $44.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • High radial load capacity makes them suitable for high speed applications
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)

    Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5"

    from

    $304.99
    Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.

    Product Features:
    • Clutch kit
    • Fits GM 10.5″ 14 bolt truck with Eaton positraction
    • Carbon fiber clutches
    See More

    1991 Chevrolet C3500 Differentials

    Maybe you’re in the middle of a full rebuild of that 1991 Chevrolet C3500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 190 different Differentials in our inventory ranging from $1.89 to $1,374.99. That means you can find the exact parts or products you need to keep that 1991 Chevrolet C3500 running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1991 Chevrolet C3500. Valvoline, Driveworks, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1991 Chevrolet C3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,982 reviews in this category, some of the top rated parts include Rear Differential Cover with 4.4 stars and Bearings with 4.3 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1991 Chevrolet C3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1991 Chevrolet C3500 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1991 Chevrolet C3500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C3500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    FAQs for 1991 Chevrolet C3500 Differentials

    What are the most purchased Differentials for the 1991 Chevrolet C3500?

    Out of 190 Differentials for the 1991 Chevrolet C3500, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Differential Bearings
    Differential Cover Gasket
    from $6.79
    (13)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil

    What are the top-rated 1991 Chevrolet C3500 Differentials?

    Top-rated Differentials for your 1991 Chevrolet C3500 based on customer reviews/ratings are:
    Rear Differential Cover
    from $36.99
    (15)
    Rear Differential Cover
    “For as it should”
    Bearings
    from $22.99
    (3)
    Bearings
    “works great !!!”
    Taper Bearing Cone
    from $17.99
    (2)
    Taper Bearing Cone
    “good deal”