1991 Chevrolet Blazer Body Parts

Essential Body Parts for 1991 Chevrolet Blazers

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.110104)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech Mud Flap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the Weathertech Mud Flap will offer undeniable vehicle protection. Features the patented QuickTurn hardened stainless steel fastening system. WeatherTech Mud Flaps provide protection for your vehicles most vulnerable rust area protecting the fender and rocker panel from stone chips, slush, dirt and debris.

Product Features:
  • Molded From A Proprietary Thermoplastic Resin, Offers Undeniable Vehicle Protection
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Laser Measured To Custom Fit And Protect Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Your Vehicle s Wheels
  • No Drilling Required And Installs In Minutes
See More

Dorman – Door Lock Actuator, Front, Rear (Part No.746-014)

Door Lock Actuator, Front, Rear

from

$57.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

KAI – New CAPA Certified Prem Replacement Front Driver Side Inner Bumper Mtg Bracket (Part No.GM1066110DSC)

New CAPA Certified Prem Replacement Front Driver Side Inner Bumper Mtg Bracket

from

$34.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Front Driver Side Inner Bumper Mounting Bracket, Made Of Steel. It is Designed To Replace Your Existing Bumper Mounting Bracket. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Lock Switch (Part No.SAA3915)

Door Lock Switch

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Power Window Switch- Front Right and Rear Left/Right, 1 Button (Part No.49241)

Power Window Switch- Front Right and Rear Left/Right, 1 Button

from

$17.49
This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:
  • Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles.
  • Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
  • Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1398)

ABS Wheel Speed Sensor Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ARIES – Chevy/GMC Blazer K5 Polished Stainless Steel Nerf Bars (Part No.204044-2)

Chevy/GMC Blazer K5 Polished Stainless Steel Nerf Bars

from

$189.99
ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Chevy Blazer K5 and GMC Blazer K5 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:
  • Unique bends to contour to the body of the vehicle
  • Custom, non-skid step pads for safe entry and exit
  • 3″ diameter, heavy-wall tube design
  • 304 stainless steel construction to be strong and truly rust-resistant
  • Mirror-like polished stainless steel finish for a bright, clean accent
  • No-drill, vehicle-specific application for a custom fit
  • Heavy-duty steel mounting brackets for a solid step
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4105R)

Body Cab Mount Set

from

$156.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

KAI – Tailgate Link (Part No.GMK414583781P)

Tailgate Link

from

$16.99
New Goodmark Driver And Passenger Side Pair Of Tailgate Link Rods, For Fleetside Models

Product Features:
  • For Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$46.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Weatherstrip (Part No.GM1390154)

Window Weatherstrip

from

$36.99
New Standard Replacement Front Driver Side Door Weatherstrip, Door Glass Outer Belt Weatherstrip

Product Features:
  • Door Glass Outer Belt Weatherstrip
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – Multi-Purpose Pigtail (Part No.PT2296)

Multi-Purpose Pigtail

from

$73.99
ACDelco Professional Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Protective outer coverings provide long-lasting durability
  • Color-coded wires allow for easy installation
  • Manufactured to meet expectations for fit, form, and function
See More

KAI – Window Channel (Part No.GMK4145431811L)

Window Channel

from

$41.99
New Goodmark Driver Side Front Door Glass/Window Run Channel

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Interior Door Handle (Part No.GM1353105)

Interior Door Handle

from

$11.99
New Standard Replacement Passenger Side Front Interior Door Handle

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Insulation Clip (Part No.GMKHWB2401)

Hood Insulation Clip

from

$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

Product Features:
  • 2 Inch Diameter
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest – Idle Air Control Valve Connector (Part No.PT302)

Idle Air Control Valve Connector

from

$36.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

KAI – Tailgate Hinge Kit (Part No.GMK414582381L)

Tailgate Hinge Kit

from

$15.99
New Goodmark Driver Side Tailgate Trunnion, For Fleetside Models

Product Features:
  • For Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum

from

$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Latch Assembly (Part No.GMK414331969)

Hood Latch Assembly

from

$77.99
New Goodmark Hood Latch Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Lock Kit (Part No.DLC1167)

Door Lock Kit

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Bumper Face Bar (Part No.GM1002802V)

Bumper Face Bar

from

$375.99
New Economy Replacement Front Bumper Face Bar, Chrome, Without Air Vent Holes, With Impact Strip And License Holes, Without Guard Holes

Product Features:
  • Chrome, Without Air Vent Holes, With Impact Strip And License Holes, Without Guard Holes, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fuel Filler Door (Part No.GM1759101)

Fuel Filler Door

from

$37.99
New Standard Replacement Fuel Door

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Burco – Door Mirror Replacement Glass (Part No.2297H)

Door Mirror Replacement Glass

from

$49.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$54.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.GMK4173460691R)

Rocker Panel

from

$372.99
New Goodmark Passenger Side Rocker Box

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – Door Jamb Switch (Part No.D6007A)

Door Jamb Switch

from

$7.99
An ACDelco GM Original Equipment Door Jamb Switch is a GM-recommended replacement for your vehicle’s original component. It automatically turns your vehicle’s interior lights on and off when you enter and exit your vehicle. This original equipment door jamb switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Upgrade your 1991 Chevrolet Blazer with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1991 Chevrolet Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 127 Body Parts for the 1991 Chevrolet Blazer, designed to meet your needs without breaking the bank. From Vehicle Hood replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1991 Chevrolet Blazer at great prices. Our Body Parts inventory for this model ranges from just $1.79 to $661.99, with an average price of $70.86. Our 127 Body Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 1991 Chevrolet Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Chevrolet Blazer, we stock popular OEM and aftermarket Body Parts from top names like Dorman, Needa Parts, Carquest, and more. Dorman Body Parts start at just $3.99 and boast an impressive 4 stars average rating from customers. Needa Parts and Carquest also bring quality to the table, with Body Parts available starting at $1.79, and at an average 4 stars rating. With 240 customer reviews and counting, our 1991 Chevrolet Blazer Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1991 Chevrolet Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your Blazer in top shape, all in one place. Start shopping confidently below for your 1991 Chevrolet Blazer!

Best-Selling Vehicle Hoods for 1991 Chevrolet Blazers

Enhance the driving experience in your Chevrolet with 2 quality Vehicle Hood components, starting at $10.99.

Dorman – Hood Release Cable With Handle (Part No.912-020)

Hood Release Cable With Handle

from

$40.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
  • Durable construction -manufactured within strict tolerances for reliable longevity.
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

KAI – Hood Insulation Clip (Part No.GMKHWB2401)

Hood Insulation Clip

from

$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

Product Features:
  • 2 Inch Diameter
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Popular 1991 Chevrolet Blazer Vehicle Latches and Handles

Customize your Chevrolet with 12 Vehicle Latches and Handles products like Exterior Door Handles, Interior Door Handles, and Window Handles, all priced under $243.99.

Dorman – Door Latch Assembly (Part No.940-102)

Door Latch Assembly

from

$156.99
This door latch assembly has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to seamlessly replace the stock latch assembly on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door latch assembly has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original latch on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

AutoCraft – Window Handle (Part No.76945)

Window Handle

from

$12.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:
  • Ideal replacement – this window crank handle matches the fit and function of the original equipment component
  • Durable construction – this window crank handle is made of durable material to withstand extended use
  • Easy to install – this window crank requires no special tools to install
  • Versatile design – this window crank handle is suitable for use in various locations in the vehicle
See More

Dorman – Hood Latch Assembly (Part No.315-100)

Hood Latch Assembly

from

$81.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:
  • Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch.
  • Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration.
  • Easy installation – requires no special tools to replace
  • Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
See More

KAI – Vent Glass (Part No.GMK414441980L)

Vent Glass

from

$20.99
New Goodmark Driver Side Vent Window Handle With Chrome Lock Button, Made Of Tempered Glass

Product Features:
  • Made Of Tempered Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Vent Glass (Part No.GMK414441980R)

Vent Glass

from

$20.99
New Goodmark Passenger Side Vent Window Handle With Chrome Lock Button, Made Of Tempered Glass

Product Features:
  • Made Of Tempered Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Door Latch Assembly (Part No.940-103)

Door Latch Assembly

from

$139.99
This door latch assembly has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to seamlessly replace the stock latch assembly on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door latch assembly has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original latch on specific vehicle years, makes and models.
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Door Latch Assembly Pair (Part No.940-102KT)

Door Latch Assembly Pair

from

$243.99
This door latch assembly has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to seamlessly replace the stock latch assembly on specific vehicle years, makes and models.

Product Features:
  • Convenient pack – this value pack includes the left and right door latch assemblies for certain popular vehicle applications.
  • Perfect fit – engineered to provide the same fit and function of the original equipment latch assemblies.
  • Safety compliant – parts have undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

KAI – Exterior Door Handle (Part No.GM1310104)

Exterior Door Handle

from

$34.99
New Standard Replacement Driver Side Exterior Door Handle

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Door Handle, Interior – GM 1981-1991 – Orientation: Front Right – OE No.:15597654 -Finish: Chrome (Part No.77065)

Door Handle, Interior - GM 1981-1991 - Orientation: Front Right - OE No.:15597654 -Finish: Chrome

from

$25.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Interior Door Handle (Part No.GMK414544182L)

Interior Door Handle

from

$14.99
New Goodmark Driver Side Inner Door Handle

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Interior Door Handle (Part No.GMK414544182R)

Interior Door Handle

from

$14.99
New Goodmark Passenger Side Inner Door Handle

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Crank Handle (Part No.GMK414542181)

Window Crank Handle

from

$9.99
New Goodmark Chrome Window Crank Handle With Black Knob

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Top Picks for 1991 Chevrolet Blazer Bodies and Fender Parts

Upgrade Chevrolet Blazers with top-quality Bodies and Fender Parts parts, including 24 OEM and aftermarket selections for your 1991 model.

ARIES – Chevy Blazer/GMC Blazer K5 3" Round Nerf Bars with Step Pads (Part No.204044)

Chevy Blazer/GMC Blazer K5 3" Round Nerf Bars with Step Pads

from

$148.99
ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Blazer K5 and GMC Blazer K5 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:
  • Unique bends to contour to the body of the vehicle
  • Custom, non-skid step pads for safe entry and exit
  • 3″ diameter, heavy-wall tube design
  • High-strength carbon steel construction
  • Highly rust-resistant semi-gloss black powder coat and E-coat finish
  • No-drill, vehicle-specific application for a custom fit
  • Heavy-duty steel mounting brackets for a solid step
See More

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

ARIES – Chevy/GMC Blazer K5 Polished Stainless Steel Nerf Bars (Part No.204044-2)

Chevy/GMC Blazer K5 Polished Stainless Steel Nerf Bars

from

$189.99
ARIES 3″ side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3″ round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets — as well as the side bars and step pads — are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Chevy Blazer K5 and GMC Blazer K5 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.

Product Features:
  • Unique bends to contour to the body of the vehicle
  • Custom, non-skid step pads for safe entry and exit
  • 3″ diameter, heavy-wall tube design
  • 304 stainless steel construction to be strong and truly rust-resistant
  • Mirror-like polished stainless steel finish for a bright, clean accent
  • No-drill, vehicle-specific application for a custom fit
  • Heavy-duty steel mounting brackets for a solid step
See More

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum

from

$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:
  • Classic Styling Of Brite-Tread Aluminum
  • Front Or Rear Wheel Protection
  • Radius Notch Contours To The Fender Well
  • Protected By A BriteGard Powder Coat Finish
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4118R)

Body Cab Mount Set

from

$155.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$47.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.RRP083)

Floor Pan

from

$101.99
New Standard Replacement Driver Side Extended Cab Floor, 24 X 33

Product Features:
  • 24 X 33, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4118G)

Body Cab Mount Set

from

$161.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps (Part No.DZ3700303)

With Step Pads, 3" Round Bent/ 32" L, Polished, Ss, With Welded End Caps

from

$661.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More

Dee Zee – With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel (Part No.DZ3700301)

With Step Pads, 3" Round Bent/ 32" L, Powder Coated, Black, Steel

from

$411.99
A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 1 Pad On The Bar
  • Frame Mounted For Maximum Strength
  • Powder Coated Steel Braces Resist Rust
  • Powder Coated Steel Braces Resist Rust
  • Molded Plastic Step Pads For Secure Footing
  • Fit Most Full And Mid Size Pickups
See More

Le Bra – Front End Cover (Part No.55054-01)

Front End Cover

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Covercraft – Custom Hood Protector (Part No.45120-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$54.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$46.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.RRP147)

Floor Pan

from

$43.99
New Standard Replacement Driver Side Cab Floor, Front Section, 22 1/4 X 29

Product Features:
  • Front Section, 22 1/4 X 29, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP101)

Rocker Panel

from

$27.99
New Standard Replacement Driver Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2

Product Features:
  • Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP100)

Rocker Panel

from

$26.99
New Standard Replacement Passenger Side Rocker Panel, Slip-On Type, 42 1/2 X 5 1/2

Product Features:
  • Slip-On Type, 42 1/2 X 5 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP113)

Wheel Arch Panel

from

$24.99
New Standard Replacement Passenger Side Slip-On Rear Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Trim (Part No.GMK417595589R)

Wheel Arch Trim

from

$21.99
New Goodmark Rear Passenger Side Wheel Opening Molding, Made Of Aluminum

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104L)

Backing Plate

from

$14.99
New Standard Replacement Driver Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104R)

Backing Plate

from

$13.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104)

Backing Plate

from

$8.99
New Standard Replacement Universal Rocker Panel Backing Plate, 26 1/8 X 4 1/4

Product Features:
  • 26 1/8 X 4 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More

In-Demand Vehicle Windows for 1991 Chevrolet Blazers

Select from 10 premium Vehicle Windows parts for your 1991 Chevrolet Blazer, with prices ranging from $8.99 to $154.99.

Dorman – Front Driver Side Window Regulator: Manual, 1 Pack (Part No.740-651)

Front Driver Side Window Regulator: Manual, 1 Pack

from

$55.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Help – Window Rollers (Part No.74430)

Window Rollers

from

$9.49
This window regulator roller is designed to match the fit and function of the original roller on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this window regulator roller is designed to match the fit and function of the original part on specified vehicles.
  • Restores functionality – reliable replacement for a roller that has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.740-515)

Window Regulator: Power, 1 Pack

from

$61.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Window Regulator hardware Kit – Scissor Type (Part No.702-013)

Window Regulator hardware Kit - Scissor Type

from

$8.99
This window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this window regulator hardware kit is designed to match the original hardware required to service or install the window regulator on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have been lost or broken
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.740-516)

Window Regulator: Power, 1 Pack

from

$60.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Window Regulator: Manual, 1 Pack (Part No.740-650)

Window Regulator: Manual, 1 Pack

from

$55.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Window Glass Lift Plate Metal (Part No.2111001)

Window Glass Lift Plate Metal

from

$53.99
This window glass lift plate is designed to match the fit and function of the original plate on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this window glass lift plate is designed to match the fit and function of the original plate on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to rust, fatigue or collision damage
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Window Channel (Part No.GMK4145431811R)

Window Channel

from

$35.99
New Goodmark Passenger Side Front Door Glass/Window Run Channel

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Channel (Part No.GMK4145431811L)

Window Channel

from

$41.99
New Goodmark Driver Side Front Door Glass/Window Run Channel

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Window Weatherstrip (Part No.GMK4145418811P)

Window Weatherstrip

from

$154.99
New Goodmark Driver And Passenger Side Pair Of Vent Window Weatherstrips

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Sold 1991 Chevrolet Blazer Vehicle Doors

Explore our best-selling Chevrolet parts for the 1991 Blazer among 23 OEM and aftermarket options starting from $1.79.

Locksmart – Door Lock Kit (Part No.DL15800)

Door Lock Kit

from

$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • All door locks are perfectly matched to the original for precision installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Dorman – Help – Door Hinge Spring (Part No.38436)

Door Hinge Spring

from

$8.99
This door hinge spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge spring matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Door Jamb Switch (Part No.S1067)

Door Jamb Switch

from

$10.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Help – Door Lock Rod Clips (Part No.75450)

Door Lock Rod Clips

from

$6.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Needa Parts – Door Striker Bolt, 1/2-13 In. (Part No.38420)

Door Striker Bolt, 1/2-13 In.

from

$13.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability & reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Door Lock Rod Clips (Part No.75453)

Door Lock Rod Clips

from

$3.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Idle Air Control Valve Connector (Part No.PT302)

Idle Air Control Valve Connector

from

$36.49
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
  • Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
  • RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Door Seal (Part No.GM1390101)

Door Seal

from

$40.99
New Standard Replacement Driver Or Passenger Side Door Weatherstrip

Product Features:
  • Front
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Stop (Part No.GMK414440373S)

Door Stop

from

$9.99
New Goodmark 2 Piece Front Door Bumper Kit, 2 Kits Required

Product Features:
  • 2 Kits Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1398)

ABS Wheel Speed Sensor Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – Door Seal (Part No.GM1390128)

Door Seal

from

$32.99
New Standard Replacement Driver Side Outer Weather Strip

Product Features:
  • Front, Driver Side
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Window Switch Connector (Part No.PTC1506)

Door Window Switch Connector

from

$51.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – Door Seal (Part No.GM1391128)

Door Seal

from

$32.99
New Standard Replacement Passenger Side Outer Weatherstrip

Product Features:
  • Passenger Side, Outer
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Lock Switch (Part No.SBC4443)

Door Lock Switch

from

$16.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Door Hinge (Part No.GMK4144401772L)

Door Hinge

from

$56.99
New Goodmark Driver Side Lower Front Door Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Hinge (Part No.GMK4144401772R)

Door Hinge

from

$56.99
New Goodmark Passenger Side Front Lower Door Hinge

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Jamb Switch Connector (Part No.PTA1379)

Door Jamb Switch Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – Door Seal (Part No.GM1390127)

Door Seal

from

$32.99
New Standard Replacement Weather Strip, Inner Driver Side Window

Product Features:
  • Inner Driver Side Window
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Seal (Part No.GM1391127)

Door Seal

from

$32.99
New Standard Replacement Weatherstrip, Inner Window, Passenger Side

Product Features:
  • Inner Window, Passenger Side
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Door Lock Switch (Part No.49227)

Door Lock Switch

from

$31.49
This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications.
  • Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Jamb Switch (Part No.SAA1154)

Door Jamb Switch

from

$6.29
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Top-Rated Body Parts Brands For Your 1991 Chevrolet Blazer

Shop for the best-rated brands offering Body Parts and other products for your 1991 Chevrolet Blazers. Below you’ll find some of our best rated Body Parts from Dorman, Needa Parts, and Carquest, and more. Body Parts from these brands that fit a 1991 Blazer start at just $1.79 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1991 Chevrolet Blazer Body Parts

When it comes to maintaining or upgrading your 1991 Chevrolet Blazer, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1991 Chevrolet Blazer. With over 25 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $53.48. Plus, with over 81 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Window Regulator: Power, 1 Pack
from
$61.99
This product is not rated

Window Regulator: Power, 1 Pack

“”

Window Regulator hardware Kit - Scissor Type
from
$8.99
This product is not rated

Window Regulator hardware Kit – Scissor Type

“”

Window Regulator: Power, 1 Pack
from
$60.99
This product is not rated

Window Regulator: Power, 1 Pack

“”

Popular Needa Parts 1991 Chevrolet Blazer Body Parts

Needa Parts auto parts is one of the highest quality Body Part brands in the market. Any 1991 Chevrolet Blazer owner should feel confident when installing genuine Needa Parts parts in their vehicle. To ensure the best fit and performance for your 1991 Blazer, Advance Auto Parts carries a full inventory of 4 Needa Parts Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Needa Parts Body Parts range from $1.79 to $23.29, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height
from
$1.79
This product is not rated

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

“”

Tailgate Cable, 22 In.
from
$23.29
This product is not rated

Tailgate Cable, 22 In.

“”

Panel Trim Retainer - Interior - GM/Chrysler
from
$2.49
This product is not rated

Panel Trim Retainer – Interior – GM/Chrysler

“”

FAQs for 1991 Chevrolet Blazer Body Parts

Which Body Parts are best-sellers for 1991 Chevrolet Blazers?

Out of 127 Body Parts that fit 1991 Chevrolet Blazers, the following parts are the top sellers:

What’s the price range for 1991 Chevrolet Blazer Body Parts?

Body Part prices for the 1991 Chevrolet Blazer start at $1.79 and go up to $661.99 for the most premium parts.

What’s the average price of a Body Part for a 1991 Chevrolet Blazer?

The average price for Body Parts for the 1991 Chevrolet Blazer is $70.86. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Blazer model years?

Yes, we currently carry Body Parts for 25 model years of Chevrolet Blazers between 1969 and 2019. Body Parts are bought most frequently for the following model years: 2019, 2005, 2004, 2003, 2002, 2001, 2000, 1999, and 1998.

What are the cheapest Body Parts for my 1991 Chevrolet Blazer?

The cheapest 1991 Chevrolet Blazer Body Parts we carry in stock are:

What are the top-rated Body Parts that fit the 1991 Chevrolet Blazer?

Out of 240 reviews by customers, our 1991 Chevrolet Blazer Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1991 Chevrolet Blazer and their top-rated products:

What types of Body Parts do you sell for my 1991 Chevrolet Blazer?

Can I get help with 1991 Chevrolet Blazer Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Blazer Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Blazer Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.