1991 BMW 325iX Belts and Hoses

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

• This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
• Polyester cords provide extreme tension-holding capability for longer belt life
• The raw edge belt design delivers the maximum gripping power
• The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

This Litens pulley is manufactured by the original equipment part supplier to ensure proper fit and performance. This pulley is produced for BMW serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. As with the original equipment part, this replacement part is made in Germany using the O.E. specified design and meets all performance and durability requirements. Proper installation is ensured by the inclusion of a locator pin molded onto the engine side of the idler. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by the original equipment part suppliers in the world to ensure proper form, fit, and performance
• Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
• Installation instructions included.
• 80mm O.D.; 10.2mm I.D.; 24.5mm width; smooth running surface; Thermoplastic.

This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: Both the original part removed and this replacement hydraulic actuator are made in Germany. Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by the original equipment part supplier to ensure proper form, fit and performance
• Hydraulic tensioning technology
• Installation instructions included.
• No Tensioner or pulley Included
• Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
• Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular BMW tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Oil Cooler Hose

All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:

• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 125C

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Product Features:

• Improved sealing surface for greater leak resistance
• High flexibility for easy installation
• Maximum vehicle coverage with minimum inventory
• Resistant to heat, oil and ozone
• Rated for SAE 20R5 Class D-2 performance
• Temperature Range: up to +257 Deg. F (+125 Deg. C)
• Note: Gates recommends replacing clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

This pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 70mm flat pulley (without flange) for BMW applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

• Manufactured by the original equipment part supplier to ensure proper form, fit and performance
• Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
• Installation instructions included.

HOSE – FUEL

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Clamp – Hose

Clamp – Hose

Hose – Vacuum

Booster Vacuum Hose

Vacuum Hose

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.

Elaplast brand engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Elaplast line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 125C

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C