1991 BMW 325iX Engine Parts

The INA Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

• OE-Equivalent and a direct fit application
• High quality sealed precision bearing assembly
• OE specified pulley
• Durable long life performance

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This specific belt is for applications with standard temperature and load requirements with a reinforced round tooth profile for more demanding drives

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

• Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
• Various designs specifically adapted to the area of application ensure excellent functionality and performance
• High-performance FPM guarantees optimum leak tightness

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

Freeze Plug

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Rocker Arm

Oil Relief Valve Kit

Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

• High-quality design and engineering for perfect performance
• Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
• Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications

Seal Ring

MAHLE Original pistons are OE quality and have many premium OE features. Pistons have to put up with extreme pressures, as their working conditions have become significantly tougher in recent years. Naturally, the demands on pistons have also risen progressively: they must be lighter, must have lower oil consumption and must be absolutely safe and reliable. MAHLE Original pistons are reliable. In many instances, MAHLE is asked to supply the pistons for an OE manufacturer’s high output, premium engines. The Chrysler 2.5L Turbo, Chevrolet 5.7L LT5 (ZRI Corvette), Chevrolet 5.7L LT1 and Chevrolet 4.3L 200HP truck engines all have our pistons. MAHLE’s eutectic (12% silicon) aluminum alloy is performance proven in literally millions of engines around the world including high output diesel engines and Formula One racing.

Product Features:

• COMPENSATED RING GROOVES assure proper ring loading and oil control.
• EXPANSION CONTROLLED DESIGNS for small fitting clearances. With the tighter fitting clearances comes reduced engine noise, reduced wear, reduced emissions and improved oil control in the long term.
• PIN OFFSET for reduced engine noise.

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

• AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
• All kits are application specific.
• Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
• Each set comes with special assembly lube to ensure proper torque when tightening.
• All kits are boxed and shrink wrapped.

Tensioner Roller Bol

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Low Wear and Friction
• Advanced Surface Coatings

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
• QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
• ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
• INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
• COVERAGE — Available for domestic and foreign nameplate vehicles

Clevite is the number one name in replacement engine bearings – delivering on the track and in machine shops around the country. With track proven performance in engines with thousands of horsepower, it is obvious Clevite has the strength to handle any light vehicle application.As more and more OE manufacturers shift to aluminum bearings in OE engines, Clevite has introduced a new line of engine bearings designed to be the highest quality replacement bearings in the industry. Clevite Bimetal engine bearings carry on the tradition and reputation that Clevite has built throughout the course of time.Clevite Bimetal engine bearings feature a 100% lead free aluminum silicon bi-metal material, which includes 60% more silicon than the leading competitor’s bi-metal material for better conditioning of journal surfaces. These Bimetal bearings also offer greater wear resistance than the leading competitor’s bi-metal material, as well as greater seizure resistance. Clevite Bimetal bearings feature 100% bored ID’s for precision and surface characteristics and where appropriate – straight shell main bearings utilizing an “umbrella” groove that allows for superior oil control and improved pressure.Clevite® Bimetal engine bearings are of aluminum, tin, silicon Bimetal type of material and construction. These offer the engine rebuilder an Oe type of bearing for engines going into light duty applications. They are only recommended for applications where all engine components have been reconditioned to engine manufacturers original specifications.Bimetal engine bearings are not recommended for Heavy Duty service where heavy demands are placed on the engine or High Performance applications where Clevite TriMetal is still the ultimate performance choice.

Product Features:

• Original Equipment Manufacturer
• Maximum Load-Bearing Capacity
• Fatigue-Resistant, adaptable
• Resistant to Wear and Corrosion
• Advanced Surface Coatings

Valve Keeper

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

• Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

The Canyon Engine Valve Guide is manufactured using bronze material and is an exact duplication of the original equipment part. The valve guides are complete with the snap ring installed (Mercedes) and the correct color code indicating the oversize diameter.

Product Features:

• OE Quality
• Same design as the original equipment part
• Manufactured from bronze material
• Complete with snap ring (Mercedes)

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Unsurpassed quality you can trust